SPECIAL REPAIR TO BOUNDARY WALL AT TECHNICAL AND RESIDENTIAL AREA AT CQA(I) RAIPUR DEHRADUN

Amount

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, sewage line, manholes n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified and directed.

Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and directed.

Removal of excavated soil exc 500m not exc 1Km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, foundation, filling, mass concrete complete all as specified and directed.

Providing PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate in coping and benching of Brick wall,drain etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintles over 1.5 m span complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

M&L for brickwork with sub class 'B' bricks of old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) but except bricks complete all as specified and directed.

M&L for broken glass coping on top of wall in cement mortar 1:3 complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Use and waste of formwork as in foundation, footings, padestals and in PBs complete complete all as specified and directed.

M&L for Use and waste of formwork as in Columns complete all as specified and directed.

S&F mild steel angle iron in fencing posts, and struts fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cut to length, benet to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in reinforecement Complete all as Specified and directed.

M&L for Mild steel bars TMT Bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as Specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.

S&F concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 complete all as specified and directed. Note:- Concertina coil having 50 Rounds per 6 RM.

Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 ,oiher than fair face of brickwork, finished fair and even without using extra cement complete all as specified and diected.

M&L for rendering 10 mm thick on brick wall or concrete surface in cement mortar 1:4 onfair face of brickwork, finished fair and even without using extra cement complete all as specified and diected.

M&L for Preparation of new plastered surfaces of walls and concrete work and applying two coats of cement based paint over a coat of Primer complete all as specified and directed.

M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and as directed.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and as directed.

Supply only PVC (SWR) pipes, single socketed in any length , 110 mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

Dismantling barbed wire fixing to any type of fencing posts,and removal of dismantling materials to a distance exceeding 500 M but not exceeding 1000mtr complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles,and removal of demolish materials to a distance exceeding 500 M but not exceeding 1000mtrcomplete all as specified and as directed.

Demolition of plain cement concrete ( Un reinforced)of any description in any position not otherwise specifically provied and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000mtr , complete all as specified and directed.

Demolition of (reinforced cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M/S Anil kumar

M/s RP AGRAWAL

Gaur Construction Co

OM TRADERS

JS CONSTRUCTION COMPANY

Gupta Brothers

M/S P K ARORA

ANEJA AND COMPANY