REPAIR MAINT OF SUBMERSIBLE PUMP, MONO BLOCK PUMPS UNDER GE WEST MATHURA

Amount

Lifting of Borewell pump motor set 5HP to 20 HP from 40 Mtr depth (approx.) including and upto 100mm dia column pipe, shaft assembly, dismantling the pump set complete with the help of chainpully block and other T&P as required at site all complete all as specified and directed.

M & L for cleaning of borewell of size 150 mm to 250 mm with the help of air compressor and water jet by overflowing the silt deposited in the borewell without damaging the exiting casing pipe and perforated pipe any size of depth upto 60 mtr and disinfecting the borewell with the help of calcium hypochlorite based granulars. Note:- (i) Borewell will be cleaned till the entire satisfaction of JE/Engr-in-Charge. (ii) Cost of water bozer required for overflowing the silt will be included in the quoted rate.

Lowering of Borewell pumpmotor set 5 HP to 20 HP upto 40 Mtr depth (approx.) including and upto 100mm dia column pipe, shaft assembly, with the help of crane and other T&P as required at site complete with replacement of wornout / rusted nuts and bolts, painting to column pipe with one coat of rubber based paint, complete commissioning and testing for 8 Hrs continuous upto satisfaction complete all as specified and directed. Note:- Nut bolts, paint and T & P required to be replaced will be included in the quoted rate.

Supply, installation, jointing and testing in replacement MS Galvanised Pipe heavy class of size 200 mm dia with all fittings including welding and any type of fitting required to make a joint all as specified and directed.

Supply, fixing and installation PVC Pipe 10 Kg/cm2 pressure of size 200 mm in replacement of old rusted broken PVC pipe of size 200 mm and jointing by socket, bend, tee or any type of PVC fitting all as specified and directed by Engr-in-Charge.

Supply, fixing and installation PVC Pipe 10 Kg/cm2 pressure of size 150 mm in replacement of old rusted broken PVC pipe of size 150 mm and jointing by socket, bend, tee or any type of PVC fitting all as specified and as directed by Engr-in-Charge.

S&F in replacement MCCB 4 pole 320 Amps, 415 volts, type 36 KA breaking capacity with adjustable thermal & magnatic setting complete all as specified and directed.

M&L in replacement starter 30HP with direct on line submersible pump PSE18 soft starter three phase star delta fully automatic 30 HP, overload relay range 32-104 (Amp) equivalent to ABB 1SFC132369M9901 or equivalent in make specified in Appendix 'B' complete all as specified and directed.

Labour and T&P for lifting of submersible pump set 30HP from 60 Mtr depth (approx.) including column pipe, Submersible cable complete with the help of chainpully block and other T&P as required at site transporting to civil workshop for repair & back after repair, lowering including replacement of rubber sheet, nuts & bolts connecting to existing system and testing on full load complete all as specified and directed.

M&L for rewinding submersible motor 30 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

M&L for rewinding and refixing after rewinding the same motor of Centrifugal pump of capacity 25 HP, three phase 415 volts, 50Hz AC with super enameled copper winding wire of suitbale size and gauge including insulating material, heating drying,re-assembling and testing complete all as specified and directed by Engineer in Charge.

Labour and T&P for lifting of submersible pump set 2 HP to 15HP from 40 Mtr depth (approx.) including column pipe, SB cable complete with the help of chainpully block and other T&P as required at site transporting to civil workshop for repair & back after repair, lowering including replacement of rubber sheet, nuts & bolts connecting to existing system and testing on full load complete all as specified and directed.

Dismantling of submersible pump & motor of any capacity, any description and replacement of worn out/rusted nuts & bolts, reassembling after repair, connecting and testing all as directed. Note : (i) Rate of taking down of old unserviceable spare parts shall be included in quoted rate of this item. (ii) Supply of spare parts shall be measured and paid seperately under respective items.

Supply only PVC impeller suitable for 2 HP SB pump complete all as specified and directed.

Supply only SS impeller suitable for 5 HP SB pump complete all as specified and directed.

