Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹7.3 L+₹3,136 (0.43%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹7.9 L+₹71,635.50 (9.92%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹8.3 L+₹1.0 L (14.2%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹8.4 L+₹1.2 L (16.7%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest |
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
3 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Rajouri
HQ CWE Rajouri PIN 900129 C/o 56 APO
SPECIAL REPAIR TO BLDG NO T-16 AT KALAL BASE UNDER GE 862 EWS
2023_MES_634600_1
CWE/RAJ-51/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per Tender Documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹19,200
Yes
26 Apr 2024
28 Dec 2023
12 Feb 2024
28 Dec 2023
3 Feb 2024
18 Jan 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below of above ground levels) and removing out side MD land complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick (Mirror polished) in floors and jointed with grey cement to the shade of the slab including machine cutting to make it square or rectangular rubbin gan dcutting and polishing to achieve mirror finish laid over and including screed bed or bedding layer of 20mm thick in cement mortar (1:4) after dismentling / demolition of old unserviceable kota stone of any size complete all as specified and directed.
M&L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 50 mm thick as in plinth protection finished even and smooth without using extracement, complete all as specified and as directed.
Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles
M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cm 1:6, complete all as specified and as directed.
All as per Srl item No 5 here-in-before but except stone.
Dismantling of wall and ceilling boards of only thickness including fillets etc complete all as specified and as directed.
M&L Providing & fixing of 4mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction complete all as specified & directed.
Dismantling timber scantling 40 Sq. cm and over in section, in any position, complete all as specified and as directed.
S & F for rolled mild steel work as in roof truss (framed), trussed purlins, crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle,cnanelor flat section gusset plate) including distance piece, cleats etc and welding if required complete.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in ridge,cladding to wall, fixed with self tapping screws as specified
Taking down cement plaster on stone walls or brick walls, including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.
M&L rendering 20 mm thick plastering on stone masonry surface in CM (1:6) and rendering is to be finished even and smooth without using extra cement
All as per srl item No 15 here-in-before but in cm 1:4 (external surfaces)
Demolition of reinforced concrete any description and in any position not otherwise specifically provided for.
M&L Formwork to sides and soffits of floor or roof beam , beam hunching, girders, lintel, cantilevers, shelves including suports,overhangs etc.
M & L for mild steel TMT bars 10mm dia and over , cut to length ,bend to shape required, including cranking ,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .
M&L RCC (1: 1.5 :3) type B-1 using 20mm gradded stone aggregate as in beams, deck slabs , chajjas and in shelves and like.
Dismantling wrought iron or mild steel of any description not otherswise provide for , etc complete all as specified and as directed.
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.50 sqm and n. exc 4.00 sqm .
Taking down chowkats or frames n.exc 1.5 Sqm each (w/o taking off shutters from the frames ).
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F Mild steel, plain, black 1.6mm thick sheet in covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required
S&F Factory made MS tubular Box type window of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and , GI wire mesh,of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, etc cpmplete all as specified and as directed.
S&F of chimmey bars (straight or camber), bearing bar, tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc, and similar articls conforming tgo Fe-290 Gde E-165, complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in bed blocks, bed blocks of hold fasts, coping, PCC cill etc complete all as specified and as directed.
M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
S&F 100mm butt hinges, medium weight , cold rolled mild steel and fixed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls, complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plasteral surfaces and apply two coats of Oil emulsion distamper over a coat of wall putty, complete all as specified and as directed. By Engineer-in-Charge.
Preparation of old decorated surfaces of brick/concrete plastered /unplastered surfaces by brooming down or steel wire burshing scrapping down smoke soot moulds moulds and efflorescent salts and treating oil and greasy spots and applying two coat of oil emulsion distemper including one coat of wall care putty 1.5mm thick all as specified and directed
Preparation of old decorated surfaces of brick/concrete plastered /unplastered surfaces by brooming down or steel wire burshing scrapping down smoke soot moulds and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint
Taking down unserviceable aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed complete all as specified and directed.
M&L for point wiring for following types of electrical points with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through medium grade PVC conduit pipe not less than 20mm dia concecled in wall /surface in ceiling including provn of pressed steel terminal boxes of suitable size with 2.8 mm thik plastic laminated sheet cover for mounting switches, socketes and regulator along with continous earth wire of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (Note : Cost of cutting chasing and making good to disturbed surface to match with existing surface are deemed to be included in quoted rate).
One light/fan point controlled by one switch one way
One socket out let 5 Amps point controlled by one switch one way on same switch one way on same switch board complete all as specified and as directed.
One socket out let 5 Amps point controlled by one switch one way on independent switch board complete all as specifed and as directed.
All as a per item No 37 here in before but point wiring with 2.5 sqmm for socket out let 15 Amps point controlled by one switch.
Supply & Fix in replacement of switch piano flush type 5 Amps SP one way 240 volts complete all as specified and directed.
S&F for switch piano flush button single pole one way 15 Amps 240 volt complete all as specified and directed.
S&F for socket 5 Amps 5 pin flush type, 240 volts complete all as specified and as directed.
S&F for socket 15 Amps 6 pin flush type, 240 volts complete all as specified and as directed.
S&F ceiling rose three terminals/PVC/polycarbonate, isolated body on PVC board, Complete all as specified and as directed.
Supply & fix in replacement of steped type electronic fan regulator heavy duty flush type complete.
Supply and fixing in replacement of LED lights fitting 1 x 18, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completed overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
S&F in replacement lamp holder insulated body PVC/Polycabonate type with back plate suitable for batten/angular/pendent holder fittings, complete all as specified and as directed.
S& F in replacement bulk head luminaries, with 1x9 W/1x10W bulkhead luminiaries LED light driver holder etc Complete with all accessories and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.
S&F LED lamp 7/9 W suitable for lamp holder, complete all as specified and as directed.
Taking down fan, ceiling cable end, dismantling blades and removing fan blades and deposited to MES store complete all as specified and directed.
Painting of ceiling fans complete, which retreived from above item in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including hanging to existing place complete all as specified and directed.
Supply, laying, jointing and testing of XLPE insulated, armourd heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 16 sqmm 2 core laid in trenches, ducts, pipes including taking out old unserviceable cables all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10 Sqm for laying of cable and foundation of poles stays and getting out in soft/loose soil all as specified and directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specifed and directed by Engineer-in-Charge.
M & L for sand cushioning to underground cable, provided with a layere 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. Note : Punned thickness of sand shall be mesured.
Supply and laying brick covering with width equal to length of brick as mechanical protection to cable using sub class 'B' bricks laid flat, size 230mm x 115mm x 75mm, all as specified and as directed.
Supply and laying in GI tubing light grade of 40mm with necessary fittings as in cable proctection in trenches/fixed on wall/floor including necessary clmaps bolts and nuts complete all as specified and as directed by Engineer-in-Charge.
Supply & Fix in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK -09 protection double door complete with appropriate 200 Amps size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distribution wall surfaces to match with existing specification (Note- MCBs will be measured separately).
S&F Street light bracket made up of 40 mm bore light grade GI pipe 1.2 mtr long, Clamp, nut, bolt, Washerrs etc and including necessary bending welding etc complete all as specified and directed.
S&F LED building security light 25 Watt with pressure die-cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07 complete with connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 1.0 sqmm complete all as specified and as directed by Engr-in-Charge.
S&F in replacement MCB single pole 240 volt any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cable.
S&F in replacement MCB SPN 240 volt any rating from 40 amps, with rupturing capacity 10 KA including providing thimble for out going cable.
Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangment, funnel, wire mesh and earth work in hard/dense doil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR part-I connected to earth test point all as specified or indicated including testing on completion.
M/S. Choudhary Dewan Chand And Sons
M/S Narinder Pal Choudhary
RAJINDER CHOUDHARY
Ankit Sagar
NATIONAL TRADING COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .