Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹3.2 LAccepted-AOC MASJID KE PAAS WARD NO 17 MOHAN COLLIERY AMBADA POST AMBADA DISTRICT CHHINDWARA M P | AMBADA | CHHINDWARA | MADHYA PRADESH | 480449 | L-1 | Accepted-AOC Successful Bidder | |
| 2 | L-2₹4.3 L+₹10,355.68 (2.48%)Rejected-Finance CHHINDWARA MADHYA PRADESH | CHHINDWARA | CHHINDWARA | MADHYA PRADESH | 480553 | L-2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L-3₹4.4 L+₹18,568.48 (4.44%)Rejected-Finance KARMA COLONY MINERS GUDI POST PALACHOURI DISTRICT CHHINDWARA M P | DUNGARIYA | CHHINDWARA | MADHYA PRADESH | 480553 | L-3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L-4₹4.4 L+₹22,334.57 (5.34%)Rejected-Finance AMBADA 14 POST AMBADA DISTRICT CHHINDWARA M P | AMBADA | CHHINDWARA | MADHYA PRADESH | L-4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L-5₹4.8 L+₹58,614.73 (14.0%)Rejected-Finance DATLA JUNNARDEO TEHSIL CHHINDWARA DISTRICT MADHYA PRADESH | L-5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹7.2 L
EMD Value
₹9,000
Closing Date
27 Sept 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil) KA
Office of the Area General Manager, Dungariya, Kanhan Area
Construction of rooms for TB-1 switch room and Pit Sub Station at Sharda UG Mine under Ambara Sub Area.
2023_WCL_288865_3
ka3450-civ-s-e012 of 2023-24
Open Tender
Civil Works - Others
Item Rate
90 days
Sharda U G Mine
----N.A.----
3 documents required · 3 mandatory
₹9,000
24 Nov 2023
15 Sept 2023
29 Sept 2023
16 Sept 2023
27 Sept 2023
16 Sept 2023
16 Sept 2023 - 22 Sept 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in foundation plinth level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer all complete
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved byEngineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
6 mm cement plaster of mix : (1 cement : 3 fine sand)
White washing with lime to give an even shade :New work (three or more coats)
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and accessplatform
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
Providing and fixing 1 mm thick MS sheet door with door frame of 35 x 35 x 5 mm angle iron and door shutter frame of 25x25x5mm, 20x4 mm MS flat at the back side of door shutter at sides, junctions, corners and as diagonal braces, 20x20x3mm angle iron at back side of door as middle piece and 25x5mm flat at front side in middle portion, all necessary fittings complete, including applying a priming coat of approved steel primer.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of Tiron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
Total impact of GST for the purpose of CTC
MOHAMMAD IMRAN SIDDIQUE
RAJPOOT CONSTRUCTION
Nasiruddin
firoj ansari
satish sharma
RAVI SINGH VERMA CONTRACTOR
B AND B GROUP
ASIM CONSTRUCTION COMPANY
MANOJ SINGH
stage.html
html • 0.07 MB
techsummary_299198.pdf
PDF • 0.20 MB
finsummary_299198.pdf
PDF • 0.18 MB
AL-e-012-03-23-24.pdf
PDF • 0.18 MB
finance_299198.pdf
PDF • 0.20 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .