Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹49.9 L+₹1.3 L (2.75%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹50.5 L+₹2.0 L (4.04%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | Rejected-Technical PLOT NO 330 REHARI COLONY JAMMU JAMMU JAMMU JAMMU KASHMIR 180005 | JAMMU | JAMMU AND KASHMIR | 180005 | - | Rejected-Technical UNENLISTED CONTRACTOR NOT MEETING ENLISTMENT CRETERIA IN MES | |
| 5 | Rejected-Technical | - | Rejected-Technical REJECTED BEING NOT ENLISTED IN APPROPRIATE CATEGORY |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
CERTAIN BR AND EM MAINTEANCE WORKS UNDER AOR AGE REASI UNDER GE NAGROTA
2024_MES_662710_1
CA NO GEN-40/2024-2025
Open Tender
Civil Works - Others
Item Rate
270 days
NAGROTA
Class D Category b i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹99,800
Yes
12 Nov 2024
28 Jun 2024
6 Sept 2024
28 Jun 2024
3 Sept 2024
13 Jul 2024
Amount
SCHEDULE ‘A’ PART-I Cleaning of sewage lines which are blocked /filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line / manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 150mm internal dia of pipe complete all as specified and directed.
Cleaning of sewage lines which are blocked /filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line / manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 100mm internal dia of pipe complete all as specified and directed.
Cleaning of septic tanks, soakage well of any capacity and manholes by Desludging / dewatering including inlet/ outlet chambers, removing out all scum, silt, residuals sludge (both organic and inorganic nature) after plugging the incoming sewage lines through combined high pressure water jetting cum suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the same in the tank to a place outside cantonment at the place meant for the purpose by local municipality, all as directed by Engineer-in-Charge
Cleaning of blockage of any type of wc (Indian/pedestal) from WC pan to Ist manhole in single storied bldg including resetting/ refitting of asccess door in soil pipe where opened without causing any damage to the wc pan 'P' or 'S' trap and pipe including fitting complete all as speciffied
Cleaning of blockage of any type in Nahani trap provided in bath room, kitchen and indoor waste water pipe of kitchen sinks and WHB and removing all the sludge and foreign material from the trap and waste pipe from blocked trap to gully trap/ surface drain wherever opened or without causing any damage to the trap and pipe complete all as speciffied
Taking up or down steel tubing and connection for 15mm tubing incl cleaning for refixing or removal. complete all as specified and directed.
S& F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
Taking up or down steel tubing and connection for 20 mm tubing incl cleaning for refixing or removal. complete all as specified and directed.
Supply & Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. complete all as specified and directed.
Cleaning of service PVC service/over head tank cleaning process as under (a) Dewatering using submerssible pump/bailing out of water to dispose the minimum level of dirty water from the tank. (b) Cleaning the tank/ UG sump bottom, walls and ceiling using high pressure water jet to dislodge the algae calcinations, dirt etc. (c) Disposing the dirt water sludge etc., using specially designed sludge removal pump. (d) Cleaning the tank inside throughly by using industrial grade vaccum pump to make the tank inside free from dirt, algea and sludge etc. (e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as hydrogenperoxide (bio degradable) for disinfection of tank inside. (f) Total disinfection and sterlisation of tank hyginecally cleaned and bacteria free and safeby Eco-Friendly for storage of water. Note :- Qty of tank are consider for cleaning twice in a Year and Date of cleaning to be written over head tank after cleaning.
(a) For exc 250 ltrs and not exc 500 ltrs capacity
(b) For exc 501 ltrs and not exc 1000 ltrs capacity
(c) For exc 1001 lt and not exc 2000 lt capacty
(d) For exc 2001 lt and not exc 5000 lt capacty
S & F Rotational moulded polyethylene water 500 ltr Capacity storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mmdia . (Minimum weight 2 0 m m - 2 1 0 g m s).Including taking down existing water tank and float valve.
S & F Rotational moulded polyethylene water 1000 ltr Capacity storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mmdia . (Minimum weight 2 0 m m - 2 1 0 g m s).Including taking down existing water tank and float valve. complete all as specified and directed.
Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm
Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 15mm complete all as specified and directed.
S&L in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply & fixed PVC flushing cistern low level of capacity of 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified & directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm (Make: Prayag/ Polytuff)
Excavation in trenches in soft/ loose soil exc 1.5 m deep and getting out including forming bottom to required level or slop for laying pipe, concrete bed manhole etc n.exc 10 Sqm on plan complete all as specified (pipe and concrete bed shall be measured and paid separately )
Returning filling in soft/ loose soil including spreading levelling ,watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.
Removing of excavated surplus materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specificed
Demolition or breaking up 150 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50 mtr complete all as specified and directed.
M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 for 150 mm bore of pipe complete all as specified and directed.
M&L Reinforced concrete pipes, class NP3, laid and jointed complete with collars 150 mm bore laid in trenches and jointed with CM 1:1 complete all as specified and directed.
Demolition of brick work of any description and in any position built in CM and removing rubbish upto a distance of n exc 50 mtr all as specified
M&L for brick work built in CM 1:4 with sub class 'B' bricks straight or curved on plan exc 6 m mean radius complete all as specified
M&L for rendering 15 mm thick on fair faces of brick work internal faces in manhole in CM 1:4 using WPC as per manufacturer instruction incl finishing the surfaces even & smooth without using extra cement all as specified
M&L rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 all as specified
Supply only integral water proofing compound ISI marked
Demolition of reinforced cement concrete as in cover slabs of any description, removal of debris to beyond MD land as directed complete.
M&L for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slab with plain fair faces and set in CM 1:4 all as specified
M&L TMT mild steel bars 6 mm to 8 mm dia cut to length, bent to shape required, including cracking, bending,spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips
All as per srl item No 35 above but 10 mm dia MS round bar as in handle complete all as specified and directed.
M& L Excavating in post holes (or similar holes)in hard dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and as directed
M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete.
S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.
Material & Labour Brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius .
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
Rendering 10 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured & paid seprately.
Material & Labour Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 1mm thick preparatory to distempering complete all as specified and directed.
Material & Labour for priming new surface of wall with alkal iresistant priming paint of and applying two coats of cement base paint complete all as specified and directed.
Taking down Chowkats or frames n. exceeding 1.5 Sqm each (Without taking off shutters from the frame).
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame).
Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each.
Taking down Shutter exceeding 2.0 Sqm each.
Supply & Fix Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
Supply & Fix 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply & Fix 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified and directed.
Supply & Fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerial type of one side and another face is covered with aluminium sheet, 0.5mm thick, fixed with aluminium alloys screws complete all as specified and directed.
Material & Labour preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed.
Supply & Fix Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators all as specified & as shown on drg .CEUZ/TD/1269/2008 SHT 1/1 to 1/3.complete all as specified and directed.
Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as perspecification & drawing complete all as specified.
Supply and Fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including all fittings complete all as specified and directed.
Supply & Fix Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed
Supply & Fix in repairs Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples
Supply & Fix Powder coated Anodised aluminium frame(Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Supply & Fix Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified & directed
Supply & Fix Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified complete all as specified and directed.
Supply & Fix Aluminium anodised handle extruded section of size 150mm complete all as specified and directed.
Supply & Fix Aluminium anodised handle extruded section of size 125mm complete all as specified and directed.
Supply & Fix 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
Supply & Fix Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.
Supply & Fix Aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed.
Supply & Fix Aluminium anodised barrel tower bolts extruded section of size150 mm, all as complete all as specified and directed.
Supply & Fix 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
Supply & Fix 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15micron snap on aluminium beading/glazing, clips etc complete all as specified and directed.
Supply & Fix Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as spd and direcetd.
Securing glass of any description in existing glass in metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be Measured )
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
Supply & Fix 3 mm thick sheet glass pin headed quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane all as specified and directed.
Supply & Fix sheet glass ordinary quality 3 mm thick in squares n exc 0.5 sqm each pane and glazing with complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Demolition of floor concrete in ground floors and pavings n exc15 cm thickness (below or above ground level) complete all as specified and directed.
Material and Labour for Non - skid coloured eramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over25 mm thick PCC 1:2:4 type B0 complete all as specified and directed.
Material and Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over25 mm thick PCC 1:2:4 type B0 complete all as specified and directed.
Material & Labour vitrified tiles double charged,10 mm thick ,area of each tile exc 0.36 Sqm but n.exc 0.42sqm, in floor etc set and jointed in neat cement slurry including 15 mm screed bed CM 1:4 over25 mm thick PCC 1:2:4 type B0 complete all as specified and directed.
Material & Labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including incl 10mm thick plaster in cm 1:4 complete all as specified and directed.
Supply & Fixed in repairs fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified
Supply & Fixed in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 univrsal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete alll as specified and directed.
Supply & Fixed in repairs 15 mm Stop valves, fancy type, chromium platedcast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified.
Supply & Fixed in repairs gratting 125 mm dia with waste hole of PTMT (Min weights 40 gms)
Supply & Fixed in repairs CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union as fixed in repair
Supply & Fixed in repairs vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover Code No.: C8094 but excluding flushing cistern and flush pipe of Make Parryware "Niagara" Code No C0252 or equivalent
Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed
Supply & Fixed in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.
Supply & Fixed in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 110 mm inclding dismantling of old U/S pipes complete all as specified and directed.
Supply & Fixed in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 75 mm inclding dismantling of old U/S pipes complete all as specified and directed.
Supply & Fixed in repairs PVC (SWR) bends 75 mm dia radius complete all as specified and directed.
Supply & Fixed in repairs PVC (SWR) bends 110 mm dia radius complete all as specified and directed.
Supply & Fixed in repairs PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
Supply & Fixed in repairs vitreous china WHB white, size 550 x 400mm including cast iron brackets, waste pipe of 32 mm dia and waste fittings, pillar tap brass, chromium with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed fixed in repairs
Supply and fix of Brass chromium plated 15mm wall mixer valve 3-in-1 for mixing hot and cold water, fancy type as per cat No.29281 of of Jaguar or equivalent of HR. Johnson/Parry ware including taking down the existing one.
Supply and Fix in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per cat no HF3342 of Jaguar or equivalent of HR. Johnson/Parry ware all as specified and as directed by the Engineer-in-Charge.
S&F 32mm dia PVC waste pipe for WHB 750mm long fixed in repairs complete all as specified and directed.
S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets fixed in repairs omplete all as specified and directed.
Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified.(Make CERA F2002201)
Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified
Rendering 10mm thick on fair faces of brick work in cement mortar 1:6 finishing even and smooth without using extra cement upto any height, work to be carried out in patches complete all as specified and directed.
