MAINT OF JOINERY WORK, CULVERT, SIDE DRAIN OF DISPERSAL AND OTHER CONNECTED WORKS IN TECHNICAL AREA AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10

M&L for complete removal and cleaning of Construction/Contraction (Dummy) joints of width 08-12 mm & depth 25 mm by cutting and using mechanical equipment to remove loose dust, dirt or grease & repair to joints by applying suitable primer, inserting the backup rod of dia 12 mm, fixing masking tape of neoprine & sealing the joints with Polyurethane sealent to match with the existing colour and surface to give neat finish properly to obtain an even and smoth surface complete, including removal the unserviceable materials from site to outside MOD land complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal and cleaning of Expansion joints of width 25-30 mm & depth 50 mm by cutting and using mechanical equipment to remove loose dust, dirt or grease & repair to joints by applying suitable primer, inserting the backup rod of dia 30 mm, fixing masking tape of neoprine & sealing the joint with Polyurethane sealent to match with the existing colour and surface to give neat finish properly to obtain an even and smoth surface complete, including removal the unserviceable materials from site to outside MOD land complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of the existing/old painted surfaces duly cleaned/ removal by air comprssor and scraping thoroughly with broom or iron brush, including removal of dirt, dust, oil, greases etc. before application of the paint complete all as specified and as directed by Engineer-in-Charge.

M&L for one coat of reflective road marking paint of superior make with ready mixed Berger or equivalent guide line RM 164 paint road marking conforming to IS: 164 with a DFT of 100 micorns on Concrete / bituminus surfaces by using air less spray machine. The colour of paint shall be white / yellow / black / red / orange or any colour required at site by user on Taxiway/ Dispersal, marking exceeding 10 cm width or girth as per recommended dimensions and line shall be straight to give taxi guidance to the air craft. The paint specification of the machine shall be as under:- Graco line lazer 3900 with 2 guns and the maximum GPM (LPM): 1.60(6.0) , PSI (Bar) :3300(227), Engine cc (HP) :120cc and maximum tip size :0.029 specification as per directed by Engr-In-Charge. Note - (a) Work shall be carried out by the applicator of manufacturers representative of company approved by the GE. (b) Contractor shall produce purchase vouchers of full quantity consumed.

M&L for preparation of existing/old painted surfaces duly cleaned and removing by air comprssor and scraping thoroughly with broom or iron brush, including remove to dirt, dust, oil, greases etc.before application of the paint complete all as specified and as directed by Engineer-in-Charge.

M&L for one coat of Reflective road marking paint of superior make with ready mixed Berger or equivalent guide line RM 164 paint road marking confirming to IS: 164 with a DFT of 100 micorns on concrete/bituminous surfaces by using manual or air less spray machine. Colour of paint shall be white / yellow / black / red / orange or any colour required at site by user on Taxiway/ Dispersal marking not exceeding 10cm width or girth as per recommended dimentions and line shall be straight to give taxi guidance to the air craft complete all as specified and as directed by Engineer-in-Charge.

M&L for providing and laying self leveling elasto-meric concrete in any depth and any width as required for repair to cracks, corner spawling, pot holes, damaged edges of construction/dummy/expansion joints of cement concrete pavement/ slabs of Runway/ Taxi-track as required and finishing by means of trowels and flats alongwith application of a coat of special primer for elastomeric concrete after preparation of surface by removal of all loose material by disc cutter or by chiselling and cleaning by using air blower including all consumable materials, tools, labour etc including removal of all the spoils/ loose materials from site to outside MoD land complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs, SFRC drain cover any size, 75mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor will provide manufacturer test certificate of SFRC cover .

De-silting including cleaning of grasses, vegetation growth etc including area drainage of any description from drain of size n exc 1mtr width at top and depth n exc 0.4mtr including removal of bebris from site to outside MoD land complete all as specified and as directed.

M&L for PQC/RCC core cutting of 152mm dia and depth upto 200mm for mooring points and providing 20mm mild steel U shape bar including installation, drilling, grouting/filling with use of material RE-500V4 HILTI including tool use with core cutting drill 25mm and 16mm machine to be use for the cutting of PQC/RCC to furnish the cutting pieces, dismantling with HILTI Machine and removing excavated material from the site to outside MoD land complete all as specified and as directed by Engr- in- Charge.