Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC UNIT NO 7 MOUNT VIEW CO OP HOUSING SOCIETY LIMITED MUMBAI MANKHURD 400 088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹18.2 L+₹69,921 (4.00%)Rejected-AOC MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹19.0 L+₹1.5 L (8.58%)Rejected-AOC TULSI ASTHA FLAT NO 1 PLOT NO 54 SECTOR 12 VASHI NAVI MUMBAI THANE 400 703 | THANE | MAHARASHTRA | 400703 | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹20.9 L+₹3.4 L (19.5%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST |
Tender Value
₹21 L
EMD Value
₹42,000
Closing Date
14 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) MANKHURD
GE (NW) MANKHURD
ADDITION/ ALTERATION TO BLDG NO P-160 (NAVAL KG SCHOOL) AT TS MAHUL UNDER GE (NW) MANKHURD
2023_MES_582234_1
8220/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) MANKHURD
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE (NW) MANKHURD
₹42,000
Yes
3 Apr 2023
22 Feb 2023
16 Mar 2023
22 Feb 2023
14 Mar 2023
1 Mar 2023
Amount
Surface dressing not exc. 15cm deep in soft / loose soil
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting ou in hard/dense soil complete all as speicified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out in soft/loose soil for laying of cable etc complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm hard/dense soil.
Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick complete
Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point
M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.
M&L Cement concrete in foundations filling and mass concrete type D-2 1:4:8 ( 40 mm graded aggregates )
M&L 75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )
M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder:
M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 75 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar
M&L for RCC M 30 (Design mix) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns,etc.; basement slabs,under-reamed piles and mass concrete
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and matt beams sides and soffits (if any) of foundation and plinth beams; and similar work ; vertical or to batter ,flat
M&L for RCC M30 (Design mix) in columns, pillars, plers.posts and struts
Use and waste forrnwork to sides of pillars. posts. struts. piers. columns and stan- rchions for fair finished surfaces of concrete,square,
M&L for RCC M30 (Design mix) in beams, cantilevers, bressurnmers lintels over 1.5m span
Use and waste formwork to sides and soffits of floor or roof beam. beam hauchings. girders. bressum-mers.· lintels. cantilevers. shelves including supports. overhangs. etc. also splays between floors and beams. etc.. for flat
M&L for RCC M 30 (Design mix) in chajjas
Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges for flat
M&L for RCC M30 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat
S&F Fe 500D bars CRS TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to
Ditto as item No 22 above but 5 mm over upto and including 10 mm dia in stirrups, spacers and binders.to 8 mm dia , qualtiy conforming to
M&L for Pre cast cement concrete block masonry with solid block of grade(C-5) having block density not less than 1800 Kg/cum, exc, 10cm in width and setting in CM 1: 6, complete all as specified and directed.
M&L for 10 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.
M&L for 15 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.
M&L for 5 mm thick polymer modified ready mix cement based plaster on the ceiling surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.
M&L for leakage / seepage proof coating consisting of preparing the new surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions, as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.
M&L for 3 mm thick (minimum) white cement based wall care putty in two coats on new or old surfaces of walls/ceilings etc, finished even and smooth, complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.
S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, partitions, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface. Make: Rajashree or equivalent.
M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2004 complete as as specified. Make : Rajashree or equivalent.
S&F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good the disturbed surfaces of walls complete all as specified.
S&F 2nd class hard wood 35mm thick, plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkats complete.
S&F 2nd class hardwood 35mm thick glazed and skeleton shutters open and prepared to receive glass, gauze etc (with sash bars) edges of plain, chamfered or rounded, fitted with cut and mitred beads for securing gauzes etc, sizes of members of sizes of shutters as specified in SSR part -I sec 8,clause 8.24(a).
M&L for preparation of new or previously untreated wood based surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as directed.
S&F MS hold fasts and similar small articles complete all as specified.
S&F aluminium anodised sliding door bolts with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, length of bolt 250 mm long complete all as specified and directed.
S & F stainless steel butt hinges with extruded aluminium alloy with galvanised mild steel hinges pins 100mm size tyupe C-21.
S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm length.
S/F aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm
S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
Supply and fixing 4 mm thick plain sheet glass, ordinary quality with and including provision of new rubber gasket after hacking out old broken glass (any size, quality or description) for existing aluminium joinery, complete all as specified and directed.
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, complete all as specified and directed.
M&L for coloured 450x300x6mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the colour of tiles, over and including 10mm thick cement mortar backing coat in CM 1:4, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the colour of tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick, (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed.
