Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.0 L+₹84,190 (2.89%)Rejected-Finance 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹30.0 L+₹87,575 (3.01%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹30.5 L+₹1.3 L (4.59%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹31.0 L+₹1.9 L (6.37%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹27.4 L
EMD Value
₹54,900
Closing Date
31 Aug 2021, 6:00 pmClosed
GE (AF) Bamrauli
GE (AF) Bamrauli
REPAIR MAINTENANCE TO ROOF TREATMENT CHAJJAS AND OTHER ALLIED MISC WORKS AT SNCOS COMPLEX HAPPY HOME AND NORTH CAMP ETC UNDER GE (AF) BAMRAULI
2021_MES_467059_1
8670/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Bamrauli
₹54,900
Yes
8 Sept 2021
11 Aug 2021
1 Sept 2021
11 Aug 2021
31 Aug 2021
26 Aug 2021
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair, complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 as on ceiling surfaces of brick work or concrete surfaces finished even and fair all as specified and directed.
M&L for preparation of new wall surfaces and applying three coat white wash complete all as specified and directed.
M&L for preparation of new wall surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant cement primer complete all as specified and directed.
M&L for preparation of new wall surfaces and applying two coat of cement base paint over cement wash with white cement complete.
M&L for preparation of old wall surfaces and applying one coat of cement base paint complete.
M&L for preparation of new wall surfaces & applying three coat white wash on new ceiling surfaces complete. all as specified and directed.
S&F in repair Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe including seat cover white etc. complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white incl ball valve flat and handle incl brackets Flushing cistern and flushing pipe (exclusive of brackets) complete all as specified and directed.
S&F in repair for PVC floor traps plain with graiting including jointing with solvent cement 75 mm bore complete all as specified and directed.
S&F in repair wash basins, vitreous China white size 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed
S&F Waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with Low density poly ethylene pipes (LDPE) 0.9 mtr long 32 mm dia pipe complete all as specified and directed.
S&F in repair stop valve, 15 mm dia cast copper alloy, chromium plated with fancy type (angle type) screwed down, high pressure, screwed both ends for iron pipes complete all as specified and directed.
S&F in repair fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
M&L for Dismantlings PVC water tanks exc 250 but n. exc 500 ltrs complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylingdrical vertical with closed top) rotetional threded tank cover hoisted and fixed in position.
S&F in repair gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete
S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs complete all as specified and directed.
M&L for Demolition of brickwork built in any type of mortar, complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
M&L for Demolition of Bricks (laid flat or on edge) or brick tiles in floors, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for Demolition of Concrete in roof padding, lime concrete / mud puska/ suken floor or any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for Wire brusing & cleaning top surface of tiles, lime terracing or cement concrete, including flashings & junction of parapets, etc. complete all as specified and directed.
M&L for PCC in roof kerbs of mud stops, rounded or chamfered on edges, incl roof padding type B0 (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.
M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.3 Kg/Sqm (iii)Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified glass fiber reinforcement water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed.
M&L for 40mm thick brick tiles laid on cement mortar 15mm thick screed bed CM (1:6) and grouted flush in CM (1:3) complete all as specified and directed.
As per item Srl No. 31 above but except tile complete all as specified and directed.
S&F Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing including providing skirting upto 150 mm height along the parapet walls in the same manner Make: Johnson Endura or eqvelent from list of makes
M&L for post construction anti-trmite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors
M&L for injecting chemical emulsion for post Constructional anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete
M&L for post construction anti-trmite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron
M&L for post construction anti-trmite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same
M&L for rendering 15mm thick in cm (1:3) on surfaces of brick, concrete walls, chajja surface finished even and smooth using extra cement with 2% WPC by weight of cement, applying two coat polymer modified cementitious, elastomeric waterproof coating 1mm thick (Dr. Fixit Bothseal WPC) WPC shall measure and paid separately under respective item as supply only complete all as specified and directed.
Sypply only Liquid water proofing compound (Dr. Fixit Bothseal WPC) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,
M&L for vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade including screed bed 15 mm thick in CM 1:6 complite all as specified and directed.
M&L for Non- skid ceramic tiles7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.
M&L for cement concrete 25mm thick type B-0, 1:2:4 (12.5 mm graded aggregate) complete all as specified and directed.
M&L for Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complite all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4 complete all as specified and directed.
S&F in repair PVC (SWR) pipes 100/110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.
All as per Srl item No. 46 above but 75mm bore. complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bends, of any radius provided without access door. complete all as specified and directed.
All as per Srl item No.48 as above but 75mm bore. complete all as specified and directed.
Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.
Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.
M&L for Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
All as per Srl item No 52 but fixing only complete all as specified and directed.
M&L for Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
All as per Srl item No 54 but fixing only complete all as specified and directed.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
Pleiad Complex On
M/S AM ENTERPRISES
M/S SURISONS
M/S Rakesh Singh
A S ENTERPRISES
bharat construction
M/s DHARAM VIR GHAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .