CA NO. GE(I)(AF)/SHL/ OF 2022-23 REPAIR, POLISHING AND PAINTING OF WOODEN AND STEEL FURNITURE AT AF STN LAITKOR PEAK UNDER GE (I) AF SHILLONG

Amount

WOODEN FURNITURE Table 900mm x 900mm x 760mm : FD-291/FD-88 Removing of following old unserviceable parts fromTable and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Short rails

Long rails

Triangular brackets of size 100mm x 100mm x 50mm at junction of legs and rails as diected.

Removing of unserviceable/ broken top fromTable 900mm x 900mm x 760mm and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TABLE 900mm x 600mm x 760mm WITHOUT DRAWER : Drg No : FD-284/FD-223 Removing of following old unserviceable parts fromTable and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Long rails

Short rails

H type stiffener fabricated from wood of finished section size size 25x50mm as per drgs

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TABLE 900mm x 600mm x 760mm WITH DRAWER : Drg No : FD-283/FD-224 Removing of following old unserviceable parts from Table and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Long rails

Short rails

H type stiffener fabricated from wood of finished section size size 25x50mm as per drgs

Drawers including Knob complete

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TABLE DINNING 6 PERSON : Drg No: FD-273, FD-239 Removing of following old unserviceable parts from Table and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Long rails

Short rails

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TABLE WRITING : Drg No : FD-33, FD-249,FD-275 Removing of following old unserviceable parts fromTable and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints and applying two coats of french polish after preparation of previously untreated/existing treated/polished surfaces complete all as shown on drg.

Top long rails

Top side rails

Long stiffener

Short stiffener

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Removing of old unserviceable broken shutter from table writing and supply and fix new shutter fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked one side teak shade other side white in colour including 4 mm thick first class hard wood teak wood external beading/lipping around the shutter and fixing in position with contineous electro galvanised piano hinges with knob of 38 to 40mm dia plastic coated with machine screw all as shown on drg and as directed.

Removing of old unserviceable broken shelves from table writing and supply and fix new shelves fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked one side teak shade other side white in colour including 4 mm thick first class hard wood teak wood external beading/lipping and fixing in position all as shown on drg and as directed.

Removing old unserviceable drawer from side board and Supply and fix new drawer in position all as shown on drg and as directed.

Locks with new GI locks as per Drg.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TABLE CENTRE : Drg No: FD-235, FD-274) Removing of following old unserviceable parts from Table and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Short rails

Long rails

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

PEG TABLE : Drg No: FD-236, FD-277 Removing of following old unserviceable parts fromTable and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Long rails

Short rails

H type stiffner

Removing of unserviceable/ broken top fromTable and supply and fix new top of table fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

TEAPOY : Drg No: FD-34(M), FD-232, FD-278 Removing of following old unserviceable parts fromTeapoy and supply and fixing same parts made from seasoned first class hard wood (Teak) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol, pinning, screwing, nailing, wedging,including tightening of other joints complete all as shown on drg.

Long rails

Short rails

Removing of unserviceable/ broken top from Teapoy and supply and fix new top of teapoy fabricated from 18/19mm thick prelaminated particle board of BWR type exterior grade ISI marked inclunding 4 mm thick first class hard wood teak wood external beading/lipping around the top fixed with screws/nails all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of table after preperation of surfaces all as specified and shown on drawing or as directed.

BED PLYWOOD TOP : Drg No FD-245 & FD-247 Removing of following old unserviceable parts fromBed Plywood top and supply and fixing same parts made from species of wood (seasoned) described in Drgs finished with existing shape as per respective drawings and fixed including tightening of other joints complete all as shown on drg.

Long rail

Short rail

Removing of unserviceable/ broken outer face covering of Head Board and supply and fix outer face covering using 4mm thick teak faced plywood inclunding half round 4 mm thick first class hard wood teak wood external beading/lipping around the head board fixed with screws/nails all as shown on drg and as directed.

Removing of unserviceable/ broken inner face covering of Head Board and supply and fix inner face covering using 4mm thick teak faced plywood inclunding half round 4 mm thick first class hard wood teak wood external beading/lipping around the head board fixed with screws/nails all as shown on drg and as directed.

Removing of unserviceable/ broken outer face covering of Foot Board and supply and fix outer face covering using 4mm thick teak faced plywood inclunding half round 4 mm thick first class hard wood teak wood external beading/lipping around the head board fixed with screws/nails all as shown on drg and as directed.

Removing of unserviceable/ broken inner face covering of Foot Board and supply and fix inner face covering using 4mm thick teak faced plywood inclunding half round 4 mm thick first class hard wood teak wood external beading/lipping around the head board fixed with screws/nails all as shown on drg and as directed.

Taking out old unservicable ply top of bed and supply and fixing of new 12mm thick (7 ply) plywood, BWR grade, exterior grade ISI marked Ply wood of size of bed complete all as as specified, shown in drawing and directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of Bed after preperation of surfaces all as specified and shown on drawing or as directed.

CHAIR EASY : Drg No FD-229, FD-17(M) Removing of following old unserviceable parts from chair easy and supply and fixing same parts made from seasoned first class hard wood ( Teak wood) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol including tightening of other joints complete all as shown on drg.

Front Legs

Rear Legs

Hand rest

Side Rails

Rear rails of seat frame with holes for canning

Front rail of seat frame with holes for canning

Side Rail of back frame with holes for canning

Rear rail of back frame with holes for canning

Front Rail of back frame

Bottom rear rail (Stiffener)

Bottom front rail (Stiffener)

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of chair easy after preperation of surfaces all as specified and shown on drawing or as directed.

CHAIR WRITING : Drg No FD-280 Removing of following old unserviceable parts from chair wtiting, and supply and fixing same parts made from seasoned first class hard wood ( Teak wood) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol including tightening of other joints complete all as shown on drg.

Front Legs

Rear legs

Front rail with holes for canning

Side rail/Rear rail with holes for canning

Back Rest

Hand rest

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of chair writing after preperation of surfaces all as specified and shown on drawing or as directed.

CHAIR DINNING : Drg No: FD-279, DB-10092) Removing of following old unserviceable parts from chair dining, and supply and fixing same parts made from seasoned first class hard wood ( Teak wood) duly finished with existing shape as per respective drawings and fixed with bamboo pin and fevicol including tightening of other joints surfaces complete all as shown on drg.

Front Legs

Rear legs

Front rails with holes for canning.

Side rail with holes for canning.

Rear rail with holes for canning.

Back rest

Stiffener (side)

Stiffener (Centre)

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of chair dinning after preperation of surfaces all as specified and shown on drawing or as directed.

Recanning of seat and back of any type of chair, stool dressing and other similar type of items with new 2mm wide 0.4mm thick half round white plastic cane of superior quality closely woven in Godrej pattern with 3.5mm wide and 0.4mm thick side border and strengthening band as specified and shown in drawing.

TABLE DRESSING LADIES (Drg No: FD-251)

Removing of old Front leg from Table dressing, and supply and fixing same parts made from seasoned first class hard wood ( Teak wood) duly finished with existing shape as per respective drawings complete all as shown on drg.

Removing of old back ply from Table dressing, and supply and fixing same parts made from 6mm thick commercial ply wood as shown on drawing duly finished with existing shape complete all as directed.

Removing of old Mirror from Table dressing, and supply and fixing Mirror 5.5mm thick of size 366mm x 1220mm complete all as directed. (Make Swastik/Modiguard/Atul/Golden Fish)

Removing old unserviceable drawer from Table dressing and Supply and fix new drawer in position all as shown on drg and as directed.

Removing old unserviceable / broken knob from Table dressing and Supply and fix new knob of 38 to 40mm dia plastic coated with machine screw all as shown on drg and as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of chair dinning after preperation of surfaces all as specified and shown on drawing or as directed.

CHAIR DINING WITH CUSHION : Drg No: FD/E6/MAP/10

Removing of old unserviceable seat plywood from chair dining, and supply and fixing seat plywwod 12mm thick of shape and size complete all as specified and shown on drawing or as directed.

Removing of old unserviceable foam seat from chair dining, and supply and fixing 75mm thick 32 density foam seat covered with tapestry cloth of superior quality complete all as specified and shown on drawing or as directed.

Applying two coats of french polishing to the repaired (previously untreated)/existing treated/polished surfaces of chair dinning after preperation of surfaces all as specified and shown on drawing or as directed.

SOFA SET : Drg No : FD-18 Repair to sofa single seater with arms by replacing spings, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fiber, cotton cloth, wooden parts and tapstry cloth. (Cost of tapastry cloth shuld not be less that Rs. 450/- per meter and should be best quality). 12mm thick plain foam to be provided to seat and back and arms rest all as specified shown in drawings and directed.

SOFA SET : Drg No : FD-18 Repair to sofa single seater without arms by replacing spings, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fiber, cotton cloth, wooden parts and tapstry cloth. (Cost of tapastry cloth shuld not be less that Rs. 450/- per meter and should be best quality). 12mm thick plain foam to be provided to seat and back all as specified shown in drawings and directed.

SOFA SET : Drg No : FD-281 Replacement of old unserviceable cushion of size 21" x 22" 100mm thick 32 density plain foam covered with tapastry cloth of approved shade and texture of best quality of cost not be less than Rs. 450/- per meter all as specified shown in drawings and directed.. (Make of foam : Sleep well/Kurlon/any equivalent brand as approved)

SOFA SET :TP Repair to sofa, single seater with arms of different makes (Godrej/Zuari etc as directed by Engr-in-Charge) by replacing coir fibre, cotton, wooden/ PVC parts and tapastry cloth/rexine of best quality as approved by GE. Cost of tapastry cloth/rexine should not be less that Rs. 820/- per meter. 12 mm thick plain foam to be provided to seat and back and arms all as specified and directed.

