Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹44.4 L+₹2.5 L (5.99%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹52.8 L+₹10.9 L (26.1%)Rejected-Finance | L3 | Rejected-Finance Being 3rd lowest |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
11 Jan 2020, 6:00 pmClosed
Garrison Engineer I (P) Fy Kirkee
8, ENGINE HOUSE ROAD, ORDNANCE ESTATE, KIRKEE, PUNE-411003
DEMOLITION AND CONSTRUCTION OF BLDG No. 148 OF F2 SECTION FOR STORAGE OF X RAY FILM INSIDE FACTORY AT AFK
2019_MES_270532_3
8579
Open Tender
Civil Works
Lump-sum
270 days
Kirkee
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer I (P) Fy Kirkee
₹82,000
Yes
7 Feb 2020
26 Dec 2019
18 Jan 2020
26 Dec 2019
11 Jan 2020
26 Dec 2019
Amount
NOTE: Schedule ‘A’ Part I to VI are Prepriced by MES. Bidders shall insert their lumpsum amount in the blue coloured field under Col-7 only.
Lump sum amount worked out by the contractor for Building as listed in Sch 'A' Part-I inserted by MES in Sch A Part I on page 24
Lump sum amount worked out by the contractor for Excavation/Earthwork as listed in Sch 'A' Part-II inserted by MES in Sch A Part II on page 25
Lump sum amount worked out by the contractor for Internal Electrification as listed in Sch 'A' Part-III inserted by MES in Sch A Part III on page 26
Lump sum amount worked out by the contractor for External Electric Supply as listed in Sch 'A' Part-IV inserted by MES in Sch A Part IV on page 27
Lump sum amount worked out by the contractor for Lightening Protection as listed in Sch 'A' Part-V inserted by MES in Sch A Part V on page 28
Lump sum amount worked out by the contractor for Demolition/Dismantling as listed in Sch 'A' Part-VI inserted by MES in Sch A Part VI on page 29
SCH 'A PART VII (Miscllaneous E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only
S&F channel suitable for single 4 feet LED lamp with high efficiency LED linear lamp with high brightness 2x20 watts, 230 volts with control gear and all accessories complete all as specified and directed. Make:Wipro LED batten cat no - WIO 921208, Wipro LED lamp cat no - LL13-181-65SE or equivalent in makes listed in particular specififcations
S&F security light fittings on Pole/Wall for use with LED lamps, 40 watts, 240 Volt, 5700K, with high quality lenses & reflector, 240 Volt, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, with high power led as a light source complete with control gear and accessories, including 25mm bore dia of GI pipe light grade for fixing the fittings of length 1.5m and MS clamps, screws for fixing arrangement all as specified and directed. Make : Wipro cat no - LR02-451 or equivalent in makes listed in particular specifications.
Supply and fix MCB TPN 440 volt 63 amp 10KA complete all as specified and as directed.
Supply and fix MCB SPN 240 volt 5 to 32 amp 10KA complete all as specified and as directed.
Supply and fix MCB single pole 240 volt 5-32 amps 10 KA, complete all as specified and as directed.
Material & Labour for providing earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanized iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBs including necessary earthwork and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion. NOTE Rate quoted shall be deemed to include for 7.5m lead wire and protection pipe
Supply & fix Epoxy base insulator of size 40mm height fixed on wall /PCC block/on floor /on MS angle towers etc all as specified and directed
Supply and fix mild steel base plate of size 300mmx300mmx8mm thick with welded GI pipe 40mm dia and fixed in concrete with 04 nos m.s.foundation bolts with nuts washer etc all as specified and directed
JP ENTERPRISES
SUJATA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .