Construction of anganwadi center-04 at Udagi village in Sedam Taluka (Continue Work) under Taluka Panchayat Anirbhandit Anudan for the year 2025-26

Construction of anganwadi center-04 to Udagi village in Sedam Taluka (Continue Work) under Taluka Panchayat Anirbhandit Anudan for the year 2025-26

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)with all lead, lifts, loading & unloading charges, cost and conveyance of all mater...

Providing Brick work with common burnt clay Non Modular bricks ofclass designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) incl...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Fixing of window frame in an existing opening including embedding frame

in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Flooring with 25mm thick polished shahabad slabs using cement mortar

1:6, 25mm thick over existing cement concrete bed or top of roof laid to

line and level and jointed with cement slurry mixed with p...

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 80mm wide top rail and stiles 100mm wide as per dr...

Providing and fixing in position Mathi / Nandi wood fully panelled shutters

for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materi...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials...

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. completewith all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equ...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.with all lead, lifts, loading & unloading charges, cost and conveyance of ...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Finishing walls with textured exterior paint of required shade :New work

(Two coats applied @ 3.28 L/10 m2) over and including priming coat of

exterior primer applied @ 2.20kg/10 m2 to give an even sh...

Applying priming coat: With ready mixed aluminium primer of approved

brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m2 over an under coat of primer applied

@0.75 L/10 m2 of approved brand and manufacture to give an eve...