Cr-Mo PRESSURE VESSELS

LCF MP/HT Separator Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 1.01 Tag no-1P30-VV-2632

Mandatory Spares for item no.1.00,LCF MP/HT Separator, Scope as per material requisition.

TRANSPORTATION: (For Item no. 1.00)-LCF MP/HT Separator Inland transportation charges by road of all supplies from Vendor’s works / shop to Project site, Numaligarh Refinery, Golaghat, Asaam / Rail Transportation up to NMGS/Numaligarh Refinery Project Siding.( Excluding GST)

CIF value of Import Content against S.no-1.0, LCF MP/HT Separator (To be quoted by INDIAN BIDDERS ONLY ).

LCF MP/MT Separator including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 2.01 Tag no-1P30-VV-2635

Mandatory Spares for item no.2.00, LCF MP/MT Separator Scope as per material requisition.

TRANSPORTATION: (For Item no. 2.00)-LCF MP/MT Separator Inland transportation charges by road of all supplies from Vendor’s works / shop to Project site, Numaligarh Refinery, Golaghat, Asaam / Rail Transportation up to NMGS/Numaligarh Refinery Project Siding.( Excluding GST)

CIF value of Import Content against S.no-2.0,LCF MP/MT Separator (To be quoted by INDIAN BIDDERS ONLY ).

HDT MP/MT Separator Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 3.01 Tag no-1P31-VV-2633

Mandatory Spares for item no.3.00, HDT MP/MT Separator,Scope as per material requisition.

TRANSPORTATION: (For Item no. 3.00)-HDT MP/MT Separator Inland transportation charges by road of all supplies from Vendor’s works / shop to Project site, Numaligarh Refinery, Golaghat, Asaam/ Rail Transportation up to NMGS/Numaligarh Refinery Project Siding.( Excluding GST)

CIF value of Import Content against S.no-3.0,LCF HP/MT Separator (To be quoted by INDIAN BIDDERS ONLY ).

Fractionator Feed Drum Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 4.01 Tag no-1P31-VV-2637

Mandatory Spares for item no.4.00, Fractionator Feed Drum,Scope as per material requisition.

TRANSPORTATION: (For Item no. 4.00)-Fractionator Feed Drum Inland transportation charges by road of all supplies from Vendor’s works / shop to Project site, Numaligarh Refinery, Golaghat, Asaam/ Rail Transportation up to NMGS/Numaligarh Refinery Project Siding.( Excluding GST)

CIF value of Import Content against S.no-4.0,Fractionator Feed Drum (To be quoted by INDIAN BIDDERS ONLY ).

LCF Catalyst Transfer Vessel Including Erection & Commissioing spares , scope as defined in material requisition but excluding mandatory spares. Cost of mandatory spares to be furnished in 5.01 Tag no-1P30-VV-8931A/B

Mandatory Spares for item no.5.00, LCF Catalyst Transfer Vessel,Scope as per material requisition.

TRANSPORTATION: (For Item no. 5.00)-LCF Catalyst Transfer Vessel Inland transportation charges by road of all supplies from Vendor’s works / shop to Project site, Numaligarh Refinery, Golaghat, Asaam/ Rail Transportation up to NMGS/Numaligarh Refinery Project Siding.( Excluding GST)

CIF value of Import Content against S.no-5.0,LCF Catalyst Transfer Vessel (To be quoted by INDIAN BIDDERS ONLY ).

Unit rate for Supervision of erection and commissioning for quoted items as per enclosed instructions to vendor Per Diem charges upto 8 hrs on normal working days. ( BIDDERS TO QUOTE UNIT RATE FOR DIEM CHARGES )

Unit rate for Supervision of erection and commissioning of items for Quoted item as per enclosed instructions to vendor Overtime rate per hour (beyond normal 8 hours on normal working days). ( BIDDERS TO QUOTE OVER TIME RATE PER HOUR )

Unit rate for Supervision of erection and commissioning for quoted items as per enclosed instructions to vendor Overtime rate per hour for work on weekly off days / holidays (as applicable to Refinery Site). ( BIDDERS TO QUOTE OVER TIME RATE PER HOUR )

Description of Work / Item(s)