Rendering 15mm thick on fair faces of brick surface in cement mortar 1:4 finished even and smooth without using extra cement, upto any height from GL, work to be carried out in patches complete all as specified and directed.
Rendering 10mm thick in CM 1:3 as in ceilings or concrete surfaces such as chajjas, upward facia, downward facias and similar items finished even and smooth including dubbing coat without using extra cement complete all as specified and directed.
Preparation of newly plastered surfaces of ceilling,upward facias etc and applying three coats of white wash complete all as specified and directed.
Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of primer complete all as specified and directed.
M&L for preparing the external newly Plastered surfaces of walls and applying two coat of Cement base paint over one coat of chalk whiting complete all as specified and directed.
Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying One coat of Oil Bound Distemper on wall complete all as specified and directed.
Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of Oil Bound Distemper on wall complete all as specified and directed.
M &L 3mm thick wall care putty on wall complete all as specified and directed.
Preparation of old decorated surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint on wall complete all as specified and directed.
Complete removal of existing treatment and applying two coat of apex exterior quality over a coat of primer complete all as specified and directed.
Preparing Old steel painted surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coats of synthetic enamel paint in any pattern complete all as specified and directed by Engineer in charge.
Preparing Old wood and wood based surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for point wiring in repair with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for light point / fan point /bell point controlled by one switch.omplete all as specified and directed.
All as per srl item No 119 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches omplete all as specified and directed.
All as per srl item No 119 above One socket outlet 6 amp controlled by one switch on indepdendent board.
M&L for point wiring in repair with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets for one 16 amp socket outlet point controlled by one switch on independent board.
S&F angle holder,in repair insulated polycabonate body with back plate complete.
S&F in repair switch piano flush button single pole one way 6 amp complete.
S&F in repair switch piano flush button single pole one way 16 amp complete.
S&F in repair socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F in repair socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universa
S&F in repair Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universa
S&F in repair Plug Top of socket outlet 6 amp complete.
S&F in repair Plug Top of socket outlet 16 amp complete.
S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp box type complete universal omplete all as specified and directed.
S&F in repair Switch socket combination 2 in 1, 3 pin, 5 Amp box type complete universal omplete all as specified and directed.
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module omplete all as specified and directed.
S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified.
S&F in repair ceiling rose 3 plates polycarbonate body complete.
S&Fin repair hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
S&F in repair bell push, flush type, 6 amp 240 volts complete.
S&F in repair door bell, AC, 240 volts, single pole complete.
M&L in repair for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-
2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.
2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in repair MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-
SPN, in repair 240 volts, 4 ways.
SPN, in repair 240 volts, 8 ways.
SPN, in repair 240 volts, 12 ways.
TPN, in repair 415 volts, 4 ways.
S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-
Single pole 6 to 32 amp.
Single pole 40 to 63 amp.
Double pole 10 to 32 amp.
Double pole, 40 to 63 amp.
Four pole 40 to 63 amp.
Note for MCBs & MCB DBs:- MCCBs, MCBs & MCB DBs shall be of the same make.
S&F in repair LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
All as pr Item No 159 here in before but for LED batten warm type (Yellow Lumen) omplete all as specified and directed.
S&F in repair LED batten (2 Fit ) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
S&F in repair LED fixture 18 watt including connection all as per Philips LED cat ref no. BN 021C LED20S PSU CDL/NW GR or equivalent in other specified make as approved.
S&F LED fixture 12 watt including connection all as per Philips LED cat ref no. BN 021C LED20S PSU CDL/NW GR or equivalent in other specified make as approved.
S&F in repair LED fixture 10/9 watt including connection all as per Philips LED cat ref no. BN 021C LED20S PSU CDL/NW GR or equivalent in other specified make as approved.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S PSU S1 PC or equivalent in other specified make as approved.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' , 36 watt 230 V 50 Hz, grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required.
All as pr Item No 24 here in before but for LED luminaire warm type (Yellow Lumen) complete.
M&L for Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed. (Unserviceable parts other than specified in this item if any will be measured seperately).
M&L for Servicing of Exhaust fans of capacity 300mm to 450mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed . (Unserviceable parts other than specified in this item if any will be measured seperately).
Rewinding of ceiling fan motor of size 1200mm/1400mm with super enamelled copper winding wire of appropriate gauge and weight affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete.
Rewinding of exhaust fan/wall monting fan motor of size 300mm with super enamelled copper winding wire of appropriate gauge and weight affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete.
All as per Srl Item No-172 here-in-above but for exhaust fan of size 400/450 mm of any make complete all as specified.
S&f in replacement ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete.
S& F in replacement of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan/exhaust fan in FR plastic casing including connection complete.
S& F in replacemen of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.
Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of ceiling fan suitable for 1200mm sweep ceiling fan of any make incl all accessories complete all as specified.
Replacement of Blade assembly of Exhaust fan with fixing hexagonal nut of size 300 to 450mm of any make.complete all as specified and directed.
Replacement of iron Frame of exhaust fan 4 way with welded and painted as directed.
M/L Gun metal bush of exhaust fan
S&f in replacement of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.
S&F in replacementl of PVC canopy suitable for ceiling fan of any size and make as required.
S&F in replacement of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.
S&F in replacement of down rod of ceiling fan made of GI pipe medium grade 15 mm bore of length upto 600 mm including cutting, threading, painting etc as required.
Taking down of desert cooler fixed at any position, cleaning internally and externally by scraping all scales dirt etc and repairs to desert cooler to check leakage, tightening ( By replacing screws, nuts and bolts etc ) including painting of desert cooler with spray machine with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer, letters, Refixing of the desert cooler after necessary oilling and greasing of fan and water lifting pump complete all specified and directed
Supplying in replacement Fan motor 1/6 HP, 230 volt, single phase for the existing desert cooler complete all specified and directed
Supplying in replacement Water lifting pump, Vertical type,18 watts, 230 volt, 50 C/S, single phase suitable for desert coolers complete all specified and directed
Supplying in replacement Side panel made out of 1.0 mm thick GI sheet, fixed with iron handle suitable for desert coolers of capacity 3000 cfm including two coats of synthetic enamel hammer tone paint over a one coat of red oxide primer on both side of panel complete all specified and directed
Supplying in replacement High density polythene pipe 15 mm dia complete all specified and directed
Supplying in replacement Complete steel body of desert cooler of capacity 3000 cfm duly painted with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer . The body of desert cooler shall be fabricated as under :- ( a ) The top and bottom made out of 1.25 mm thick GI sheet. ( b ) side panels (set of three) made out 1.00 mm thick GI sheet. ( c ) Front grill of suitable size and of approved quality.
Supplying and Replacement Three way water distributor, heavy duty, PVC, including necessary nuts and bolts complete and taking out old distributor complete all specified and directed
Supplying in replacement of capacitor 4 mfd suitable for Desert cooler complete all as specified and directed
Re-wiring of desert cooler with suitable size of copper conductor PVC insulated cable and providing main lead three metre long of 3 core PVC insulated copper conductor of size 23/ .0076 complete all specified and directed
Dismanting and taking out Old, Unservicable fan motor from the desert cooler and Rewinding with supper enamel copper winding wire of suitable size, varnishing etc including replacement of bushes, assembling testing and refixing at the existing site complete all as specified and directed
M& L for fabrication of desert cooler stand made out of MS angle iron 40x40x6mm thick all as per existing size suitable at site incl painting ith two coats of synthetic enameld paint over a coat of red oxide primer coat replacement complete all as specified and directed.
Repairs to voltage stabilizer of any make, single phase with input voltage 135 - 190 V and out put voltage 200-240 volt, capacity 5 KVA by dismantling and taking out burnt main transformer and rewinding with super enamelled copper wire of suitable size including varnishing and insulation material etc.complete all as specified and directed
All as per item No- 197 here in before but for capacity 03 KVA
All as per item No- 197 here in before but for capacity 01 to 02 KVA
Disconnecting the inlet and outlet connections of the existing Geyser 25/50 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places as directed by Engr in charge
S&F in place of unsv PVC connection of any make with (ISI Mark) having10mm dia, 45 cm long with steel reinforcement suitable for hot & cold water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers all as directed by Engr-in-charge.
Replacement of unserviceable heating element of geyser 2KW/1.5 KW of any pattern all as specified
Replacement of unserviceable thermostat of geyser 2KW/1.5 KW of any pattern all as specified
S & F in replacement of pressure release valve suitrable for 25/50 ltr electric water heater complete all as specified.
S&F in replacement of U/S apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.
Replacement of unserviceable Inner Tank of geyser steel body of capaciy 25/50 Ltrs as existing pattern all as specified
Replacement of unserviceable PVC flexible pipe inlet 16mm outer dia and 450 mm long for hot/cold water heavy duty with brass nuts & bolts.
Disconnecting the inlet and outlet connections of the existing solar water heater 300 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places as directed by Engr in charge
Replacement of unserviceable heating element of solar water heater 300 Ltr 2KW/1.5 KW of any pattern all as specified
Replacement of unserviceable thermostat of solar water heater 300 Ltr 2KW/1.5 KW of any pattern all as specified
S&F in replacement of apparatus plate of solar water heater 300 Ltr 25/50 litre capacity by brazing not exceeding 5 mm thick complete.
Replacement of unserviceable float valve with new brass Float valve of desert coolers complete any make 15 mm dia complete all as specified and directed.
Dismantling and servicing of cooling appliances including cleaning, painting, necessary test of leakage by nitrogen gas, brazing, compressed air wash and make the system functional complete all as specified for Acs window/ Split type of any capacity.
All as per item No 213 here in before but for Water Cooler of any capacity complete all as specified and directed.
All as per item No 213 here in before but for Refrigerator of any capacity
All as per item No 213 here in before but for Deep freezer of any capacity
Remove the unserviceable fan motor from window/Split AC any capacity removing the burnt out winding wire from slots, clean slots with emery paper and rewind the same with superior quality copper wire insulate properly and bringing back and fixing in position and testing and commissioning:-
All as per item No 217 here in before but for Water Cooler upto 150 Ltrs capacity
Replacement of unserviceable air Filter for Split AC.
S&F Relay of Refrigerator of the same make and type.
S&F for Disconnect the suction and discharge line to the unserviceable compressor, replace with the new compressor brought from the factory of the same make connect the refregerent lines systems flushing vacuumising of the entire system arrest all leakages including testing and commissioning for Split AC 1.5 ton capacity
All as per item No-221 here in before but for Water Cooler above 80 LTR upto 150 Ltrs capacity
All as per item No-221 here in before but for Water Cooler 40 to 80 Ltrs capacity
All as per item No-221 here in before but for Refrigerator 165 to 185 Ltrs capacity
All as per item No-221 here in before but for Deep freezer 165 to 185 Ltrs capacity
Replacement of unserviceable thermostat AC up to 1.5 Ton
All as per item No 226 here in before but for Water Cooler upto 150 Ltrs capacity
All as per item No 226 here in before but for Refrigerator up to 310 Ltrs capacity
Remove the unserviceable fan blade from the condenser cooling motor and replace with new fan blade of same size and type for Water Cooler any capacity
All as per item No 229 here in before but for Air conditioners up to 1.5 Ton.
S&F Blower assembly of suitable type for Air conditioners up to 1.5 Ton.
Replacement of unserviceable float valve with new brass Float valve of water cooiers complete any make 15 mm dia
Flushing & vacuumising the system and charging of necessary refrigerent at required quantity for Window AC/Split AC Up to 1.5 Ton
All as per item No 233 above but for Refrigerators of any capacity.
All as per item No 233 above but for Water coolers of any capacity.
Replacement of unserviceable Condenser AC up to 1.5 Ton
All as per item No 236 above but for Refrigerators of any capacity.
All as per item No 236 above but for Water coolers of any capacity.
S&F in repair 40 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required.
Dismantaling /Opening of upper portion of Disel Engine 62.5 KVA (Make : Greaves/ Kirloskar/ Cummins or any other make) air cooled,turbo charged ,Vertical type for top over hauling, repair/ servicing of engine including taking out rediator /fuel pump,water Pump,Turbo charger etc (Egnine oil and coolent reaquired for this job is deemed to be included in the quoted rate.
(a) Dismantaling/Opening of complete cyllinder head assebly rockers arms assemblypiston head assembly ,sleeves byremoving nuts &bolts for repair complete.
(b) Servicing & washing of complete engine partswith kerosine oil
( c) Re- assembling of engine after replacementof UNSV/defective parts with new parts as listed in given below per job shall be deemed to be included in this rates and testing of engineas per company recommendation after reassembling all parts as directed to the satifaction of the Engr-in -Charge
Note : Repair and Transportation (BY JCB / HYDRA OR ANY OTHER MEANS) charge for carrying out repair & reinstall on same installation back shall be deemed to be included in this rates
Supply inreplacement of following parts given below rates shall be deemed to be above job included .
i) Valve Exhaust
ii)Valve inlet
iii)insert Valve Seat
iv)Guide Valve
v)Cup Injector
vi) Fip Element
vii) Gasket Set
viii) Hose Pipe
ix) Fuel Filter
x) Lubrication Oil Filter
xi) Super By Pass Fillter
xii) Hose Clip Set
xiii) Piston set Complete
xiv Ring Set Complete
xv) Cyllinder Linner
xvi) Connecting Rod Bearing
xvii) Gasket Set Cyllinder Head
xvii) Callibration of Fuel Pump
xix )Head Repair Work
xx ) Callibration of injectors of Nozzels
xxi ) Lubrication Oil Pump
xxii ) O ' Ring Set Complete
xxiii) Set of Fuel Flexible Pipe
xxiv) Stem Seal
Dismantaling /Opening of upper portion of Disel Engine 30 KVA (Make : Greaves/ Kirloskar/ Cumiuns or any other make) air cooled,turbo charged ,Vertical type for top over hauling, repair/ servicing of engine including taking out rediator /fuel pump,water Pump,Turbo charger etc (Egnine oil and coolent reaquired for this job is deemed to be included in the quoted rate.
(a) Dismantaling/Opening of complete cyllinder head assebly rockers arms assemblypiston head assembly ,sleeves byremoving nuts &bolts for repair complete.
(b) Servicing & washing of complete engine partswith kerosine oil
( c) Re- assembling of engine after replacementof UNSV/defective parts with new parts as listed in given below Per job shall be deemed to be included in this rates and testing of engineas per company recommendation after reassembling all parts as directed to the satifaction of the Engr-in -Charge
Note : Repair and Transportation (BY JCB / HYDRA OR ANY OTHER MEANS) charge for carrying out repair & reinstall on same installation back shall be deemed to be included in this rates
Supply inreplacement of following parts given below rates rates shall be deemed to be above job included .
i) Valve Exhaust
ii)Valve inlet
iii)insert Valve Seat
iv)Guide Valve
v)Cup Injector
vi) Fip Element
vii) Gasket Set
viii) Hose Pipe
ix) Fuel Filter
x) Lubrication Oil Filter
xi) Super By Pass Fillter
xii) Hose Clip Set
xiii) Piston set Complete
xiv Ring Set Complete
xv) Cyllinder Linner
xvi) Connecting Rod Bearing
xvii) Gasket Set Cyllinder Head
xvii) Callibration of Fuel Pump
xix )Head Repair Work
xx ) Callibration of injectors of Nozzels
xxi ) Lubrication Oil Pump
xxii ) O ' Ring Set Complete
xxiii) Set of Fuel Flexible Pipe
xxiv) Stem Seal
Servicing of DG Sets of capacity 62.5 KVA of make (Make : Greaves/ Kirloskar/ Cummins or any other make) by the authorised Engineer of respective manufacturer of DG Set continous operational condition including the following checkings all as specified and directed by Engr-in -charge (Egnine oil and coolent reaquired for this job is deemed to be included in the quoted rate.
(i) Removing the existing engine oil, clean the oil sump and refilling with required quantity of new engine oil 20W40 & coolant upto top.
(ii) Checking of fan motor hub
(iii) Checking exhaust and inlet manifold belt and cap screw
(iv)Cleaning of radiator inside and out side thoroughly with solution (caustic soda) to the entire satisfaction of Eng-in-charge by removing and re-fixing in original position after cleaning.
(v) Checking and adjusting injector and valves, tappet and replace the gasket including cost of gasket.
(vi) Cleaning fuel inlet connections and screw,
(vii) Checking of vibration damper and rectified.
(viii) Servicing of turbocharger by checking, leakage tightening of mounting screws & nuts and replace oil.
(ix) Checking water temperature safety control
(x) Checking and correcting up impeller of water pump for excess play.
(xi) Servicing of governer and Changing of governor oil.
(xii) Checking and adjusting all fan belt.
(xiii) Any other check as per manufacturer`s instructions
Note:- Necessary spare parts required if any will be measured and paid under relevant items
(a) S & F in repairs Kit, fuel filter and ring
(b) S & F in repairs Element for Lubrication oil filter.
(c)S & F in repairs Kit, Element of super bypass filter.
(d) S & F in repairs Seal, O Ring and Air cleaner.
(e ) S & F in repairs Kit Conversion
(f )S & F in repairs Gasket, Rocker lever cover
All as per item no.3 above but DG Sets of Capacity 30 KVA DG set
(a) S & F in repairs Kit, fuel filter and ring
(b) S & F in repairs Element for Lubrication oil filter.
(c)S & F in repairs Kit, Element of super bypass filter.
(e ) S & F in repairs Kit Conversion
(f )S & F in repairs Gasket, Rocker lever cover
M&L for Rewinding of armature of Dynamo/alternators 12V/24V volts with `F' class copper wire to match existing gauge including dismantling of old coil , cleaning thoroughly winding with super enameled copper wire of existing size and gauge,varnishing, drying etc and fixed with dynamo/alternator properly tesing and commissioning all as specified all and directed by Engr-in-Charge.
S & F repair radiator hoses of size 40mm dia or as per existing dia and 60 cm length for any capacity of DG set including jublee clip, clamp nuts etc are properly fixed and connected.as directed to the satifaction of the Engr-in -Charge
S & F in replacement of flexible pressure pipe for lubricant size of 60 cm length for oil and fuel connection for complete suitable for 40/62.5/82.5 KVA Engineas directed to the satifaction of the Engr-in -Charge
Supply and filling Engine oil 20W/40f make (Castroll/Kirloskar/HP)
S& Fill distilled water packed in sealed gallan of 5 Ltrs
Supply and filling water coolant(diluted)in radiator (make volve line or equivalent) including removal of old water/coolant, all as directed by Engineer-in-Charge.
Dismantling and removing of water pump assembly of any capacity any type of DG Set complete from the engine,repair/overhauling the same by replacing tornout components like bearing,impeller,bushes, oil seal,water seal,gaskets etc. reassembling,refixing and testing complete as directed to the satifaction of the Engr-in -Charge
Repair/overhauling of self starter 12V/24V including replacement of worn out clutch assembly,bush,spring,plunger assembly, solenoid switch,carbon brushes,brush spring etc.as directed to the satifaction of the Engr-in -Charge for the 40/62.5/82.5 KVA DG Set
M & L for replacement of totally damaged self starter 12V/24V complete assembly suitable for any capacity of DG Set complete all as specified and directed.
Repair/overhauling of dynamo including replacement carbon, brushes holder, spring, commutator /slipring assembly bearing, regulator etc. of any make, type and capacity. complete all as specified and directed.
Supply in replacement of electrically operated fuel shut down valve assembly complete testing and commissioning as specified and directed by Engr.in-charge including dismantling and removal of old U/S valves of any capacity DG set.
Disconnecting and dismantling the alternator unit of 30 KVA DG Set from the base plate of the DG set and transporting to workshop for repair, dismantling the unit, further separating the armature from the startor carefully, cutting and taking out the burnt windings of the alternator carefully, cleaning the slots and , duly applying the insulation and assembling the stampings inserting in position in the startor including applying slot insulation and rewinding of the alternator startor winding with super enameled copper conductor of same gauge and same number of turns as that of existing one including replacement of carbon brushes tapping the windings and bringing out the coil conections for production of 3 phase 415 volt 50 HZ AC supply and preheating the windings and applying insulating varnish and drying the windings in oven and assembling the unit and transporting back to installation and fixing on base plate and coupling with the DG set and testing complete all as specified and directed.
Supply in replacement of diode assembly complete suitable to match the existing one of 62.5/40 KVA alternator excitor unit.
Supply in replacement of PVC insulated battery lead with 16 Sq.mm copper conductor cable of length 2 mtr with copper/brass clamps and lugs for fixing on battery terminals and self starter complete as specified and as directed.
Supply in replacement of rectifiers for alternators suitable for Gensets upto 40/62.5/82.5 KVA capacity complete as specified and as directed.
Supply in replacement of water temperature gauge complete with cable and accessories at the last range 0 to 150 degree centigrate complete as specified and as directed.
Supply in replacement of oil temp gauge as per existing site requirement complete as specified and as directed.
Supply in replacement of oil pressue gauge as per existing site requirement complete as specified and as directed.
Dismantling the defective Fuel Injector Assembly of any capacity from the existing foundation and engine including taking down all electrical connections transporting to approved authorised workshop, after setting up opening the complete, connector plate, gasket & complete overhauling re- assembling the Fuel Injector after transporting back to site re-installing carrying out alignment of complete DG set reconnecting up all electrical connections testing and commissioning complete the following capacity of DG set (Note:- (a) Rate quoted shall be deemed to be inclusive making good the distrubed surfaces (b) The DG set shall be tested for the satisfaction of Engr -in -charge to achive designed parameters.
