Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.6 LAccepted-AOC PLOT NO 172 22 GALI NO 09 GANDHI NAGAR GURGAON 122001 | GURGAON | GURUGRAM | HARYANA | 122001 | 1 | Accepted-AOC Lowest Rate | |
| 2 | 2₹15.7 L+₹1.2 L (8.42%)Rejected-Finance VILLAGE DUMERKHA KALAN POST OFFICE DUMERKHA KALAN TEHSIL UCHANA DISTRICT JIND 126115 HARYANA | DUMERKHA KALAN | JIND | HARYANA | 126115 | 2 | Rejected-Finance Highest Rate | |
| 3 | Not Admitted-Fee/PreQual/Technical HOUSE NO 1310 SECTOR 4 URBAN ESTATE GURUGRAM 122001 | GURUGRAM | HARYANA | 122001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹33,700
Closing Date
19 Feb 2021, 5:00 pmClosed
Raman Yadav
Sector-34, Gurugram.
Providing and fixing of 9 Mtr Mini High Mast with Led Light 350 watt at ward 35 under limit of municipal corporation Gurgaon.
2021_HRY_159755_1
EE-EEELCT./MCG/2021/3939
Open Tender
Electrical Works
Works
90 days
Providing and fixing of 9 Mtr Mini High Mast with
Providing and fixing of 9 Mtr Mini High Mast with Led Light 350 watt at ward 35 under limit of municipal corporation Gurgaon.
2 documents required · 2 mandatory
₹1,000
₹33,700
9 Aug 2021
12 Feb 2021
20 Feb 2021
12 Feb 2021
19 Feb 2021
12 Feb 2021
Amount
Providing and fixing of 9 Mtr Mini High Mast with Led Light 350 watt at ward 35 under limit of municipal corporation Gurgaon.
Supply and erection of Decorative Mini High Mast Fixture Brix 350 watt IP-65, Total height of the GI pole is 9 meter lower part of the pole is having 140 mm dia with 4.3 mm thickness height 3meter. Base plate having 400*400*20mm thick elliptical shape service window having loop in loop our 4way connector 40 amp suitable for 10Sqmm wire with 6amp single pole MCB, middle part of the pole having 114mm dia with 4mm thickness height 3 meter. top part of the pole having 90mm dia with 3.7mm thickness height 3 meter. At the bottom of pole there is a cast iron base having dia 260mm and height of base is 220mm. decorative cast iron/aluminum casting are used at the joint of pole. Pole & decorative casting parts are PU panted in three layers coating in which 1st layer with ETCH primer, 2nd layer with EPOXY primer and 3rd final layer with PU paint, light fixture is made of cast aluminum housing having width of 700mm and height of the fixture is 270mm. light fixture is suitable for 350w(As per drawing). LED is mounted on MCPCB with single piece lens on 12 led. T2 lens is used for wide distribution of light fixture is IP65. including Hydra, labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make- Glowmac make model No.GL-A-BRIX-ESTILO, Philips, Crompton, Wipro
Cost of RCC 1:1.5:3 for foundation of size 700x700x1500mm include base 1200x1200x300 with with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4nos 8 mm dia manufacturing from special steel along with nuts, washers, anchor plate & template all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.
Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12''x15''x5'' duly lockable including Input and Out Put Connectors Bakelite/Porclein make- Siemens, Sintex of 63A Rating and neccessary service cable up to 10 mtr, complete with internal copper wiring and installing the same on pole/pedestal with suitable means at height desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog/Digital 24 Hour Operation (L&T/Siemens/Schnider) Contractor :- 3Pole 40A, 415Volt. (L&T/Siemens/Schnider) DPMCB :- 40A 2pole. (L&T/Siemens/Schnider)
Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe inlucidng supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road corssing of cable by Hydraulic Drilling Device withoug opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.
Bidder Name
Amount
DHEERAJ ENTERPRISES(GSTN-06AAKFD3784C1ZI)
Fortune Enterprises(GSTN-NA)
DHEERAJ ENTERPRISES
Fortune Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .