Repair and Maintenance of common toilet and miscellaneous work at RTDC Hotel Panna Chittorgarh

Providingand laying inposition cement concrete includingcuring,compactionetc.completeinspecifiedgradeexcludingthecostofcenteringandshuttering-Allworkuptoplinthlevel. M10 grade Nominal Mix1:3:6(1cement :3coarsesand:6gradedstone aggregate40mm nominal size).

Providing and laying cement concrete including curing,compaction etc. complete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts, struts, buttresses, string orlacing courses, parapets, coping, bed blocks, anchor blocks,plain window sills, fillets, levelling course etc up to floor fivelevel excluding the cost of centering and shutteringM10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate0mm nominal size).

Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in :Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in :

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajasthani Black Above 3601 Cm2 Slabs

Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone Work Full Edge moulding

8 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 450 mm X 450 mm

P & F 1st quality Heavy Duty Vitrified Double Charged tiles in walls, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in allcolour and shade, including grounting the joints with white cement and matching pigment etc complete, size 600 mm X 1200mm (excluding the cost of cement plaster)

Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesiveper sqm of tile area, in average 3mm thickness instead of cement mortar.

Plaster onnewsurfaceonwalls incement sandmortar 1:4 including racking of joints etc. complete fine finish : 20mm thick .

6mmthickcementplastertoceilingofmix 1:3(1cement :3 fine sand)

Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps : (1) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (2 )Applying Epoxy primer on the exposed steel bars.(3)Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush. (4) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.(5) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete (6)Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only)

Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding:

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. completeand stacking within 50 meters lead: Of area exceeding 3 square meter

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge.

Providing and fixing of uPVC casement fixed windows or ventilatorsmanufactured in ISO 9001:2000 & 14001:2004 certified company.Frame : Made from the Extruded uPVC Window Profile Section of size60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3box multi-chamber construction, White in finish, duly reinforced with1.2mm thick G/J/U/O TYPE GI section. All the four corners shall bemitered cut & thermal welded so as to form window frame. Frame shallbe milled with drain and air equalizer hole in order to be water tight andfor drainage of accumulated water, if any, to outer side. Fix Mullionmade of 76 x 60mm uPVC Profile Section with steel reinforcement shallbe provided in windows as per the requirement. Frame shall have „O‟type EPDM gasket fitted in in-built groove of frame profile for properair & sound insulation of the shutter. Glazing bead of size 34 x 20mmwith „K‟ & „O‟ type innerand outer EPDM weather seal gaskets alongwith 5mm thickISI make plain float glass.All welding joints of frame andshutter shall be cleaned and milled with the CNC mechanismto provide uniform grooved finish on all visible joints.Hardware : Installation at Site : Complete window is to beinstalled on site with 10 x 100mm fastners with white cap inexisting pre-finished wall cut-out cemented to glass level planeat all height & width and silicon glue is applied to fill up thecrevices between wall and window frame. Complete in allrespect as per the drawing and specifications and direction ofengineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 50 mmx 25 mm x 2.1 mm

Random rubble dry stone Kharanja under floor.

Carriage of Building Rubbish Stone metal (Grit and ballast etc.) For 10 Km.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART B Sanitary Work Based on PWD BSR 2022 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings, this included jointing of pipes & fittings withone step CPVC solvent cement ,trenching refilling & testingof joints complete as per direction of Engineer in Charge.(External work).

20mm nominal size

25 mm nominal size

40 mm nominal size

50 mm nominal size

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

75 mm dia

110 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

socket

(i) 75mm dia

(ii) 110mm dia

Reducer 110 X 75 mm

(i) 110 mm dia

Plain Tee

(i) 75mm dia

(ii) 110mm dia

(i) 75mm dia

(ii) 110mm dia

(i) 75mm dia

(ii) 110mm dia

(i) 75mm dia

(ii) 110mm dia

Door Bend

(i) 75mm dia

(ii) 110mm dia

Plain floor trap

110mm dia

Vent Cowel

75mm dia

Door Cap

75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC)SWRPipesfittingstypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make

Nahni Trap with Jali 4”

110mm dia

P & F Grating of approved quality/make: Stainless Steel Sheet size 125mmdia. Heavy Quality of approved make

P&F15mm.DiaConnectionPipeofapprovedquality/make. PVC pipe with C.P. Brass nuts upto length, 600mm

P&FFull-way Valve (IS:778Mark) or wheel valve of approved make : .

Gun-metal40 mm nominal size

Supply & fixing G.I. Union ISI marked in G.I. pipe line asrequired complete in all respect of size :40mm dia nominal bore

P&FPVCStorageTank ISIMarked(IS:12701) indicatingtheBISlicenseNo), ofapprovedmakewithcover,25mmdia1MlongG.I. over-flowpipe&25Cm. longwashout pipewith plug & socket, including making connection etc.,complete of approved design: 1000 litres capacity

P&F footvalve of superior quality and approvedmakewith fittings : CI 25 mm

P&FlstqualityWVCUrinal (IS:2556mark)with25mmdiaG.I. waste pipe, dome waste couplings, concealed ironbrackets or screws etc complete. Mini stall size 455x385x350mm.

P&FC.P.brassUrinalSpreader forstallurinalofapprovedmake.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART C Electric work Based on PWD BSR 2022 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, errules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

2 x 1.5 sq.mm

2 x 2.5 sq.mm

2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419- 1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work referAnnexure 'A' attached with this BSR

On board

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Single pole MCB (With B/C curve tripping Characteristics)

6 A to 32 A rating

Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Fixing of of ventilating fans Capacitor start, copper wounded, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 250 mm sweep

Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR. 18/20 Watt

Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1170mm(+/-10%) LED batten with min. lumen output 2200 lm

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part D NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling of existing toilets i/c dismantling of plaster, Wall and floor Tile, GI pipes, CI pipes with fittings, sanitary wares complete with care & as per direction of E.I.

Carriage of Building Rubbish Stone metal (All dismantled material) as per direction of E.I.

Recovery of the dismantled material of toilets

P/F looking mirror 5 mm thick on walls (Atul/eqnivalunt) with back of 6mm thick water proof ply, with 50 X 20mm heritage decorative design bidding of MP teak wood on all the four sides with polish. Complete as per direction of E.I.

Recovery of the damaged windows, wooden doors, frames taken out from rooms & toilets

Providing & Fixing Premium Quality (Hindware/ Cera make) white glazed WC vitreous china Sanitary Wares as per direction of Engineer-in-charge including cutting and making good floor, One piece W.C with seat cover and cistern with plate

Providing & Fixing premium quality (Hindware/ Cera make) WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make, Size 550 mm x 400 mm dia for counter Top

Providing & Fixing premium quality (Hindware/ Cera make) WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make, Size 550 mm x 400 mm dia for pedestal type.

Providing & Fixing Jaguar Continental prime series or equivalent make as approved 1. Bottle trap internal portion 32mm, size 250mm long wall connection pipe & wall flange with waste coupling as per approved by Engineer in Charge.

Providing and fixing Jaguar Continental prime series or equivalent make as approved by E.I. CP Brass fittings of approved make as per direction of Engineer-in-charge

Two way Bib Cock 15 mm nominal size

Bib Cock 15 mm nominal size

Angular stop cock with inlet connection, long thread 15 mm nominal size

Pillar Cock

Wall mixer concealed single lever divertors of superior quality and approved make: C.P. brass Tip-tone divertor bath spout with mixing valve.

600 mm long towel rail

Revolving type towel ring

Soap dish

190 mm rain shower

Shower arm length 450mm

Paper holder

Soap dispenser

Health focet (Premium heavy Quality) as approved by Engineer-in-Charge

Hook 4 rod

Add extra for using premium quality tiles like Kajaria/ Somany or equivalent of following size

Heavy Duty Vitrified Double Charged tiles size 600 mm X 1200mm

Providing and fixing pvc door including frame and all type accessories.

Providing and laying 5 layer water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing SBR super latex ratio of 1:2:4 ( 1 ltr SBR : 2 ltr water : 4 cement ) consisting of applying :(i) after surface preparation, first layer of slurry of cement and SBR . second layer of Fiber glass net 45 GSM when the first layer is still green . Overlaps of joints of fiber net should not be less than 10 cm . then apply 4 layer of SBR in alternete direction each layer should be in gap of 12 hour still layer shall be green . This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken on parapet wall and tucked into groove in parapet all around . complete as per the direction of engineer incharge.

Labour charges for dismantling of existing old unserviceable electrical wiring with conduit, switch board, switches and sockets etc

Recovery of old dismantled/ unserviceable electric wiring with conduit, switch board, switches and sockets etc

Labour charges for dismantling of existing old unserviceable electrical accessories like fans, geysers, exhaust fan etc complete. Handing over all serviceable material to the unit incharge as per direction of EIC.

S&F heritage type mirror light fixture with led fency light tri color, 2 feet length all as per approved sample.

Recovery of old dismantled/ unserviceable GI pipe of dia as per direction of E.I.