Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹80.2 Laccepted-aoc | accepted-aoc |
Tender Value
₹94.9 L
EMD Value
₹1.9 L
Closing Date
17 Jun 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Prakash
Protection works to chakra exit channel around chainage-3400m
KPCL/2025-26/DA/WORK_INDENT2899
KPCL/2025-26/DA/WORK_INDENT2899
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KPCL Executive Engineer CIVIL Office SVP Mastikatte
3 documents required · 3 mandatory
Satisfactorily completed (at least 90% of the contract value) as a prime contractor at least one Civil Construction Work of value not less than Rs.47.46 Lakhs during the preceding five financial years. The past experience should be supported by original scanned copy of the Work done certificate issued from state/central Government/Government under taking from the officers not below the rank of Executive Engineer. (Work done of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)
The intending bidder should have executed in any one financial year in the last five financial years i.e., 2020-21 to 2024-25 for following minimum quantity of work. a)Providing and laying in RCC -273 cum b)Supplying, fitting and placing TMT Steel Reinforcement- 17 tonne.
Tender capacity - (A X N X 2.5-B), where, A-Maximum value of works executed in any one year during the last five years (updated to 2025-26 price level)taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited for 0.5 years. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 0.5 years(period of completion of the works for which Tenders are invited)
Achieved in at least Two (02) financial years an average annual financial turnover Rs.94.91 Lakhs in the last 05 (Five) financial years.i.e., 2020-2021, 2021-22, 2022-23, 2023-24 and 2024-25. Turnover certificate, duly certified by chartered Accountant (along with UDIN No) shall be furnished. (Financial turnover of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)
Certificate of registration in KPWD Class III & above.
Liquid assets and or availability of credit facilities of not less than Rs. 28.48 Lakhs (Credit lines / Letters of Credit / Certificates from Banks) for meeting the fund requirement.
GST registration certificate
PF Registration certificate (independent PF Code)
nil
nil
nil
nil
nil
nil
Income Tax PAN
₹2,380
₹1.9 L
17 Jun 2025
2 Jun 2025
18 Jun 2025
16 Jun 2025
Protection works to chakra exit channel around chainage-3400m
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out...
Removing and hauling muck overfallen due to natural causes such as geological faults out of tunnel including cost of all materials, machinery, labour, ventilation, drainage, lighting, breaking any lar...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete. ---- In accordance with f...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
Providing and laying in position plain cement concrete of Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/b...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
Steel Fabrication: Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/wel...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 75mm outer dia at 2 kg per m2, extending through the full width of the structure with sl...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Back filling behind abutment, wing wall and return wall with granular material complete including compaction as per drawing and Technical Specification. A. Granualr Material. ---- In accordance with f...
Providing and constructing sand layer vertical /inclined graded filter media using clean, hard graded sand from approved source satisfying specified filter creteria in layers of specified thickness in...
Providing and constructing 10 mm down graded coarse aggregate layer vertical /inclined graded filter media using clean, hard graded coarse aggregate from approved source satisfying specified filter cr...
Providing and constructing 40 mm down graded coarse aggregate layer vertical /inclined graded filter media using clean, hard graded coarse aggregate from approved source satisfying specified filter cr...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. A Stone/Bou...
Removing and resetting disturbed dry rubble / size stone pitching 250 to 450 mm thick including packing and wedging with stone chips, finishing surface with all other ancillary operations complete ---...
Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...
Carrying out Geotechnical Investigation for 3 pits to determine the SBC at the site and submission of final report including all machineries, labour, tools & plants, transportation etc., complete as p...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
format 1.docx
Others - Format-1 • 0.01 MB
Declaration.pdf
Others - Declaration • 0.07 MB
format 3.docx
Others - Format-3 • 0.01 MB
Bid document-KW-3-CWCS.docx
Tender Document • 2.74 MB
format 2.docx
Others - Format-2 • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .