SPECIAL REPAIR TO BLDG NO P 4 P 58 P60 AND T38 GUARD ROOM INCLUDING TOILET OF OUTRAM RD UNDER GE P NO 1 JABALPUR

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remaining serviceable tiles to stores and rubish off the premises complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L vetrified ceramic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

~ditto~ all as per Item No 8 above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.

M & L Non Skid ceramic joint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile over and includin 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed.

M&L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet)t in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

M&L for cement concrete 75mm thick type C-2 1:3:6 as in plinth protection complete as complete all as specified and directed.

M & L for Cement concrete type D-2 1:4:8 (using 20 mm graded aggregate) as in foundation filling and mass concrete , sub base complete all as specified and directed

M&L for vitrified paver color tiles 400 x 400 ,10 to 12 mm thick as in floor moulded set jointed and pointed in neat cement slurry with grey cement and pigment, to match the surface of tile over and includin 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement. complete all as specified and directed.

M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sandind of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute. (2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. (3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. as per manufacturer instructions apllied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and pattern directed.

M&L for prepareation of new internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.,over a coat of primer complete all as specified and directed

M&L for Complete removal of existing treatment and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats onold work.,over a coat of primer complete all as specified and directed.

Material & Labour for Complete removal of old/existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron colored) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete as per direction of Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification complete all as specified and directed

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F for wire gauge i.e. panel will be wire gauge in liew of double side prelam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings complete all as specified and directed.

S&F toughened glass 12mm thickas in hinged doors, partitions, automatic doors , stair case panels and similar work incl cutting to shape complete all as specified and directed.

S&F in framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w complete all as specified and directed.

S&F SS butt hinges100mm long medium weight, cold rolled complete all as specified and directed

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F in repair 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair 5.5 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each complete all as specified and directed

M&L for Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight upto 80 kg and fixed complete all as specified and directed

Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

Taking down chowket or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed.

Taking down Shutter exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed

S&F in repairs for Cupboars/Wardrobe of Factory made single extruded WPC (Wood Polymer Composite) 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed.

S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Circular Pipe, Sqaure pipe,I section,Beam, tee, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A) complete all as specified and directed

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter,fixed with self tapping screws complete all as specified and directed

M&L for Cudappah stone slab on platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and directed

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick cement mortar in 1:4 complete complete all as specified and directed.

M&L for brick work with flyash bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:6 as in half brick thick wall complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match complete all as specified and directed.”

M & L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work) and complete all as specified and directed.

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

M & L for two coat of distemper oil emulsion white or tinted over and including 2 mm thick putty on ceiling ovecomplete all as specified and directed.

M&L in repair Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket seat cover etc. (excluding flushing cistern & flush pipe) complete all as specified and directed.

S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed.

S&F 15 mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F 25 mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete complete all as specified and directed.

S&F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges including taking down the existing towel rail complete all as specified and directed

S&F Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .

M&L PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

S&F in repair 15mm dia long swan neck pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) cowl any radius complete all as specified and directed.

S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and directed

S&F for 75 mm dia PVC (SWR ) bends and radiuscomplete all as specified and directed.

S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleat complete all as specified and directed

Excavation in trenches n exc 1.5m wide n exc 1.5m deep in soft/loose soil complete all as specified and directed

Returning filling in incl spreading levelling watering and well rammmed in layers n exc 25cm complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.50m for soil complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes for 150 mm bore SWG pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Supplying, laying and jointing for 150-160mm nominal dia DWC pipes class SN-4 conforing to IS -16098:2013 Part-I stiffness with and incl necessary jointing materials complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Supply, laying, testing and commisiong on site LLDPE septic tank (Horizontal/Verticle) designed for 50 Users / tank capacity 5000 Liters approx as per manufacturer pluse to carry sewage and sullage water including excavation & eartwork in any type of soil, PCC 1:4:8 as in foundation, Vent shaft, connection etc.as per manufacturer instruction complete all as specified and directed. Make: SINTEX / DRISHTI TRADING/BHART BIO TECH

M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 M x 3.0 M depth complete all as specified and shown on drawing. TD Drawing No. CEJZ/TD/58 dt 05.05.2000 Sheet No. 1/1.

S&F aluminium anodised alloy curtain rails 20mm dia fixing with brackets, stops, rollers khob lattu etc. complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD. Complete all as specified and directed. NOTE :-Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work

M&L PCC 1:2:4 type B1 using 40 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed.

M & L for apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface complete all as specified and directed.

M & L for APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm laid on primed surfaces by torch application on method complete all as specified and directed.

M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to factory store and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including min 1 mm thick sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and cutting grooves on the wall surface incl making good disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light and fan points complete all as specified and directed.

(a) One light point/fan point controlled by one switch. Complete all as specified and directed.

(b) One switch socket combination out let 5 Amps on independent board. Complete all as specified and directed.

(C) One socket out let 5 Amps on the same board with other switches. Complete all as specified and directed.

~ditto~ all as per item No 110 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board. Complete all as specified and directed.

Supply & Fixing Modular type Switch single pole 16 Amps one way complete all as specified and directed.

Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps complete all as specified and directed.

Supply & Fixing Modular type Socket out let 5 Amps complete all as specified and directed.

Supply and fixing Fan step type electronic Regulator modular type, 120 watts, 230 Volt complete all as specified and directed.

Supply & Fixing Modular type Switch single pole 5 Amps one way complete all as specified and directed.

Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals complete all as specified and directed.

Taking down ceiling fan/Exhaust Fan, any type/size, after disconecting sealing cable end, dismantling blades and removing fan and blades to factory store complete all as specified and directed.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed.

S&F Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete, complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing in repair Security lighting luminaire for use with LED lamps, of capacity not less than 35/36 Watts IP-65, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25/40 mm bore medium grade GI Pipe Bracket 1.5 mtr long bent to shape, fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as specified and directed.

Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed.

Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 10 watt, natural white, 1000 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..

Taking down Old un serviceable DB/Switch fuses complete with all accessories, any type/capacity complete, after disconecting cable connection, and remove to factory store complete all as specified and directed.

S&F in replacement of sheet steel enclosure distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 12 way, SPN, double door type, 240 Volt with suitable amps rated busbar complete all as specified and directed. (Note : MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SPN, double door type, 240 Volt with suitable amps rated busbar complete all as specified and directed. (Note : MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, SPN, double door type, 240 Volt with suitable rated busbar complete all as specified and directed. (Note : MCBs will be Measured separately)

Supply and Fixing MCCB, four pole,63 Amp, 415 Volt, of breaking capacity 16KA complete all as specified and directed.

Supply and Fixing MCB, SPN, 230 Volt of capacity 6- 32 Amps, 10 KA 'C' series complete all as specified and directed.

Supply and Fixing MCB, SP, 230 Volt of capacity upto 32 Amps , 10 KA 'C' series complete all as specified and directed.

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLSH, cable with copper conductor of size 6 Sq mm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. (Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLSH, cable with copper conductor of size4 Sq mm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. (Note :- 2x 4 Sq mm conductor cable, 1 x 4 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLSH, cable with copper conductor of size 10 Sq mm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. (Note :- 2x 10Sq mm conductor cable, 1 x 10 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length) complete all as specified and directed.

Taking down sub main wiring any size of two single core aluminium/ copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ ceiling etc., complete all as specified and directed.

Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion complete all as specified and directed. Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate.

Taking down carefully storage type water heaters (Geyser) of any type and make of capacity upto 50 Ltrs, after disconnecting their electrical and water connections. De-scaling the inner container, heating element, base assembly using diluted hydrochloric acid and cleaning thoroughly. Filling the inner container with water and detecting leakage including brazing as required to stop the leakage, if any, reassembling the geysers after replacing the un-serviceable spare parts, filling water and testing the geysers by applying pressure by means of hand/foot operated pump, to ensure leak proof. Refixing geyser in the same original position/location and making the electrical/water supply connections incl testing on completion complete all as specified and directed. Note : Defective Items required to be replaced shall be measured and paid separately under relevent items of the Schedule.

Supply only Thermostat suitable for Geyser 25/35/50 ltr complete all as specified and directed.

Supply only Geyser Element 1000/1500 Watt of any type complete all as specified and directed..

Supply only Geyser connection pipe 12/18'' long with sockets in both end, made of steel complete all as specified and directed.

Schedule of credit of Amount Rs.38,779.00 to be deducted during AOC.

Please Enable Macros to View BoQ information