SOFA SET : TP Repair to sofa, three seater with arms of different makes (Godrej/Zuari etc as directed by Engr-in-Charge) by replacing coir fibre cotton, wooden/ PVC parts and tapastry cloth/rexine of best quality as approved by GE. Cost of tapastry cloth/rexine should not be less that Rs. 820/- per meter. 12 mm thick plain foam to be provided to seat and back and arms all as specified and directed.

Repair to Almirah large steel and replacement of following components complete all as specified, shown on drg and as directed :- Drg No. FD-1031, 67(M)

Material & labour for replacement of worn out shelves fabricated/made out of MS sheet one mm thick of size as shown in drawing and fixing in position complete all as specified, shown on drawings and directed.

Fixing only existing loose/hanging shelves in position complete all as specified, shown on drawings and directed.

Material & labour for replacement of Mild steel chromium plated, screwed type, 150mm long handles complete with washers etc as approved by GE complete all as specified, shown on drawings and directed.

Material & labour for replacement of old unserviceable brass locks 6 lever with duplicate keys complete all as specified and directed. (sample shall be got approved by GE before incorporation in the work)

Material & labour for legs made out of 1mm thick MS sheet fabricated in channel base with ends covered complete all as specified, shown on drawings and directed.

Material & labour for replacement of worn out base made out of MS sheet 1mm thick of shape and size complete all as specified, shown on drawings and directed.

Removing old unserviceable hinges, remetalling disturbed surfaces (if required and s and smoothening the surface to match with existing and Material & labour for new MS hinges cold rolled 75mm long (as approved by GE) complete all as specified, shown on drawings and directed.

Material & labour for scrubbing all old painted surfaces, removing all dents as required, preparation old or new surfaces, applying evenly putty to achieve uniform surface and applying one coat of red oxide zinc chrome primer and two coats of spray painting using synthetic enamel paint 1st quality of colour as ordered complete all as specified, shown on drawings and directed.

Material & labour for replacement of locking system made out of MS round bar (locking rod) 10mm dia with brass bushes complete all as specified, shown on drawings and directed.

Repair to Almirah small steel and replacement of following components complete all as specified, shown on drg and as directed:- Drg No. FD-1032, 67(M)

Material & labour for replacement of worn out shelves fabricated/made out of MS sheet one mm thick of size as shown in drawing and fixing in position complete all as specified, shown on drawings and directed.

Fixing only existing loose/hanging shelves in position complete all as specified, shown on drawings and directed.

Material & labour for replacement of Mild steel chromium plated, screwed type, 150mm long handles complete with washers etc as approved by GE complete all as specified, shown on drawings and directed.

Material & labour for replacement of old unserviceable brass locks 6 lever with duplicate keys complete all as specified and directed. (sample shall be got approved by GE before incorporation in the work)

Material & labour for legs made out of 1mm thick MS sheet fabricated in channel base with ends covered complete all as specified, shown on drawings and directed.

Material & labour for replacement of worn out base made out of MS sheet 1mm thick of shape and size complete all as specified, shown on drawings and directed.

Removing old unserviceable hinges, remetalling disturbed surfaces (if required and s and smoothening the surface to match with existing and Material & labour for new MS hinges cold rolled 75mm long (as approved by GE) complete all as specified, shown on drawings and directed.

Material & labour for scrubbing all old painted surfaces, removing all dents as required, preparation old or new surfaces, applying evenly putty to achieve uniform surface and applying one coat of red oxide zinc chrome primer and two coats of spray painting using synthetic enamel paint 1st quality of colour as ordered complete all as specified, shown on drawings and directed.

Material & labour for replacement of locking system made out of MS round bar (locking rod) 10mm dia with brass bushes complete all as specified, shown on drawings and directed.

Repair to CHAIR VERANDAH and replacement of following components complete all as specified, shown on drg and as directed:- Drg No- FD- 256, FD-259, FD-359

Taking out old unserviceable Legs and Supply & Fix new legs made out of 20mm dia 1.6mm thickness MS conduit pipe/tube complete all as specified, shown on drawings and directed.

Taking out old unserviceable frame and Supply & Fix new frame made out of 20mm dia 1.6mm thickness MS Conduit pipe/tubecomplete all as specified, shown on drawings and directed.

Taking out old unserviceable stiffener and Supply & Fix new stiffener made out of 20mm dia mild steel conduit/tube complete all as specified, shown on drawings and directed.

Removing of old unserviceable Nylon Newar and re-weaving the chair with New Nylon Newar 50 to 55mm wide of 1st quality of colour as approved as per mat Pattern complete all as specified, shown on drawings and directed.

Material & labour for scrubbing all old painted surfaces, removing all dents as required, preparation of old or new surfaces, applying evenly putty to achieve uniform surface and applying one coat of red oxide zinc chrome primer and two coats of spray painting using synthetic enamel paint 1st quality of colour as ordered complete all as specified, shown on drawings and directed.

MAHINDER ELECTRICALS

M/S INSHA ELECTRICALS