Repair and renovation of various Public Toilets of Sector 31, 47, 48, Indl. Area Ph-II, Chandigarh under the jurisdiction of SDE MCPH-9, Chandigarh.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by EIC (DSR No.17.16A)

Replacement of old/damaged seat cover of approved make including cost of not bolt etc. complete in all respects. (NSI)

Providing and fixing Grab rail of stainless steel pipe 1" dia. chrome platted stainless steel grab rail at Height of 2'-6" with minimum 2" clearance and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of EIC (NSI)

10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floor (DSR No.17.18.1)

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore (DSR No.18.21.1.1)

Providing and fixing PTMT angle stop cock 15mm nominal bore,weighing not less than 85gms Make: Prayag (DSR No.18.63)

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100mm with 1/2" BSP thread and shapes, weighing not less than 60gms.(DSR No.17.75)

Providing and fixing slab with table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) as per direction of Engineer-in- charge and finished smooth Granite Stone of approved shade. (DSR No.8,10.2)

Providing and fixing of CP - Soap Dispenser 138x102x75 mm (NSI)

Providing and fixing of CP - Soap Dish/Holder 138x102x75 mm (NSI)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (DSR No.17.32.2)

Providing and fixing PTMT bib cock of approved quality and colour 15 mm normal bore, 122 mm long weighing not less than 99 gms (DSR No.18.54.2)

P/F of LED Tubelights complete set type 20W ,L=4ft, Make : Havells/Philips/ Surya (NSI)

Repair and replacement of electric wiring points by replacing of modular switch/ shocket, Modular plates, with box including the cost of 1.5mm2 copper wire and labour complete (NSI)

Providing and fixing 50 watt LED flood light with bracket out side on the wall complete Make: Havells/ L&T (NSI)

Garbage Large Dust bin (plastic) 48liters (NSI)

Plastic Mug(1.5 litre) (NSI)

Providing and fixing of hand dryer at various Public Toilets Blocks i/c cost nut, bolt, freight charges complete in all respects. (NSI)

Repair of aluminium door with frame size 2.5'' x 6' along with refixing the horizontal/vertical rails ,new hinges towers bolt handle ,alumium beading and rubber gasket, Screw ,Labour and particle board etc complete in all respects (NSI)

Repair of aluminium door with frame size 3' x 6' along with refixing the horizontal/vertical rails ,new hinges towers bolt handle ,alumium beading and rubber gasket, Screw ,Labour and particle board etc complete in all respects (NSI)

Providing and fixing of P V C Water Storage Tank covers ISI Marked (NSI)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)(DSR No.4.1.4)

Dismantling kota stone flooring in cement motor including stacking serviceable material upto a lead of 50meters (NSI)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25mm thick (DSR No.11.26.1)

Replacement and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore (DSR No.18.18.2)

Proving and fixing of Laminated Sun Sign Board Material for indication of various sign board in Toilet Block of Size (i) 36”X30” (3'0''X2'6'') (NSI)

8”X12” (8''X12'') (NSI)

(Direction Boards) Size 9” X12” (NSI)

4’X1 1/2 ' (4'0''X1'6'') (NSI)

3' x 2' (3'0''X2'0'') (NSI)

Providing & fixing of Notice Board (1 1/2'x 1') (NSI)

Providing and laying vitrified floor tiles in different sizes (thickness to be\ specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.4 Size of Tile 1000x1000 mm (DSR No.11.41.4)

Providing and fixing of MS Hardware Kundi, handle, hinges, kabza including cost of nut bots and electric rods charges, generator set charges, welding and finishing with good quality paint (Two coats) complete in all respects. (NSI)

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :With F.P.S. brick tiles (DSR . No. 14.18.1)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR No. 12.21.1)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No. 12.22)

Providing and fixing of CP jali with cut including fixing with white cement etc. complete in all respects (NSI)

Providing and fixing of tissue paper dispensers in washbasin area as per direction of EIC (NSI)

Repair of sanitary pad vending machine complete in all respects (NSI)

Repair of sanitary pad incinerators machine complete in all respects (NSI)

Repair of Exhaust Fan including cost of replacement of defective parts etc. complete in all respects (NSI)

Repair of Hand dryer including cost of replacement of defective parts etc. complete in all respects(NSI)

Providing and fixing of MS direction/ sign board of rectangular size 457mmX305mm, 14 gauge thickness plate welded with stand post made of angel 25X25, height 4' including cost of cutting, freight charge applying a priming coat of approved steel primer, print and labour at various toilet blocks, written letters in white colour complete in all respects (NSI)

Repair of damaged existing Constructing brick masonary chamber for under ground C.I. inspection chamber including repair of damaged bricks, chamber walls , benching and cleaning of inspection chamber complete in all respects as per satisfaction of EIC. (NSI)

Providing and fixing PTMT pillar cock f approved quality and color 15 mm nominal bore 125 mm long foam flow not less than 120gms (DSR No.18.56.2)

Providing and fixing PVC Waste pipe for sink or wash basin i/c waste pvc waste fitting complete (DSR No. 17.28.1.1)

providing and fixing CP brass 32 mm size bottle trap of approved quality and make and as per direction of Engineer in charge (DSR NO.17.22A)

Replacement of damaged existing RCC MH cover & frame HD 20 Size 450 x450 mm for chamber ( DSR No.19.19.2.1)

Less against old material L.S.

Please Enable Macros to View BoQ information