Supply only SS impeller suitable for 7.5 HP SB pump complete all as specified and directed.

Supply only SS impeller suitable for 10 HP SB pump complete all as specified and directed.

Supply only SS impeller suitable for 12.5 HP SB pump complete all as specified and directed.

Supply only SS impeller suitable for 15 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 2 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 5 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 7.5 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 10 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 12.5 HP SB pump complete all as specified and directed.

Supply only complete shaft sleeve (Bush) suitable for 15 HP SB pump complete all as specified and directed.

M&L for rewinding submersible motor 2 HP, single phase, 230 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

M&L for rewinding submersible motor 5 HP, three phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

M&L for rewinding submersible motor 7.5 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

M&L for rewinding submersible motor 10 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

M&L for rewinding submersible motor 15 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.

Supply & fixing / lowering in replacement of uPVC / HDPE pipe heavy duty ISI marked of size 100mm dia, complete all as specified and directed.

Supply & replacement of MS column pipe heavy duty ISI marked of 80 mm bore, 3.0 mtr long both end threaded with one socket suitable for Submersible pump sets complete all as specified and directed.

Supply & replacement of MS column pipe heavy duty ISI marked of 100 mm bore, 5.4 mm thick, 3.0 mtr long both end flanged with nut bolts packing sheet suitable for Submersible pump sets complete all as specified and directed.

Supply, install and testing in replacement submersible pump motor copper winding 3.7KW/5 HP @270LPM at 40 mtr head all as directed and specified. Note: Old submersible pump will be deposited to AGE E/M Yard after removable.

M&L for in replacement starter 5HP with direct on line submersible pump starter three phase star delta fully automatic 5 HP, 3.7 KW, overload relay range 9-13 (Amp) complete all as specified and directed.

M&L for in replacement starter 10HP with direct on line submersible pump starter three phase star delta fully automatic 10 HP, 7.5 KW, overload relay range 17-25 (Amp) complete all as specified and directed.

M&L for in replacement starter 12.5HP with direct on line submersible pump starter three phase star delta fully automatic 12.5 HP, 9.3 KW, overload relay range 17-25 (Amp) complete all as specified and directed.

M&L for in replacement starter 15HP with direct on line submersible pump starter three phase star delta fully automatic 15 HP, 11 KW, overload relay range 23-32 (Amp) complete all as specified and directed.

Supply and laying in replacement PVC copper cable FRLS 10 Sqmm single core laid in open with the help of saddles of suitable size alongwith nut bolts all as specified and directed.

M&L for in replacement submersible copper cable flat three core PVC insulated & PVC sheathed industrial cable for submersible pump motors three core nominal area of conductor size 6 Sqmm complete all as specified and directed.

M&L for in replacement submersible copper cable flat three core PVC insulated & PVC sheathed industrial cable for submersible pump motors three core nominal area of conductor size 10 Sqmm complete all as specified and directed.

M&L for repairing of sluice valve with opening and taking out old unservercible defective spindle and refix the same after taking out the spindle transporting to workshop for machine work in only old gun metal/stainless steel spindle by making new threads on lathe machine with check nut, rubber gasket, gland packing, nuts & bolts all as required at site and directed by Engineer-in-charge for the following sizes:-

100mm dia bore

150mm dia bore

200mm dia bore

250mm dia bore

125mm dia bore

S&F in replacement Security Light LED 70W of new generation energy saving and environmental friendly longlife LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having Top openining seperate driver compartment with IP-66 protection and impact resistance of IK-07 with 10 KV Built surge Protection Devices and electronic driver including suitable pipe for light fiftings, bolts, brackets and necessrary painting of connected accessories complete all as specified and as directed.

S&F in replacement of Post Top Lantern 35 Watts the system shall include FRP housing Hi-brightness W-LED (120-140 lumens per watt) operating voltage 11.1/12.8V, IP-65 complaint driver efficieny 85% to 90% CRI > 70 CCT 5000 to 6500 kelvin toughen glass/acrylic cover complete with GI iron pipe 65 mm dia, medium grade, 5 mtr high excluding 1 mtr planting depth with aluminium painted foundation of pole with PCC (1:3:6) using 20 mm graded stone aggregate of size 450 x 450 x 1000 mm deep including necessary earthwork complete all as specified and directed.

M&L for maintenance and up keeping of all pump, motor and LT panels install inside any pump station the contractor is deemed to provide following:- (i) Checking and maintenance of all connections gauges etc all pump sets 50 HP capacity and endorse the status in register. (ii) Checking and maintenance of voltage meters, Amp meters and checking of RYB phase indicators, CTS incl all electrical connection of LT panel incl endorse the status in register. (iii) Checking and maintenance of leakage of transformer oil from starters all connections of moving auxillary, contacts coil, relays etc in all respect of oil immersed and electronic starters.

(iv) Arresting of leakage from pumps, sluice valves by filling gland etc and make the pump set leak proof. (v) Maintaining the allingment of pumpsets, maintaining the vibrations by filling necessary gland packing and allied works for avoiding the loss of pump sets due to mechanical faults and electrical faults to prevent the motor winding burning, damage of pump shafts, coupling, casing of pump sets etc and restrict the abnormal sounds in pump sets.

Note: (a) The necessary gland packing, rubber insertion sheets, insulation tape, grease, oil and nut bolts of any size shall be provided by the contractor and rates quoted deemed to . (b) T&P helpers for repair and maintenance are responsibiltiy of contractor without any extra cost. (c) Any defect found and not intimated by the technician , penalty of Rs. 5000 or cost of defect rectification which one is feasible will be accounted.

M&L for in repair of LT panel by replacement of the following items:- Note:- Panel shall be repaired by skilled technician having good knowledge of panel.

Copper cable PVC single core unarmoured unsheathed of size 25 Sqmm.

Copper cable PVC single core unarmoured unsheathed of size 2.5 Sqmm.

CT, resin casted of current ratio 400/5 Amp, burden -15 VA, accuracy class 1.0

Phase indicator R,Y,B as per existing size and shape.

MCCB - 125 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic protection / setting, Ics=100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In

MCCB - 250 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic protection/setting, Ics=100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In

MCCB - 400 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic protection/setting, Ics=100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In

Electronic timer-minilac

Terminal plate 06 Nos

Single Phase preventer

Copper lugs, thimbels, bottel lugssize of 25 Sqm

Contactor 25 Amps as per existing

Relay suitable for starter 10 to 15 HP-Minilac

Supply, installation, testing & commissioning of granular chlorination (Calcium Hypochlorite) dosing pump in replacement, high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD and adjustable high pressure of up to 100 PSI with accessories including lead, tubing, connecting nuts, ferrules, injection check valve etc and supply & fix calcium hypochlorite dosing system in replacement 100 Ltr. FRP tank with lid & level guage along with agitator and shaft & blade in plastic mounted on tank. Agitator motor with specification - voltage input-230V, single phase, 50 Hz, 900 RPM complete all as specified and directed.

Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with PVC pipe laid in bridge with the help of saddles of suitable size alongwith nut bolts complete all as specified and directed.

S&F in replacement MCB Triple pole & neutral, 415 Volts, 63 Amp complete all as specified and directed.

S&F in replacement PVC cables copper conductor insulated and unsheathed multistranded single core of size 70 sqmm 1100 V including copper lugs complete all as specified and directed.

S&F in replacement PVC cables copper conductor insulated and unsheathed multistranded single core of size 50 sqmm 1100 V including copper lugs complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair bollard light fittings 1 x 9 W LED comprising of integral luminaire type BGBOM 650 with opal acrylic and IP65 protection including fix on PCC block 30x30x30 cm including connecting up with suitable size of copper conductor cable from junction box complete all as specified and directed.

S&F in replacement of PVC moulded junction box with front openable hinged type door and locking arrangement with provision of cable inlet and outlet opening at bottom fixed to base outdoor type weather proof with 02 Nos of aluminium bus bar current capacity 10 Amps fixed on procelain insulated and 01 Nos of 2.5 Amps and one earth duly embedded in junction box for out going street light including nuts, bolts, glands, and lugs etc. complete all as specified and directed.