Two Year Spares for Tag no-1P30-VV-2632 – LCF MP/HT Separator , item Sr No 1.00 (Spare no. - 1.01 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 1.02 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 1.03

Spare no. - 1.04

Spare no. - 1.05

Spare no. - 1.06

Spare no. - 1.07

Spare no. - 1.08

Spare no. - 1.09

Spare no. - 1.10

2 years Normal operational & maintenance spares (as per vendor recommendation) against , Tag no-1P30-VV-2635 – LCF MP/MT Separator, item Sr No 2.00 (as per vendor recommendation) against , (Spare no. - 2.01 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 2.02 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 2.03

Spare no. - 2.04

Spare no. - 2.05

Spare no. - 2.06

Spare no. - 2.07

Spare no. - 2.08

Spare no. - 2.09

Spare no. - 2.10

Two Year Spares for Tag no-1P31-VV-2633 – HDT MP/MT Separator (as per vendor recommendation) against , item Sr No 3.00 (Spare no. - 3.01 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 3.02 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 3.03

Spare no. - 3.04

Spare no. - 3.05

Spare no. - 3.06

Spare no. - 3.07

Spare no. - 3.08

Spare no. - 3.09

Spare no. - 3.10

Two Year Spares for Tag no-1P31-VV-2637 – Fractionator Feed Drum (as per vendor recommendation) against , item Sr No 4.00 (Spare no. - 4.01 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 4.02 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 4.03

Spare no. - 4.04

Spare no. - 4.05

Spare no. - 4.06

Spare no. - 4.07

Spare no. - 4.08

Spare no. - 4.09

Spare no. - 4.10

Two Year Spares for Tag no-1P30-VV-8931A/B – LCF Catalyst Transfer Vesse (as per vendor recommendation) against , item Sr No 5.00 (Spare no. - 5.01 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 5.02 (Mention the spare name-Qty-Unit in Unpriced Schedule)

Spare no. - 5.03

Spare no. - 5.04

Spare no. - 5.05

Spare no. - 5.06

Spare no. - 5.07

Spare no. - 5.08

Spare no. - 5.09

Spare no. - 5.10

Description of Work / Item(s)

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips as specified in respective datasheet) - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than weight indicated on respective datasheet shall NOT be considered for this line item ; Clip with pad materials : SA 387 Gr 11 Cl. 2 Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply)

Unit Rate per kg for addition of additional clips such as Platform clips, Ladder clips & Pipe support clips (if total weight of such clips as specified in respective datasheet) - Total Weight Sum of Ladder Clips, Pipe Support Clips, Platform support clips, less than weight indicated on respective datasheet shall NOT be considered for this line item ; Clip with pad materials : SA 516 Gr.70N Unit rate shall include mechanical design + fabrication + Supply Insulation clips, Fire-proofing clips shall NOT be considered for this line item ( These shall be included in main supply )

Unit Rate for reduction or increase per kg for lower Skirt. This line item shall NOT be considered in case of no change on the skirt length as specified in respective mechanical datasheet for Vessels. Skirt / Saddle support material - SA 516 Gr 70N Unit rate shall include mechanical design + fabrication + Supply

Unit Rate for reduction or increase per kg for lower Skirt. This line item shall NOT be considered in case of no change on the skirt length as specified in respective mechanical datasheet for Vessels. Skirt / Saddle support material - SA 387 Gr 11 Cl. 2 Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 387 Gr 11 Cl. 2 Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 387 Gr 22 Cl. 2 Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on external surface of Vessels. This line item shall NOT be considered in case of no change on the external supports as specified in MR for Vessels. Support materials - SA 516 Gr 70N Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion for finished weight of forged SA 182 / 336 F11 + SS 347 WO materials. This is applicable for all forged nozzles and other forged components. .

Unit rate per kg for addition / deletion for finished weight of forged SA 182 / 336 F11 (+ NACE Compliance)+ SS 347 WO materials. This is applicable for all forged nozzles and other forged components. .

Unit rate per kg for addition / deletion for finished weight of forged SA 182 / 336 F22 Cl. 3 materials. This is applicable for all forged nozzles, Grayloc connections and other forged components.

Unit rate per kg for addition / deletion for finished weight of forged SA 182 F347H materials. This is applicable for all forged nozzles and other forged components.This is applicable for all grayloc connection and nozzles.

Unit rate per kg for addition / deletion for all fasteners (SA 193 Gr B16 / SA 194 Gr 7. Refer MR to meet the technical and material requirements for this fasteners material. Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion for finished weight of forged SA 182 F304 materials. This is applicable for all coupling.

Unit rate per kg for addition / deletion of supports welded on Internal surface of Vessels. This line item shall NOT be considered in case of no change on the internal supports as specified in MR for Vessels. Support materials - SA 240 TP 347 + NACE Compliance Unit rate shall include mechanical design + fabrication + Supply

Unit rate per kg for addition / deletion of supports welded on Internal surface of Vessels. This line item shall NOT be considered in case of no change on the internal supports as specified in MR for Vessels. Support materials - SA 240 TP 347 Unit rate shall include mechanical design + fabrication + Supply

Unit rate per meter for addition / deletion of nozzle pipe. This line item shall NOT be considered in case of no change on the pipe length as specified in respective mechanical datasheet for Vessels. Pipe material - Solid SS 347 (Refer MR, for specific grade of pipe material) Unit rate shall include mechanical design (to suit respective reactor mechanical design conditions) + fabrication + Supply SIZE-2" NB

Unit rate for addition / deletion for Nozzles with Grayloc clamped connectors (pairs of clamps with Seal Ring + stud bolting) for each size: Grayloc clamped connectors to suit mechanical design condition (as shown on respective mechanical datasheet) for 2 ¼ Cr-1Mo materials. Refer MR, For specific grade of the above Cr-Mo-V materials and other details. SIZE-2" Nozzle with Grayloc Clamped connector

3" Nozzle with Grayloc Clamped connector

4" Nozzle with Grayloc Clamped connector

5" Nozzle with Grayloc Clamped connector

6" Nozzle with Grayloc Clamped connector

8" Nozzle with Grayloc Clamped connector

10" Nozzle with Grayloc Clamped connector

12" Nozzle with Grayloc Clamped connector

14" Nozzle with Grayloc Clamped connector

16" Nozzle with Grayloc Clamped connector

18" Nozzle with Grayloc Clamped connector

20" Nozzle with Grayloc Clamped connector

22" Nozzle with Grayloc Clamped connector

24" Nozzle with Grayloc Clamped connector

26" Nozzle with Grayloc Clamped connector

28" Nozzle with Grayloc Clamped connector

30" Nozzle with Grayloc Clamped connector

32" Nozzle with Grayloc Clamped connector

34" Nozzle with Grayloc Clamped connector

36" Nozzle with Grayloc Clamped connector

40" Nozzle with Grayloc Clamped connector

Unit rate for addition / deletion for SS 347 solid alloy Grayloc mating fitting for each size: Grayloc clamped connectors to suit mechanical design condition (as shown on respective mechanical datasheet) for 2 ¼ Cr-1Mo- ¼ V + E-309L/E-347 WO materials. Refer MR, For specific grade of the above SS 347 materials and other details. SIZE-2" Solid SS alloy Grayloc mating fitting

3" Solid SS alloy Grayloc mating fitting

4" Solid SS alloy Grayloc mating fitting

5" Solid SS alloy Grayloc mating fitting

6" Solid SS alloy Grayloc mating fitting

8" Solid SS alloy Grayloc mating fitting

10" Solid SS alloy Grayloc mating fitting

12" Solid SS alloy Grayloc mating fitting

14" Solid SS alloy Grayloc mating fitting

16" Solid SS alloy Grayloc mating fitting

18" Solid SS alloy Grayloc mating fitting

20" Solid SS alloy Grayloc mating fitting

22" Solid SS alloy Grayloc mating fitting

24" Solid SS alloy Grayloc mating fitting

26" Solid SS alloy Grayloc mating fitting

28" Solid SS alloy Grayloc mating fitting

30" Solid SS alloy Grayloc mating fitting

32" Solid SS alloy Grayloc mating fitting

34" Solid SS alloy Grayloc mating fitting

36" Solid SS alloy Grayloc mating fitting

40" Solid SS alloy Grayloc mating fitting

Larsen & Toubro Limited

Isgec Hitachi Zosen Ltd

Larsen & Toubro Limited