PROVISION OF TOILET COMPLEX FOR SARV DHARMA STHAL UNDER AGE(I) CIF(U) REASI

Amount

SCH 'A' Part-I (B/R work):- Surface dressing n exc 15 cm deep in any type of soil, complete, all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, n.exc 10sqm on plan and getting out, complete, all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete , complete, all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete, all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete, all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete, all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, flat rough finished surface of concrete, complete, all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, and similar work, vertical or to batter, flat rough finished surface of concrete, complete, all as specified and directed.

M&L TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia, complete, all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick/concrete on wall surfaces in cement mortar 1:4 and finished even and smooth without using extra cement and applying two coats of cement base paint over a coat of primer after preparation, complete, all as specified and directed.

M&L 10 mm thick rendering on other than fair faces of brick wall surfaces in cement mortar 1:6 and finished even and smooth without using extra cement and applying three coats of white wash after preparation, complete, all as specified and directed.

M&L hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete, all as specified and directed.

M&L for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in floor/sub-base and finished even and fair, complete, all as specified and directed.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair, complete, all as specified and directed.

M&L Non-skid coloured ceramic jointless tiles (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed in CM 1:6, complete, all as specified and directed.

M&L glazed ceramic coloured tiles (designer pattern, HL ) of size 350 x 250mm x 7mm, 10 mm thick, as in skirting/dados or any vetical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick rendering in CM 1:4, complete, all as specified and directed. Make: Kajaria (Crema Glossy) or equivalent make as approved by Engineer-In-Charge.

M&L rolled mild steel as in roof trusses (framed) trussed, purlins, crane gantries, rail,and fastening and heavy brackets framing (Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E250) quality-A, complete, all as specified and directed.

M&L preparation of newly plastered surfaces of any description over 10 cms width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer, complete, all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete, all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing as per SSR-II 2020, complete, all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing of MES SSR-2020 Part-II, complete, all as specified and directed.

S&F mild steel cold rolled butt hinges medium weight 100 mm long, complete, all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete, all as specified and directed.

S&F aluminium alloy, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S&F aluminum handles cast type, anodised, 150 mm size, complete, all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete, all as specified and directed.

S&F steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron including box type hinges with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer, all as specified and directed.

S&F galvanised mild steel wire cloth having 0.56 mm nominal dia of wire and average width of appreature 1.00 mm, complete, all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete, all as specified and directed.

M&L Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete, all as specified and directed.

M&L steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete, all as specified and directed.

M&L steel water tubing of nominal bore 25 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete, all as specified and directed.

S&F 15mm Cromium plated bib taps, cast copper alloy with crutch or butterfly handle with wall flange & aerator, long body, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified and directed.

S&F Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, rocket type with aerator, screwed down, high pressure with or without lettered, 'hot' or 'cold', with long screwed shank and fly nuts, screwed for iron pipe and fixed for 15mm bore of pipe, complete, all as specified and directed. Make : Essco Marvel series or equivalent

S&F CI floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1, complete, all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius, complete, all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete, all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete, all as specified and directed.

S&F 110 mm bore PVC (SWR) junction (single T) equal or unequal with acess door, complete, all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed.

M&L vitreous China wash basin, white, flat back, size 580x450mm including brackets with long padestal, 32 mm waste coupling brass chromium plated with long screwed shanks, fly-nuts, including cutting for and pining ends of brackets or erecting stand, complete, all as specified and directed.

S&F vitreous china urinal, white, spraeder, flush pipe and waste pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, grating and union for discharge pipe. , complete, all as specified and directed. Make: Parry ware New Magnum with Spreader

S&F vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe, complete, all as specified and directed.

S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete, all as specified and directed.

S&F PVC connections suitable for 15mm bore with nuts of length 600mm each (superior quality) complete as specified and as directed by Engineer-in-Charge.

S&F grating doom 100mm dia square or round of PTMT (minimum weight 25 gm), complete, all as specified and directed.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories, complete, all as specified and directed.

S&F ball brass valves 20mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete, all as specified and directed.

S&F Soap dish, vitreous china white approximate sixe 160x160x90mm, fixed to plugs with chromium plated brass screws, complete, all as specified and directed.

Supply only integral water proofing compound, complete, all as specified and directed.

S&F 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minium weight 15mm- 90 gms), complete, all as specified and directed.

S&F toilet paer holder, vitreous China coloured, box typefixed to walls with chromium plated (CP) brass screws, complete, all as specified and directed.

S&F hand shower (Health Faucet), 1 meter long crome finish flexible tube with wall hook with NRV (back flow preventer), complete, all as specified and directed. Make : Jaguar Cat part No. ALD-CHR-583 or equivalent.

S&F PVC (SWR) vent cowl 110 mm bore, complete, all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete, all as specified and directed.

M&L Gl frame work for seamless ceiling of grid size 605mmx605mm) comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete, all as specified and directed.

S&F fiber board 07mm thick of size 60 cm x 60cm with front side designed PVC sheet laimation and rear side with aluminium foil laid on GI snap grid in ceiling, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 25m and making good surface, complete, all as specified and directed.

M&L Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete, all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in hardstanding, complete, all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; ailings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed.

S&F towel rail 600mm long of PTMT fixed with including chromium plated brass screws and plastic cleats, complete all as specified and directed. Make : Jaquar Cat Part No AQN-7711 or equivalent

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete, all as specified and directed.

M&L providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in floor/sub-base and finished even and fair, complete, all as specified and directed.

M&L Machine pressed precast conctete prelaminated rubberised coloured interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set jointed and laid with grey cement and pigment, complete, all as specified and directed.

Sand filling under floors or in foundation or for laying floor finishes including watering and consolidation, complete, all as specified and directed.

M&L Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form works, complete, all as specified and directed.

M&L concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete, all as specified and directed. Note:- (i) Thickness of bed below barrel of pipe -10 cm. (ii) Width of bed :- 15 cm beyond either side of the pipe.

M&L Salt glazed stone ware drain pipes of internal diameter 150 mm grade 'A' laid in trenches and jointed , complete, all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete, all as specified and directed.

M&L 15 mm thick rendering on other than fair faces of brick/stone masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement mixed with integral water proofing compound as per manufacturer's instructions, complete, all as specified and directed. Note:- WPC will measured and paid seperately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete, all as specified and directed.

M&L cutting into existing manholes for connecting new drains, making good to pipe 150mm dia and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-1, smooth finished and reforming benching as required, complete, all as specified and directed.

M&L cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in surface channels and drains, complete, all as specified and directed.

M&L Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6, complete, all as specified and directed.

SCH 'A' Part-II (E/M work):- M&L for point wiring for one light / fan point controlled by one, single pole, one way switch, 5 amps with 1.5 sqmm, PVC insulated but unsheathed, multi stranded copper conductor FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 19/20mm dia or higher 1.5mm thick complete with all PVC conduit accessories / fittings ISI marked and sunk type pressed steel terminal switch boxes 1.5 mm thick duly painted with black bituminous paint over one coat of red oxide primer with plastic laminated sheet top cover 3mm thick make hylam, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continuous earth conductor to common earth and connected to earth dolly with all accessories , complete, all as specified and directed.

All as per item No 1 but one 3/5 pin 5 Amp socket outlet on same board.

S&F switch piano 5A flush button type single pole one way, complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block, complete, all as specified and directed.

S&F Switch socket combination 2 in 1, 3/5 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps, 'B' curve, 10KA, 240V, complete all as specified and directed.

S&F MCB single pole 40 Amps, 'B' curve, 10KA, 240V, complete all as specified and directed.

S&F sheet metal enclosure for DBs double door when MCBs to be used Single pole and neutral with 200 amps rated bus bar 240 V 4 way, complete all as specified and directed.

S&F 1x10W LED batten(1.2m) made from CRCA sheet housing prewired with PC glossy diffuser, driver and all mounting accessories, havinf nominal system lumen output of 2000 lumens, system efficiency of 105 lumens per watt and toatal power conjumption not more than 22 watt, complete all as specified and directed. Make Havells Cat part No Endura Linear Neo BS22WLED830S PCWH or equivalent make.

S&F 1 X 10 w LED bulk head luminaries, IP 65 LED Bulk Head in engineering plastic housing with clear prismatic diffuser with lamp holders , etc. Complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ, complete all as specified and directed. Make :-C&S e-TARTA Series Cat Part No e-TARTA/10 watt CG801B10WLED White or equivalent in Bajaj/Havells/CG.

S&F Exhaust Fan 300mm sweep AC single Phase 230/240V, 900 RPM, complete all as specified and directed. Make :-Havells Model turbo force SP or equivalent in Bajaj/CG/USHA as approved.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in soft loose soil/strata for laying of cable, GI pipe and getting out, complete, all as specified and directed.

M&L for dry sand cushioning to under ground cable 8cm thick before laying the cable and 15cm thick after laying the streching the cable in trenches, including hand punning and consolidatingcomplete, all as specified and directed. Note : for payment purpose punned thickness shall be measured.

M&L for sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete, all as specified and directed.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strips or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 10 sqmm 2 core, complete all as specified and directed.

S&F steel tubing of nominal bore 25 mm, medium grade galvanised, fixed to walls, concealed in wall and ceiling or laid in floor or road crossing complete with all fittings, complete, all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground, (earth pit not less than 1.5m below normal ground level), with top edge of plate not less than 1.5M below normal ground level, connected to and including galvanised earth wire 4mm dia by means of nut, bolt, check nuts and washers of galvanised iron or steel as shown on electrical plate No. 03 of SSR Part-I (2009). complete all as specified and directed including testing on completion including following:- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Precast RCC cover in cement concrete 1:2:4 type B-1with suitable handle, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (c) Funnel with watering pipe of GI 20mm nominal bore light grade and lugs etc . (d) 15mm nolinal bore medium grade GI protection pipe 5M long for protection of earthing lead. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing on completion as directed.

S&F Steel water tubing of nominal bore 50 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) , complete, all as specified and directed.

S&F in replacement stop valve 25 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

M&L Cutting and screrwing existing 50mm bore GI tubing for alterations or additions (or lengthening screw on pipe to form connector) without taking down GI pipe (each cut measured), complete, all as specified and directed.

R C TRADERS

M/S THAPPA TRADERS