Work of installing an electricity meter and replacing the damaged cable for the streetlights on the Outer Ring Road under Mysuru City Corporation limits, from Nanjangud Signal to Deve Gowda Circle and from Nanjangud Signal to Malegala Maramma Temple, for the purpose of load distribution of the streetlight system

Work of installing an electricity meter and replacing the damaged cable for the streetlights on the Outer Ring Road under Mysuru City Corporation limits, from Nanjangud Signal to Deve Gowda Circle and from Nanjangud Signal to Malegala Maramma Temple, for the purpose of load distribution of the streetlight system

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 65 A

Fabricating supplying and mounting MS box made out SWGsuitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capaci...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 5...

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

RCC Pole - 9 Mtr Long, 145 kg WL

3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral)

Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections

Pole clamp for HT/LT AB cable

LT 4 Pin Cross Arm - GI

LT AC 3 Phase 4 Wire Whole current, 10- 60 Amps Smart Energy Meter of Class 1.0 Accuracy with swappable modules with an option for swapping GPRS and RF communication system as per IS 16444 Part 1 with...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Optical Fibre Cable (OFC) and its Accessories.HDPE/PLB Pipe 40/33 mm

1.1kV LTUG XLPE Insulated Cables as per IS-7098 (Part-1) with following parameters & as per BESCOM Requirements: H2/H4 grade Aluminium Conductor having purity of 99.7% Conductor Resistivity of 0.02826...

Labour Charges For RCC Pole - 9 Mtr Long, 145 kg WL

Labour charges for 1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm

Labour charges for Pole clamp for HT/LT AB cable

Fixing of 4 Pin cross arm with Insulator and Braces fixing

LT Cable Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm