41(W)/EDCH/2024-25

Amount

FOR STRENGTHENING OF 33 KV GARH Ist FEEDER, EMANETING FROM 220 KV SUB-STATION SIMBHAOLI, IN BUSSINESS PLAN FY 2024-25 (PART-2), IN THE JURISDICTION OF EDD-GARHMUKTESHWER, UNDER EDC., HAPUR. (Third party inspection of the quality of all works will be conducted by the department.)

Carriage of all petty material with Dog Conductor of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of ST Pole 13/11 mtrs. long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of 11KV XLPE Cable 3x300sqmm, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Erection & Fixing of STP Pole 13/11 mtr. long in 33 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing as X-Arm-1No., Pin Insulator-03No., F-Bracket-1 No. and Cross Arm Holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge. (all necessury Clamp, nuts & bolts will be provided by the Contractor).

Laying of 140mm HDPE pipe, for laying of underground 33 KV XLPE Cable as per RESPO/Norms, including cost of above HDPE pipe. Work included Laying of trenchless 33KV XLPE Cable 3x300 Sqmm undergound (Single Circuit 150 mtrs) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms. (Only XLPE Cable will provided by the department).

Providing and fixing of G.I.Pipe 6"dia Class-B (4MtrsX2Nos.=08Mtrs.) over 33KV 3x300 Sq.mm. XLPE Cable laid in double circuit before mounting the cable at double pole. The work includes fitting of Clamps, sealing of top and bottom of pipe and one end of pipe is to be buried under earth about 500 mm each including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends.

Making and filling of 33 KV Cable Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge.

Laying, Stringing and final sagging of ACSR Dog Conductor, as per RESPO/Drawing Norms and as per direction of site incharge.

Grouting & fixing of stay rod,(20x1500mm) for 33 KV fastening the stay wire to the support including end making and tightening the G.S. stay wire and fastening to the Anchor as per RESPO Drawing/Norms by providing Stay Clamp made of M.S. Flat size 50x6 mm with proper size nuts & bolts and Stay Insulator. work including cost of all grouting material for making block 450x450 mm from cement, sand brick ballast in ratio 1: 3 : 6 will be provided by the contractor.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge. (Only Earth rod and GI Wire will be proveded by the Department.)

Grouting of STP supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Wrapping of barbed wire on 11KV ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts, barbed wire and all other required material and T&P., as per direction of site incharge.

Fabrication of Guarding Angle and Clamp & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge. (Only grouting angle & GI Wire will be provided by the department).

Painting of 11/13 mtr. STP following supports, including Channel, X-Arm, Clamps etc. with 02 coats of synthetic enamel paint/aluminum paint, with one coat of primer red oxide paint including cost of all required material providing by contractor, labour and T&P.

Providing & Fixing of Stone Pad at the bottom STP during errection as per RESPO/Drawing Norms and as per direction of site incharge.

Providing & fixing of Cross Arm Holding Clamp 33 KV with proper size nuts & bolts on existin pole.

Providing & fixing of F-Bracket for 33 KV with proper size nuts & bolts on existin pole.

Providing & fixing of MS Holding Clamp for 33 KV with proper size nuts & bolts on existin pole.

Providing & fixing of All Type proper size nuts & bolts on existing pole.

Fixing of 33 KV Pin Insulator with proper size nuts & bolts on existing pole necesaury clamp nuts & bolts will be provided by the department.

Fixing of 33 KV Disc Insulator with Fitting with proper size nuts & bolts on existing pole.

Fixing of MS Channel on Double Pole & Four Pole with proper size nuts & bolts on existing pole necesaury nuts & bolts will be provided by the department.

Fixing of Bracing Angle on Double Pole & Four Pole with proper size nuts & bolts on existin pole. (Only Bracing angle will be provided by the department).

Removed of old & used (damaged) ACSR Dog Conductor from site of work & bundling the same.

Safely dismantling work properly and carriage of old & used STP from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Removal of 33 KV Cross Arm scrap from existing pole

Carriage of old & used ACSR Dog Conductor & MS scrap from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Jumpering and line energisation work properly as per RESPO/Norms and as per direction of site incharge.

D S CONTRACTOR (BID ID -4728555)

DUSHYANT ENTERPRISES (BID ID -4727658)