(b) 62.5 KVA DG
(c) 30 KVA DG
Attending compliant and inspection/trouble shooting/repair the AMF panel of any rating 3 phase 415V 50Hz AC supply including checking the serviceability of individul components, cleaning / tightning of loose connections, identification of defective parts including replacement of minor parts like jumper conneting cables, connectors, lugs, fastners etc, complete as specified and as directed. Note : Defective parts / repair work to individual parts shall be measured and paid separately.
Supply and replacing the following spares including connecting into electric circuit, testing and commissioing.
(a) Solonoid valve 24V of suitable for 62.5 KVA to 82.5 KVA
(b) Solonoid valve 12/24V of suitable for 30 KVA to 40 KVA
(c) Changer relay AC 230V suitable for DG set AMF panel of rating 30 KVA to 82.5 KVA
(d) Changer relay DC 24V suitable for DG set AMF panel of rating 30 KVA to 82.5 KVA
(e) Time relay AC 230V suitable for DG set AMF panel of rating 30 KVA to 82.5 KVA
(f) Time relay DC 24V suitable for DG set AMF panel of rating 30 KVA to 82.5 KVA
(g) Coil 230/430V +/- 5% AC 50Hz
Supply and fixing in replacement of Digital volt meter as per existing size complete all as specified and directed.
Supply and fixing in replacement of Digital Amp meter as per existing size complete all as specified and directed.
Supply and fixing in replacement of Digital Frequency meter as per existing size complete all as specified and directed.
Supply and fixing in replacement of indicator lamp assembly complete LED type suitable for the existing system supply voltage for the existing system supply voltage 230V / 440 V AC including taking down old lamp assembly
Supply and fixing in replacement of AVR unit of 62.5 KVA to 30 KVA for matching the existing AVR unit, complete all as specified and directed by Eng-in charge. Make:- Kirloskar/Cummins/Ashok Leyland/Stanford.
S & F in repair battery terminal brass superior quality suitable for 180 AH 12 Volts Battery
S&F free lead acid battery 12 volts 180 AH complete all as specified and as directed by Engr-In-Charge.
M&L for servicing/ cleaning of MS diesel tank of DG set 62.5/40/30 KVA by draining out the diesel from tank, cleaning the tank with soap water/ suitable solution and painting the external surface with one coat of synthetic enamel paint of existing colour including repalcement of drain valve, outlet pipe complete all as specified and as directed.
S&F in replacement, fan belt suitable for 40/30 KVA DG set complete all as specified and as directed.
S&F in replacement, fan belt suitable for 62.5 KVA DG set complete all as specified and as directed.
Dismentling/ taking down complete radiator assembly of DG set 62.5 KVA and transporation to market for repair by :- (i) Opening the radiator assembly with brazing/ welding for repair/ services. (ii) Cleaning of all water tube with diluted solution of HCL & cleaning with water preasure & removing the sludge and dust from inside the tank by flushing out. (iii) Repair of fins by soldring/ brazing. (iv) Repair of bottom brass water tank by soldring/ brazing. (v) Repair of radiator hose assembly. (vi) Fixing the complete radiator assembly to its orignal position and testing complete
Dismentling/ taking down complete radiator assembly of DG set 30 KVA and transporation to market for repair by :- (i) Opening the radiator assembly with brazing/ welding for repair/ services. (ii) Cleaning of all water tube with diluted solution of HCL & cleaning with water preasure & removing the sludge and dust from inside the tank by flushing out. (iii) Repair of fins by soldring/ brazing. (iv) Repair of bottom brass water tank by soldring/ brazing. (v) Repair of radiator hose assembly. (vi) Fixing the complete radiator assembly to its orignal position and testing complete
S&F in replacement of Change over switch off load type with enclosure, conforming IS 13947 part I & III 415V, 4 pole of rating 100 amps, including taking out unservicable one complete all as specified and directed by Engineer-in -Charge.
S&F in replacement of Change over switch off load type with enclosure, conforming IS 13947 part I & III 415V, 4 pole of rating 200 amps, including taking out unservicable one complete all as specified and directed by Engineer-in -Charge.
S&F MCCB four pole 125 Amps, 35 KA fixed thermal & fixed magnetic setting including 4 spreder link set of same make as that of MCCB for connection and lugs as required all as complete as specified and directed.
S&F MCCB four pole 63 Amps, 25 KA fixed thermal & fixed magnetic setting including 4 spreder link set of same make as that of MCCB for connection and lugs as required all as complete as specified and directed.
Attending compliant / servicing / repair the servo controlled voltage stabilizer of capacity 25 KVA to 200KVA single/3 phase, (having input voltage of 160V to 260V and out put voltage stabilized at 220+9% for single phase and 300 to 460V input (Approx) and out put voltage stabilized at 430+ 1% V for 3 phase) with balanced / unbalanced load including checking the serviceability of individul components, cleaning / tightning of loose connections, including replacement of minor parts like jumper conneting cables, connectors, lugs, fastners etc complete all as specified and directed.
Taking out/removing the defective barrier assembly/ dimmer coil from the volatage stabilizer by manually/using chain pully block, transporting to workshop, removing the burnt windings cleaning and rewinding, with existing size super enamelled copper wire, varnishing, heating and transporting to site for refixing for the following capacity of stabilizers. Note : Old burnt copper winding will be measured and issued to contractor under Sch of credit.