M&L for 20 to 25 mm thick machine cut pre-polished cuddappa stone Slabs (table rubbed and polished) as in cills, jambs, soffits, cooking platform etc, pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc, including moulding/rounding to edges of the slab and also including provision of 15mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F in repairs, white, vitreous China, wash down water closet pan (pedestal pattern), Ist quality, inlcuding plastic water closet seat white, closed pattern with flat bottom and cover and Mild Steel CP or aluminised hinging device, complete all as specified and directed. Note: Flushing cistern, flush pipe will be measured and paid for separately.
M&L health faucet of 15 mm dia with 1 m tube hook , Cat No 187 of Prayag or equivalent make as approved by the GE complete all as speicified
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene of low or high density or PVC, 32mm dia, complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.
S&F two way Bib cock of make Cat No SQT-512 ANKN or of ESSCO or equivalent of Marko ,Parko as approved by the GE complete all as specified and directed.
S&F in repairs Vitreous China white, 1st quality, wash hand basin, flat back, size 550mm x 400mm including mild steel angle brackets,CP brass fittings, waste, union, 32mm dia PVC waste pipe, cutting for and pinning ends of brackets, complete all as specified and directed .
M&L 40 mm dia Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm all as specified and directed.
S&F 15mm bore brass CP pillar tap, Make ESSCO Cat No MQT-507 or equivalent of make Parko as approved by the GE, complete all as specified and directed.
S&F 15mm bore brass CP Stop Valve, Make ESSCO Cat No MQT-513 A or equivalent of make Parko/ ZOLOTO as approved by the GE, complete all as specified and directed.
S&F 15mm bore brass CP Bib Tap, Make ESSCO Cat No MQT-511 or equivalent of make parko as approved by the GE, complete all as specified and directed.
S&F in Grating doom 125 mm dia with waste hole of PTMT (Minimum Weight 25 gram), complete all as specified and directed.
Supply & fixing 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Supply & fixing 15 mm CPVC pipes UV stable,leak proof, tough ,rigid , conforming to IS:15778 of SDR 11 standard., medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S & F of 75 mm bore uPVC (SWR) soil, waste, ventilating rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.
S & F 110 mm bore uPVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.
S&F 75 mm bore uPVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.
S&F 110 mm bore uPVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.
S&F cast iron Nahani trap with 75mm dia out let including grating, connecting, jointing to waste pipe with lead joints, also including embedding the same in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) mixed with water proofing compound in the proportion as recommanded by the manufacturer(s), taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces, complete all as specified and as directed .
M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) for filling in sunken portion, as per requirement, complete all as specified and directed.
M&L for PCC 1:2:4, type -B-1, using 20mm graded stone aggregated as in sub base of sunkun floor mixed with WPC in the proportion as recommanded by the manufacturer(s), complete all as specified and directed, (Note : WPC will be measured and paid separately as supply only).
Material and labour for rendering 15 mm thick rendering in CM 1:4 mixed with WPC in the proportion as recommanded by the manufacturer(s), over top of sunken floor, roof surfaces etc, finished even and fair, complete all as specified and as directed Note: WPC shall be measured and paid as "supply only" separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm including cleaning the surfaces over newly plastered surfaces of sunken portion, complete all as specified and directed.
Supply only intergal water proofing compound, complete all as specified and directed.
S&F 20 mm dia brass chromium plated tubular towel rail 'D' type 600 mm long between flanges, complete all as specified and directed.
M&LScreed bed or bedding layer or mortar 10mm thick for laying floor finishes in CM 1:4
M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.
M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane surfaces, complete all as specified and directed.
Supplying and fixing rotational moulded polythylene water storage tanks, double layered (ISI marked) of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including provision of necessary fittings for connecting the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F in repairs gunmetal gate valve, ISI marked with iron wheel head, screwed at both ends for iron pipe or ferrule of 25mm bore and provision of necessary fittings like unions, check nuts, etc, complete all as specified and as directed.
M&L for coloured Parking tiles, heavy duty of size 300x300x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed. Make : JOHNSAN /SOMANI/ORIENT BELL/KAJARIA.
M&L for Salt Glazed, Stoneware, Drain pipes of 150mm bore, grade 'A', laid in trenches and jointed, complete all as specified and directed, Note: Excavation & earth work and PCC for bedding & haunching shall be measured and paid for separately.
M&L for 100mm thick concrete bed in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) for 150mm bore pipes including packing under and haunching against the sides of pipes after they are laid and tested etc, complete all as specified and directed.
M & L for point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated HR-FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including casing caping (minimum 20mm width) etc with all accessories, fittings, PVC junction boxes etc, sunk pressed steel boxes not less than 1.6 mm thick, 50 mm deep terminal boxes covered with 3mm thick plastic laminated sheet top cover fastended with chromium plated brass screws, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed.
-ditto- all as per item No. 85 above but for One 2pin/3 pin socket outlet 5 Amps on same board complete all as specified and directed.
-ditto- all as per item No. 85 above but for One 2pin/3 pin socket outlet 5 Amps on independent board complete all as specified and directed.
M&L for point wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, HR-FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn in and including casing caping (minimum 25mm width) with all accessories, fittings, PVC junction boxes etc, sunk pressed steel terminal boxes not less than 1.6 mm thick, 50 mm deep, covered with 3 mm thick plastic laminated sheet top cover fastened with chromium plated brass screws, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth dolly for 15 Amps, 3 Pin, socket outlet independent, complete all as specified and directed.
S&F Switch Piano 5 Amps, 230 Volts, one way, flush type, ISI marked, conforming to IS-3854 complete all as specified and directed.
S&F Switch Socket combination 2 in 1 , 5 Amps, flush type, 5 Pin, 230 Volts, ISI marked, conforming to IS-3854 complete all as specified and directed.
S&F Switch Socket combination 2 in 1 , 5/15 Amps, flush type, 6 Pin, ISI marked, conforming to IS-3854 complete all as specified and directed.
S&F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, conforming to ISI duly marked complete all as specified and directed.
S&F fan regulator, electronic stepped (5 step), 230 volts, 100 watt, flush type and connecting-up,ISI marked complete all as specified and directed.
S & F 20-22 W capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6000K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, CRI> 80, lamp burning hours not less than 50000, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make : BAJAJ/JAQUAR/WIPRO
S & F 10 W capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6000K, independent isolated SMPS based constant current electronic LED driver with THD < 20%,CRI> 80, lamp burning hours not less than 50000, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : BAJAJ/ JAQUAR/ WIPRO Note-:(i) LM-80 test certificate shall be produced alongwith LED fittings. (ii) Three years written warranty certificate for the fixtures from OEM shall be provided alonwith fixture.
S & F MCB DB, 12 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, complete all as specified and directed. Note: Quoted rate shall also be deemed to include for provision of copper bus bar of 200 Amps rating.
S & F MCB, SP, 05 to 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, conforming to IS dully marked complete all as specified and directed.
S & F MCB, SPN, 40 Amps, 240 Volts, 10 KA Breaking capacity, C-series, conforming to IS dully marked complete all as specified and directed.
Supply and fixing energy efficient BEE three star rated high speed ceiling fan, 1200mm sweep, speed 385 RPM, air delivery 200 CMM, power 70W (approx) comprising of double ball bearing three blade type, PVC conopy- 02 Nos, complete aluminium body and connecting up including provision of three core flexible PVC insulated copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect all as specified and directed. Make -:Orient/ Bajaj/Crompton. Note -: The Contractor shall submit 2 years warranty certificate from OEM of ceiling fan.
Supply & fix Heavy Duty metallic Exhaust fan high speed type of sweep 300 mm, speed 1400 RPM, air delivery 1300CMH, power 70W (approx) comprising of double ball bearing, blades,louvers complete mounting anchor fasteners, aluminium louvers made of aluminium sheet of 0.5 mm thickness, provision of three core 1.5 Sqmm PVC insulated copper cable from ceiling rose to fan etc complete all as specified and directed. Make-:Crompton/ Orient/ Almonard/ Bajaj Note -: The Contractor shall submit 1 years warranty certificate from OEM of exhaust fan.
M & L for earthing complete with galvanised steel earth plate electrode size 60cm x 60cmx 6mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth lead 4mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion.
M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge
Supply and fixing LED street light fitting 30-35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing along with prismatic polycarbonate optic with IP66 ingress protection having 4 kv in built surge protection with top opening driver cover for easy maintenance, efficacy not less than or equal to 100lm/W, CCT 5700K complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including MS clamps,bolts, nuts, washers, anchor fastners etc suitable for fixing security light of Cat No -: ENXT P 35L WH PO PC SD of Bajaj or equivalent from philips/Jaguar/ wipro/ CG, complete all as specifed and as directed.
Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.Including cable lugs of suitable size complete all as specified and directed. Make : GLOSTER/ RPG ASIAN/ HAVELLS/ KEI
S& F of HDPE pipe 50 mm dia for laying in ground, road crossing etc for cable protection including necessary fittings , clamps for supports, etc all as directed by Engineer in charge
M & L for cutting of existing GI pipe of size 50mm dia and inserting GI tee/bend of size 50 x 50 x 25mm including necessay excavation and earth work all required new GI fittings as per site requirement complete with testing,all as specified and directed by Engineer- in- charge.
M & L for Cutting of existing GI pipe upto size 25 mm dia and inserting GI tee/bend including all required new fittings complete with testing,all as specified and directed by engineer- in- charge.
Supply, lay/fix, connect and testing steel water tubing of 25 mm bore, medium grade, conforming to IS 1239 part I 2004, duly marked, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures,Clamps and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed.Make -: Jindal/ Tata/ BST.
Super Construction
sahajanand const co.
AM ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .