Shifting of line and Transformer of Level crossing No. 4 near Km. No. 838/7T To 838/8T between Bamrauli to Manauri Railway Station again Deposit Scheme on Semi Turn Key Basis under EUDD-Bamrauli, Prayagraj.

SUPPLY OF MATERIALS (Part-A)

G.I pipe 6" dia

Top channel 125x65x3200 mm

Top channel 100x50x2240 mm

U' BOLT

Service Clamp O/S

Disc Insulator (B&S Type)

Disc Fitting (B&S Type)

33 KV Pin Insulator

33 KV Pin With Nuts

Clamp for fixing pipe to pole

MS angle iron Cross Bracing with 4 no. clamp 65x65x6x4300mm

M.S. Earthing complete

MS Nut & Bolt

Stone Pad 300x300x75 mm

Stay Complete

Danger Board with complete

Number Plate

Barbed wire

Red Oxide Paint

Alu. Paint

HDPE pipe 6" dia

11 KV Pin Insulator

11 KV G.I. Pin

11 KV Disc. Insulator

11 KV Disc. Fitting

Danger Board with complete

Barbed wire

Number Plate

LT Cable Size 3.5x240 sq. mm XLPE

I-Hook

Dead End Clamp

Suspension Clamp

Piericing Connector 120 sq.mm.

Piericing Connector 90 sq.mm.

Distribution Boxes with accessories

M.S.Angle 50x50x6 MM 18''

L.T. Shackle Insulator

1x35 sq.mm. PVC cable

1x16 sq.mm. PVC cable

Dis Connection & reconnections Service

MS CHANNEL DROPPER 100X50X2600 MM

M.S.Angle 75x75x75x6x2028

EARTHING COMPLETE

MS CHANNEL DROPPER 100X50X2600 MM

11 KV D.O. FUSE SETS

D.D. WIRE

ALUMINIMUM LUG 70 SQMM

ALUMINIMUM LUG 120 SQMM

PVC TAPE

Danger Board with complete

Number Plate

CLAMP for 10 KVA T/F Fixing on pole

L.T. CABLE 3.5X70 SQ MM.

MOUNTING, FITTING & ERECTION OF WORK AS PER RESPO NORM. (Part-B)

Laying of single 33 KV 3x300 sq mm XLPE cable by machine drilling method. The cable shall be laid at the depth of 1050 mm from the surface of road.including supply of material like first class brick,stone pad & sand etc.

Drilling in all horizontally to cross the road, 1050 mm bellow from the surface for laying of HDPE Pipe and laying of 33 KV.3x300 sq m,m XLPE cable in 8'' dia HDPE Pipe.

Eerection, grouting, plinthing & earthings of 13 mtr Double/Section pole support with fixing of necessary clamps and other accessories like channel, insulator etc.grouting ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly.

Fixing of Heat Shrink cable type end Terminations suitable for 33 KV, 3x300 sq mm XLPE cable

Outdoor/indoor jointing kit

Hosting of 33 KV 3x300 sq.mm XLPE cable placing with G.I. pipe of size 6" dia 3 Mtr. Long on double pole/ single pole including its jumpering ,complete with clamp,nut&bolt.

Earthing of support complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod.

Fixing of marking stone for 33 KV U/G cable including supply of required

Fixing & Grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nuzzling.(Grounting and all material will be provided by the contractor)

Dismentling Charge of old 33Kv Lines,Cartage of New Material from store/Dump Store to work site & cartage of old dismentaled material from site to ESC, Prayagraj

Eerection, grouting, plinthing & earthings of 11 mtr section/double pole support with fixing of necessary clamps and other accessories like channel, insulator etc.grouting ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly.

Laying of single 11 KV 3x185 sq mm XLPE cable in normal soil by digging of trench with required norms size including supply of required material like first class brick, sotne pad & sand etc.

Drilling in all horizontally to cross the road, 900 mm bellow from the surface for laying of HDPE Pipe and laying of 11 KV.3x185/3x70 sq m,m XLPE cable in 8'' dia HDPE Pipe.

Cartage of 11 KV 3x185 sq.mm. cable including loading & unloading

Cartage of 11 Mtr. STP including loading & unloading

Cartage of other material ie. Stay, insulator, clamp, channel etc. including loading & unloading

Painting of STP incuding paints (1 ltr red oxide and 1 Ltr Alluminum Paint for each pole.)

Fixing of Heat Shrink cable type end Terminations suitable for 11 KV, 3x185 sq mm XLPE cable Outdoor jointing kit /Straight Through

Outdoor

Straight through

Hoisting of 11 KV 3x185 sq mm XLPE cable providing GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with clamps, nut & bolts.

Earthing of STP with the help of earthing rod and 6 SWG GI wire

Fixing of marking stone for 11 KV U/G cable including supply of required material

Dismantling and cartage

Erection, grouting, plinthing, earthing & painting of 11 mtr long sub station type D/P for mounting of T/Fs with all accessories like 11 kv fuse set, TPMO, top channel, grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly as per Resspo and Electrical Safety rule

Erection & commissioning of T/F 25 KVA on D.P. along with HT/LT connections with copper L-piece. Complete in all respect,as per Resspo and Electrical Safety rule

Erection & commissioning of T/F 10 KVA on D.P. along with HT/LT connections with copper L-piece. Complete in all respect,as per Resspo and Electrical Safety rule

Erection, grouting, plinthing, earthing & painting of single support pole 9 mtr long STP for LT line, including fixing of necessary clamps grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ratio 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting & plinthing and all required material will be arranged by the contractor except 9 mtr long STPas per Resspo and Electrical Safety rule)

Errection&Commissioning of (3x120+1x195+1x16) sq.mm ABC,necessary clamps, I-Hook, dead end clamp, suspension clamp,pierising connecter 1x35 sq.mm. & 1x16 sq.mm. PVC cable as per RESSPO norms will be arranged by the contractor exept AB cable and Weasel Conductor as per Resspo and Electrical Safety rule

Errection&Commissioning of ACSR Weasl for neutral conductor in LT AB line with fixing of LT X-arm, LT shackle insulator, clamps etc. at existing LT pole as per Resspo and Electrical Safety rule

Errection & Commissioning of distribution boxes/kiosk on the LT poles including all clamps & materials required, connections & sealing its connection in between Distribution Box & ABC 1x35 sq. mm LT PVC cable (all required Local materials including Distribution box arranged by the contractor as per Resspo and Electrical Safety rule)

Earthing of support complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod. (All material will be arranged by the contractor as per Resspo and Electrical Safety rule)

Fixing & Grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nuzzling.(Grounting and all material will be provided by the contractor)

Laying of single L.T Cable 3.5x240 sq mm XLPE cable by manual drilling method. The cable shall be laid at the depth of 900 mm from the surface of road. The cable shall be laid strictly in compliance to RESSPO Norms . (The rates must be quoted for each cable of length per mtr.)

Opening of consumer connecting/service line from old line and Re-connection the same on new line

Single phase

Dismantling and cartage

M/S VINAYAK ASSOCIATE

Shiv Enterprises

M/s A.E. Enterprises

M/S Ajay Tripathi

D N S ENTERPRISES

RAKESH ELECTRIC WORKS,ECID

Dinesh Traders