(a) 25 KVA single/3 phase
(a) 50KVA to 75KVA single/3 phase
Filtration of transformer oil of Voltage Stablizer oil type up to 150 KVA capacity installed at different sub stations/locations using filtration plant , dehydration and improving di-electric strength of the oil to withstand 40 KV for one minute including testing of oil as specified and directed. NOTE : Stablizer oil test kit shall be provided by the contractor at site for testing of oil.
Filling in with new transfor oil for Voltage stabilizer oil EHV grade low viscosity of approved make as per IS-335 of 1992 and die-electric strength 20 KV when tested at 1mm gap incl submission of certificate fro IS approved lab for desired value of die-electric strength complete all as specified.
Cleaning the internal surfaces of volage stabilizer to free from dust/sediments/rust, removing transformer oil (where ever exists) and refilling, refixing the barrier assembly including connecting all electric/electroni/mechanical components, testing and commissioing for the following sizes:
(a) 25KVA single/3 phase
(b) 50KVA to 75KVA single/3 phase
Disconnecting the input/output electri supply 3 phase and Neutral AC 50Hz/single phase conections, removing the top cover for taking out defective voltage stabilizer including disconnecting connected electri/electronic/mechanical components of the following capacity stabilizers for repair after repair refixing the same position complete etc all as specifiedand directed. Note : Defective parts/ repair work to individual mparts shall be measured and paid separately.
(a) 25 KVA single/3 phase
(b) 50KVA to 75KVA single/3 phase
Supply and fixing in repair following spares including removing of respective defective spares of servo controlled Voltage stabilizer single/3 phase having standard input/out put voltages.
(a) Push button switch
(b) Auto manual switch
(c) DPDT switch
(d) Micro switch
(e) Panel phase indication lamp
(f) Potential meter
(g) High low indicator lamp
(h) Voltmeter 0 to 500 Volts
(j) Ampere meter 20 to 100Amps
(k) Current transformer 5VA to 10VA class 0.5 of rating 30, 50, 60, 75, 100, 150, 200/5A
(l) Electronic circuit card including Control drive transformer with wiring.
(m) PCB Holder
(n) Rotary switch 5A for 3 phase.
(n) Servomotor for 25 KVA to 50 KVA Voltage stabilizer
(o) Servo motor for 75 KVA Voltage stabilizer
(p) Carbon brush
(q) Carbon brush holder with spring
(r) Drive assembly upto 25KVA per phase
(s) Drive assembly 75 KVA per phase
(t) Toggle switch single pole one way 5Amps
(u) Motor gear pinion
(v) Digital Control panel with circuit board for High/Low voltage cut suitable upto 50 KVA 3 phsae voltage stabilizer.
(w) Digital Control panel with circuit board for High/Low voltage cut suitable for 75 KVA 3 phsae voltage stabilizer.
Dismantling from electric circuit cleaning to free from dust/rust/oil/grease etc preparation of external surfaces and spray painting with two coat of synthetic enamel paint of approved colour for Voltage Stabilizer and refixing the same with new thimble, washers etc all as specified and directed.
S&F of 35 W LED Street Light luminaire confirmining incliding all necessary arrangemet for fixing on Pole made up SITC of high quality integrated LED street light with a minimum system lumen of 4500 Lm and system wattage not exceeding 35 W with nominal effiiciency 110 lumen/Watt. CCT of 5700K with SDCM of <5 and CRI>70. The housing should be of non- Corrosive high - pressure die cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF>0.95. Life time of 50K Hrs @L70. The ingress protection should be minimum IP 66 with IK ratingof 0.7. The luniunaire should have 5 KV internal 10 KV external surge protection in the luminaire. incl takin down old unsv light fittings complete all as specified and directed.
S&F of 60 W LED Street Light luminaire confirmining incliding all necessary arrangemet for fixing on Pole made up SITC of high quality integrated LED street light with a minimum system lumen of 6600 Lm and system wattage not exceeding 60 W with nominal effiiciency 110 lumen/Watt. CCT of 5700K with SDCM of <5 and CRI>70. The housing should be of non- Corrosive high - pressure die cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF>0.95. Life time of 50K Hrs @L70. The ingress protection should be minimum IP 66 with IK ratingof 0.7. The luniunaire should have 5 KV internal 10 KV external surge protection in the luminaire. incl takin down old unsv light fittings complete all as specified and directed.
S&F of 70W LED Flood Light luminaire made up of Matt black ptextured powder coated pressure Die Cast aluminum housing and frame with heat resistant toughened clear glass fixed with SS screw/ Ant dust exposed lens, sturdiness and embossed brand name/ logo name of manufacturer on fixture. The luminaire should have a minimum system lumen output of 10800 lumens and 70 Watts. The fixture shall have a CRI of minimym 70. The fixture shall be designed for a system life of 50000 hours @ 70 % lumen maintenence , Ingress protection of IP 66 (lamp and gear compartement) and Mechanical impact resistance rating of IK>=07. The fixture driver should have an operaing voltage rang of 20-277V, surge protection of 10 KV, PF. 0.95, THD<10% inc taking down old unsv light fittings complete all as specified and directed
Nitika electricals and engineers works (BID ID -3073993)
BMMJ TRADERS AND ENGINEERS (BID ID -3079108)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .