REPAIR TO RETAINING WALLS, DRAINS, PATHWAYS, HARDSTANDING, FENCING GATE, MISC REPAIR AND REPAIRS TO BRICK WORK, PLASTERING, TILING, WALL PANELLING, FALSE CEILING, ROOF COVERING AND OTHER MISC REPAIR AT VARIOUS LOCATIONS UNDER AGE (I) BHALRA

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles ccomplete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6m in radius built in CM 1:6 complete all as specified and directed.

Taking down old cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4 surface finished even and smooth (without using extra cement) complete all as specified and directed.

M&L applying two coats of cement based paint incl preparation of new plastered surface complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm thick wall care putty over a coat of alkali resistance primer complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters form the frames) n.exc 1.5 Sqm complete all as specified.

"-Ditto-" as per above but exceeding 1.5 Sqm n.exc 4 Sqm each.

Taking down shutters exceeding 1 Sqm but not exc 2 Sqm each.

M&L for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc complete of frame size 125x60mm including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc complete of frame size 105x60mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawings.

M&L cement concrete (1:3:6) type C0 using 12.5mm grade stone aggregate filling in pressed steel chowkats, bed block for holdfast and the like all as specified.

M&L for factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood, glazed and skelton shutter 35mm thick open rebated and prepared to receive glass, gauge, etc (without sash bars), edges of framing pallin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc sizes of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkats, all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

S&F in repairs 100mm butt hinges, heavy weight, cold rolled mild steel.

S&F in repairs Aluminium anodized, barrel tower bolt of extruded section, 150mm long.

S&F in repairs aluminium handle, cast type, anodized 150mm size.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed.

S&F of 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F box type steel windows/ventilator (factory made) outer frame made out ERW tube 'P' section 65x45x25mm and shutter of ERW tube 'P' section 50mmx35mmx20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handge 100mm long mild steel tower bolt 02 Nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable fixing cooler/AC window complete all as specified and shown on drgs No CEPZ TD-324/07 Sheet 1/3 to 3/3. Note : The quoted rate shall also include :- (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks/concrete surface. (ii) 4 Nos MS steel lungs made of 20x5mm Iron flat 200mm long. (iii) 10mm Sq bar grill/guard bar design as per drawing. (iv) PCC block for embedding lugs complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square not exceeing 0.50 Sqm in each pane complete all as specified.

Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with putty or fixed with wooden beads complete all as specified.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and minimum thickness of powders coating 50 micron complete all as specified.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screw etc complete all as specified.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No), suitable handle ( 1 No), complete all as specified.

S&F 5.50mm thick sheet glass fixing for aluminium doors and window including 25 micron reflective type sun control film complete all as specifed and directed.

S&F in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg (aluminium die cast body) complete all as specified.

Dismantling CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise specially provided for complete all as specified and as directed.

S&F for structural steel works of Fe 410W (Gde E 250) quality A, as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication as directed.

S&F 0.5mm pre-painted galvalume aluminium zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self taping screws as specified.

S&F 0.5mm pre-painted galvalume aluminium zinc coating steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self taping screws as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with grade of zinc coating of 275 gms/ square metre with two corrugation side lap and at least 150mm end lap, fixed with 'L' type of 'J' type of cranked hook bolts, in roof, walls etc complete all as specified.

S&F 0.80mm thick plain, galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120 gms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashing, fixed with coach screws and washers complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified.

M&L for non asbestos fibre cement building boards 6mm thickness fixed or laid/inserted to timber/GI/aluminium frame work with screws complete all as specified.

S&F anodised aluminium snap grid frame work for false ceiling and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

S&F in repairs PVC panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness, interlocking pattern of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions complete all as specified and as directed.

M&L 6mm thick plywood grade BWR, type BB, fixed as in wall/ceiling, flat or sloping fixed with nails all as specified.

M&L 12mm pre-laminated partical board interior grade prelaminated one side with decorative lamination and other side white lamination fixed with screw or nails complete all as specified.

S&F in repair stainless steel drapery rods of 25mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and incl MS bracket size 150mm made to shape or 75mm dia MS end wall to wall round block made to shape in male and female pieces as required at site complete all as specified.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured non skid ceramic tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc and jointed in neat cement slurry and pointed in coloured cement to match shade, pattern, laying etc of tiles, over and including 15mm thick screed bed or bedding layers of cement mortar 1:6 as directed at site.

M&L glazed ceramic coloured tiles, (premier quality) of size 450x350x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 all as specified & directed. Note : Design, shape and pattern of fixing of tiles shall be as directed by Engr-in-charge.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) light shade polished, area of each tiles n exc 0.36 Sqm in floors etc set and jointed in neat cement slurry over 15mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of debries outside cantt area complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid 20mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and roughening the existing surface complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in riser over cement screed base laid 20mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and roughening the existing surface complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like laid over 20mm thick in cement mortar (1:4) including roughening the existing surface and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified.

Dismantling water tanks and removing to store of capacity exc 250 but not exc 500 litres, all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 but not exc 1000 litres, all as specified and directed.

Rotational moulded polyethelene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part-I, capacity of water tank 1000 Ltr.

All as per above but 500 litres capacity.

Disconnecting existing tanks exc 250 & n exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks exc 500 & n.exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore of pipe all as specified and as directed.

S&F or tubes, Medium grade, galvanised, with all fittings and fixed in short lengths complete to walls and ceilings or laid in floor, 15mm bore of pipe all as specified and as directed.

Description all as per item as above but fixing only(15mm bore of pipe) all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm bore of pipe all as specified and as directed.

S&F or tubes, Medium grade, galvanised, with all fittings and fixed in short lengths complete to walls and ceilings or laid in floor, 20mm bore of pipe all as specified and as directed.

Description all as per item as above but fixing only (20mm bore of pipe) all as specified and as directed.

S&F in repair 15mm bore bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repair 15mm bore stop/angle valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repair 20mmm bore stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe all as specified and as directed.

S&F for PVC connections 15mm size with PTMT nuts of length 600mm all as specified and as directed.

S&F PVC waste pipe 32mm bore complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and as directed.

S&F in repairs Viterios china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and as directed.

S&F in repairs Viterious china squatting pan of pattern 'Orissa pattern' size 580x440 mm white with integral foot rests, flush pipe including provn of cement concrete beddig and making good the dismantled surface in PCC 1:2:4 type B-I using 20mm graded stone aggregate all as specified and as directed.

S&F vitreous china bowl urinal flat back, size of 465x355x265mm white including waste pipe 32mm dia GI pipe, grating and brass union for discharge pipe complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement etc complete all as specified and directed by Engr-in-Charge.

S&F as in repair tubular towel rail, aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified.

S&F as in repair grating doom 125mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

S&F as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repair chromium plated shower roses 125mm long with arm swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm including bracket, (pedestal pattern) cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.

S&F in repair plastic water closet seat cover, white/black, closed pattern with flats bottom and cover and mild steel chromium plated or aluminium hinging device of approved make and quality etc complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F hand shower (health faucet) (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore, minimum weight 210 gms complete all as specified.

S&F in repairs 15mm dia bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

M&L for walling of random rubble stone with dressed face masonry uncoursed well bounded bedded and solidly hearted built in CM 1:6 brought upto course complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No 87 above but except stone.

M&L for pre-cast cement concrete 1:3:6 type C-1 using (20mm graded stone aggregate) as in bond stone set in cement mortar 1:6 including necessary form work and finished exposed surface.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping, kneelers, perapets, apex stones and similar works including necessary form work complete all as specified and directed by Engr-in-Charge.

S&F of PVC (SWR) pipes 110mm single socketed in any length, fixed in retaining wall for weep holes and complete all as specified and directed by Engr-in-Charge.

M&L for raised pointing in CM 1:4 including raking out joints/poiting to random rubble or polygonal rubble uncoursed or brought up to course work built in cement mortar complete all as specified.

M&L for broken stone or boulder of gauge exc 80 to 150mm, dry, hand packed tightly as in back filling of retaining wall complete.

M&L for broken stone or boulder of gauge exc 80 to 150mm, dry, hand padded tightly as in back filling of retaining wall (EXCEPT STONE/BOULDER) complete.

Demolition of cement mortar concrete (un-reinforced) any description and in any position not other wise.

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in surface channels and drain etc including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings exc 15cm thickness (below or above ground level).

M&L 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) sub base of flooring complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), 75mm thick as in hard standing without using extra cement complete all as specified and directed by Engr-in-Charge.

Forming contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade 'A'.

Dismantling of stone slabs and tiles laid dry of laid dry and pointing of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-charge.

M&L for 80mm thick machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of M-40 Grade with grey cement and pigments complete all as specified and as directed.

M&L for 25mm thick sand cushioning layer under interlocking paver block complete all as specified and as directed.

Material and labour for factory made precast (rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20cm x20cm x25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed.

Dismantling posts or struts embedded in concrete, brick work, masonry, etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel screw bolts (machine made) dia of neck in11 to 15mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5cm but n.exc 10cm long complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth applying two coat of synthetic enamel paint and over a coat of red oxide primer complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spiraly for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of fencing wire mess (chain link fencing) any type of size complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Dismantling of galvanised barbed wire of any description and in any position complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed.

SHARMA TRADERS (BID ID -3459294)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3459059)

M/S MAHALUXMI BUILDERS (BID ID -3465028)

VEER TRADERS (BID ID -3457992)

M/S MAQBOOL AHMED BHAT (BID ID -3456301)

M/S KOTWAL CONSTRUCTIONS (BID ID -3459509)

SINGH CONST CO (BID ID -3459150)