Supply & laying in replacement cable, 1100 volts grade heavy duty with XLPE insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 120 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size all as specified and as directed.

S&F in replacement of MCCB 4 pole 800 Amps, 415 volts, 70 KA rupturing capacity with adjustable thermal & magnatic setting complete all as specified and directed.

Supply and laying new electrical insulation rubber matting as per ISI and size 1mtrx 2mtr x 19mm suitable for electric installations/ panel boards tested suitable complete all as specified and directed.

S&F in repair Contactor 95 Amp 3 Pole 415 Volt complete all as specified and directed.

S&F in repair Contactor 80 Amp 3 Pole 415 Volt complete all as specified and directed.

Supply, installation, testing and commissioning of pumping header made of (approx length 7 mtr) with 150 mm bore MS flanged pipe, Heavy grade comparising the following :- (i) Provision of 4 Nos outgoing distribution feeder / by pass pipe feeder suitable for 80/100 mm bore MS pipe including all fitting including Provn of suitable size sluice valves (ii) PCC foundation in CM 1:2:4 type B-2 using 20 mm graded aggregate for support of header pipe as per manufacturer specification. Note:-Sluice valve of any size required to be fixed in Header will be measure and paid separately. Note:- Distribution /Bypass pipe lines 100 mm will be measured and paid separately under respective items from header.

Supply, installation jointing and testing including welding and any type of fitting required to make a joint in replacement MS Galvanized Pipe heavy class of size 80 mm thickness 4 mm dia with all fittings all as specified and as directed.

Supply, installation jointing and testing including welding and any type of fitting required to make a joint in replacement MS Galvanized Pipe heavy class of size 100 mm bore thickness 6 mmwith all fittings all as specified and as directed.

Supply, installation, jointing and testing including welding and any type of fitting required to make a joint in replacement MS Galvanised Pipe heavy class of size 150 mm bore thickness 6 mm with all fittings all as specified and as directed.

Supply, installation, testing and commissioning of pumping header made of (approx length 7 mtr) with 400 mm bore MS flanged pipe,Heavy grade comparising the following :- (i) Provision of 5 Nos outgoing distribution feeder/by pass pipe feeder suitable for 200 mm bore and 06 Nos 100 mm incoming MS pipe including all fitting including Provn of suitable size sluice valves (ii) PCC foundation in CM 1:2:4 type B-2 using 20 mm graded aggregate for support of header pipe as per manufacturer specification. Note:-Sluice valve of any size required to be fixed in Header will be measure and paid separately. Note:- Distribution /Bypass pipe lines 100 mm will be measured and paid separately under respective items from header.

Supply and fix MS Pipe 400 mm Flanged ends Heavy class IS 1239 including flanged in replcement all as specified and directed.

Supply, installation and testing in replacement Sluice valve PN 1.6 200 mm dia as per IS 14846 alongwith nut bolts packing rubber sheet iron wheel handle all as specified and directed.

Supply, installation and testing in replacement Sluice valve PN 1.6 100 mm dia as per IS 14846 alongwith nut bolts packing rubber sheet iron wheel handle all as specified and directed.

Supply, installation and testing in replacement Sluice valve PN 1.6 150 mm dia as per IS 14846 alongwith nut bolts packing rubber sheet iron wheel handle all as specified and directed.

M&L construction of old damaged brick masonry valve pit / chamber of size 1050mm x 1050mm x 1050mm (internal dimensions of chamber) using 50% new bricks built in one brick thick wall in cement mortar 1:4) including top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 x 40 x 6mm with locking arrangement, lifting handle and 02 Nos 100mm size MS butt hinges including painting two coats of black synthetic enamel paint over a coat of red oxide primer, 15mm thick plastering in cement mortar (1:4) (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr, 15 cm thick PCC (1:4:8) type D-2 in foundation projected by 15cm all round from the outer face of brick wall, PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick in coping complete all as specified and directed.

M & L for lifting fallen submersible pump and motor upto 15 HP alongwith Column pipe upto 150 mm from deep borewell approx 60 mtr height with the help of stud tripod, gantry crane, hooks, shackles without damaging the existing borewell casing and submersible pump and motor alongwith column pipe all as specified and directed.

Supply and fix Single phase motor 2780 RPM of capacity 0.75KW/1.00HP, pressure booster pump rated discharge approx 1500 LPH at rated head 40 m suction discharge of pump 25x25 mm alongwith Pressure tank of capacity 24 litre all as complete all as specified and directed.

Supply, install and testing in replacement submersible pump motor copper winding 11KW/15 HP @1500 LPM at 32 mtr head crompton Cat Part No. J3B15/J3B15-WX or equivalent in makes specified in Appendix 'B' all as directed and specified. Note: Old submersible pump will be deposited to AGE E/M Yard after removable.

Supply, install and testing in replcement submersible pump motor copper winding 7.5KW/10 HP @900LPM at 32 mtr head crompton Cat Part No. J2B10/JS2B10 or equivalent all as directed and specified. Note: Old submersible pump will be deposited to AGE E/M Yard after removable.

S&F in repair MNX Contactor 110 Amp 3 Pole 415 Volt complete all as specified and directed.

Supply & fixing in replacement of GI pipe heavy duty ISI marked of size 50mm dia,both end flanged including nuts & bolts packing sheet complete all as specified and directed.

Supplying, installing testing and commissionning indoor type LT Panel suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 micron provided with suitable gasket to make dust/vermin proof & general construction confirming to IS 80623/93 comprising of the following Outer shell :- The outer shell be made out of 2.00 mm thick CRCA sheet steel & MS angle section.

Inner shell :- Inner shell made out of 1.6 mm thick CRCA sheet duly compartmentalized for each control gear, front lockable/openable by keys from both sides having chromium plated 19 mm dia fancy lock (02 Nos in each neutral flow of air 'U' type completely vermin proof & to accomodate incomer/Outgoing MCCBs and TPN copper bus bar of rating not less than 1.5 times the rated capacity of the incomer MCCB. the coded heat , shrinkable sleeve and shall mounted on non hygroscopic, non combustible, track resistant, high strength FRP/SMC/DMC material at an interval not more than 250 mm throughout. The cubical incomer MCCB as well as outgoing steel have copper TPN extension links of current carrying capacity not less than 1.5 time the rated capacity of MCCB. with incoming and outgoing as under:

INCOMING :- (i) MCCB 125 Amp, 4 pole Icu 25 KA (Ics=Icu) 415 volts, 50 HZ with microprocessor release (S1 Type) adjustable between 40% to 100 % against overload setting - 01 No. (ii) Digital multifunctional meter, 3 phase 96x96 Sqmm suitable for voltage, Amp & frequency - 01 No.

OUTGOING:- (i) MCCB 63 Amp, 3 pole Icu 25 KA (Ics=Icu) 415 volts, 50 Hz thermally adjustable between between 70% to 100% -02 Nos. (ii) Digital voltmeter, 3 phase 96x96 sqmm suitable for voltaage range upto 500 V- 02 Nos (iii) Digital Ammeter 3 phase 96x96 sqmm suitable for range upto 100 amp with CTs ratia 100/5 amp- 02 set (iv) Electronic time switch self powered for street light with contractor of rating 100 amp, phase indicator LED type for on/off-02 Nos MoB SPN 32 amps 'C' series 02 nos and toggle switch for by pass arrangement (v) On/Off indicator lamp LED based with lamp holder and toggle switch -03 Nos (vi) Soft starter type PSS (Programming soft starter) AC 3 phase 415 volts 25 HP rated motor current 63 Amp module type of 380-415 volts with including motor protections all as specified and directed - 03 Nos (vii) MCB DP upto 16 amps cap -06 Nos (viii) MCB TPN 20 amps 415 volts -01 no (ix) Capacitor bank 10 KVAR capacity 01 Nos (x) Single phase preventor type VSP2- 02 No

ASHOK INFRATECH