fabrication installation testing and commissioning of 3 Nos new gates at various locations

fabrication installation testing and commissioning of 3 Nos. new gates at various locations.

Escape gate at Khandwal (1meter x 1meter) Fabrication of gate leaf frame of size (1 meter X 1 meter ) (approx) using the ISMC channel of 75X40 MM size with requisite no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Job includes fabrication providing and fitting of hoisting channel-02 no with anchoring it with 2 no bolts on each side .fitting of guide channels of MS Channel 100x50 mm of approx length 2 meter and proper anchoring in the PCC. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on new fitted top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Job includes cleaning of side channels and proper oililng/greasing. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. Connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges, excavation and testing for its smooth operation at site.

Cross Gate of khandwal (1 meter x 1 meter ) .Fabrication of gate leaf frame of size (1 meter X 1 meter ) (approx) using the ISMC channel of 75X40 MM size with requisite no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Job includes fabrication providing and fitting of hoisting channel-02 no with anchoring it with 2 no bolts on each side .fitting of guide channels of MS Channel 100x50 mm of approx length 2 meter and proper anchoring in the PCC. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on new fitted top hoisting channels , L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Job includes cleaning of side channels and proper oiling/greasing. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. Connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges, excavation and testing for its smooth operation at site

Gate of Distributory Saharan Khul at Gajanso Marh of size (4’6”X 6’-2”)ft Fabrication of new gate leaf frame of size (4’6”X 6’-2”) ft using ISMC channel of 75X40 mm size with requisite no. of cross members for proper support and outside frame of ISMC channel of requisite size for supporting smooth vertical movement of gate leaf by way of cutting/welding using superior quality electrodes. Job includes dismantling of winch machine from its installed position and then extraction of gate by means of chain pulley block, tripod stand manual labour and then shifting of damaged components by manual head load approx. 0.5kms to the nearest roadside, further loading in the vehicle for transportation of gate to workshop. Providing and then welding the MS sheet of 6mm thickness on the frame of channel structure and finishing the gate structure. Job includes fabrication providing and fitting at site of hoisting channel-02 no.s fabricated out of MS Channel 100x50 mm of approx length 6’5” and proper anchoring in the PCC. Fitting of already dismantled manually operated, worm gear type winch machine along with base plate and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/stem rod before fitting. Job also includes drilling of holes on top hoisting channels, L-clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to nearest roadside, unloading and further shifting by manual head load to site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour tools and tackles using chain pulley block and tripod. Connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Job includes grouting of the M.S frame/channels by way of concrete work wherever necessary as per site conditions. Checking of the gate for smooth operation at site. The firm should quote rate including rebate on old items Complete job includes charges of hydraulic crane, cost of material, transportation charges, labour charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions in consultation with site incharge.

G S ENGINEERING WORKS

AJAY ELECTRIC AND MECH WORKS