CA NO GE/ND-06/2023-24 REPAIR/MAINTENANCE OF CERTAIN EM FITTING /FIXTURES AND INTERNAL WIRING AT CERTAIN BLDGS OF NDC AND RAKSHA BHAWAN AREA UNDER GE NEW DELHI

Amount

Taking down copper/aluminium point wiring ( fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L in replacement of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes(6mm thick) suitable for modular switch/sockets including modular plates of suitable size as per site requirement for the following Note:if Cutting & cashing required shall be measured/paid under relevant items complete all as specified and directed. Make-RR,Polycab/Havells.

One light/ceiling fan/exhaust fan point controlled by one way switch 5 amps.

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 2 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge. Make-RR,Polycab,Havells

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified and directed

S&F submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Make : RR Kable/Havells/Finolex.

S&F submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and directed. Make : RR Kable/Havells/Finolex

S&F submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and directed. Note for item No 5 to 7 :- 2 run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F in replacement of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed. Make : Anchor/Roma/Cona

S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement switch piano flush button single pole one way 6 amps complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement switch piano flush type 15 amps single pole one way complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and directed. Make :Indoasian or Equvalent to Anchor/Roma

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and directed by Engr - in - Charge all as specified. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement electronic fan regulator modular type 120Watt step type Double Modular as per existing complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement DIMMER/ STEP type electronic fan regulator flush type 230 volts complete all as specified and directed. Make : Indoasian or Equvalent to Anchor/Roma

S&F in replacement electric bell Ding-Dong AC 230 Volt complete all as specified and directed by Engr-in-Charge. Make : Indoasian or Equvalent to Legrand/havells

Taking down DB of SPN 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed..

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and directed. Make : Legrand/Standard/Indo Asian/HPL

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and directed. Make :Indoasian or Equvalent to Legrand/havells

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed. Make : Indoasian or Equvalent to Legrand/havells

Taking down MCB type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed.

S&F in replacement of MCCB TPN 160 Amps, 415 Volt suitable for existing loadline DB complete all as specified and directed. Make : :Indoasian or Equvalent to Legrand/havells

S&F in replacement of MCB SPN 40 to 63 Amp 240 volt 10 KA complete all as specified and directed. Make : Indoasian or Equvalent to Legrand/havells

S&F in replacement of MCB SPN 32 Amp 240 volt 10 KA complete all as specified and directed. Make : Indoasian or Equvalent to Legrand/havells

S&F in replacement MCB SP 40 Amp to 63 Amp 10 KA.240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Legrand/havells

S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts complete all as specified and directed. Make : Indoasian or Equvalent to Legrand/havells

S&F in replacement Sheet Metal enclosure with plug top & MCB single pole, 20 Amps 240 volts complete all as specified and directed. Make Indoasian or Equvalent to Legrand/havells

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core lexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling secure down light circular shaped recess mounted LED light of 15 W complete suitable for existing light fittings complete all as specified and directed. Cat part No Ceiling secure of Philips or Equalivalent of CG/Havells

S&F ceiling secure down light circular shaped recess mounted LED light of 22 W complete suitable for existing light fittings 1650lm,4000K complete all as specified and directed. Cat part No Ceiling secure of Philips or Equalivalent of CG/Havells

Supply and fix only fan capacitor of the following capacity :- (Make : Epcos/ Anchor)

Supply and fix in replacement non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

Supply and fix in replacement non metallic rigid PVC conduit medium grade 25 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store & Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and directed.

All as per ser item No 41 but exhaust fan 230/300 mm sweep

All as per ser item No 41 but exhaust fan 400 mm sweep

S&F in replacement ceiling fan Ball bearing of suitable size & model (as per sample). Make:- NBC/ SKF

M&L for replacing U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size complete all as specified and directed.

M & L in replacement for Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete all as specified and directed.

S &F of Canopy of Celing fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete all as specified and directed.

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc complete all as specified and directed.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

S & F fan blade assy 1200/1400 mm sweep white colour with sqrue complete all as specified and directed.

M & L heating element of 2.0 KW (Rectangle) as required at site including rubber washers (ISI marked) etc complete all as specified and directed Make : Venus or As per sample.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers complete all as specified and directed by Engineer -in - charge.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site complete all as specified and directed. (As per sample).

M&L in replacement chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

M&L in replacement PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark complete all as specified and directed by Engr-in Charge

M&L in replacement safety nut for high pressure release complete all as specified and directed. (As per sample).

S&F in replacement non return valves 15mm dia and connecting up complete all as specified and directed. (ISI marked).as per sample

M&L in replacement top cover for geysers of 50 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete all as specified and directed.

M&L in replacement top cover for geysers of 25 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete all as specified and directed.

S&F in replacement bottom cover for geysers of 50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed.

S&F in replacement bottom cover for geysers of 25 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed.

S&F in replacement of outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horigontal type complete all as specified and directed.

S&F in replacement of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horigontal type complete all as specified and directed.

S&F in replacement thermostat (ISI Marked) for 50 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

S&F in replacement thermostat (ISI Marked) for 25 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

S&F in replacement indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample) complete all as specified and directed.

Supply and fix in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed.

S&F in replacement 9 watt LED driver suitable for 9 watt LED bolard light fittings complete all as specified and directed. Make : Bajaj/Philips/CG

S&F in replacement 30 watt LED driver suitable for 30 watt LED security light fittings as per site rqmt complete all as specified and directed. Make : Havells/Philips/CG

S&F in replacement 40 watt LED driver suitable for 40 watt LED security light fittings as per site rqmt comlete all as specified and directed. Make : Havells/Philips/CG

S&F in replacement of 100 Amp changeover switch complete all as specified. Make : Havells/CG/ Bajaj

S&F in replacement 1 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 3 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 4 modules incl white plate with cover complete all as specified and directed.

S&F in replacement 8 modules incl white plate with cover complete all as specified and directed.

S&F in replacement blanking plate for switch complete wherever required

S&F in replacement 3/5 Watt LED candle type warm white lamp complete suitable for existing lamp complete all as specified and directed. Make : Havells/CG/ Philips

S&F in replacement LED Bulb 18 Watt warm white/cool day 240 volts complete all as specified and directed. Make : CG/PHILIPS/HAVELLS

S&F in replacement 9 watt theread type LED Bulb suitable for existing size complete all as specified and directed. Make : CG/PHILIPS/HAVELLS

S&F in replacement 9 watt jallbi type LED Bulb suitable for existing size complete all as specified and directed. Make : CG/PHILIPS/HAVELLS

S&F in replacement 9 watt inverter LED Bulb suitable for existing size complete all as specified and directed. Make : CG/PHILIPS/HAVELLS

S & F C/fan blade suitable for 300/400 mm sweep with sqrue complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make -CG cat part no-LBHP-10-CDL,EUUIVALENT IN Havells,Plilips.

Supply & Fixing in replacement light freedom Bldg security light compressing pressure, die cast housing for better aesthetics and thermal management. Comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 40 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete including taking down existing 40 watt LED fittings all as specified and directed. Make - CG freedom+ Cat pt no - LSTS-40-CDL eqivalent to Havells,phillps.

Supply & Fixing in replacement light freedom Bldg security light compressing pressure, die cast housing for better aesthetics and thermal management. Comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 30 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC muliti stranded copper cable of suitable size complete including taking down existing 30 watt LED lamp fittings all as specified and directed Make - CG freedom+ Cat pt no - LSTS-30-CDL Equvalent to Havells,phillps.

Supply and fixing in replacement MCCB DB VTPN Vertical load line 4 way double door IP 54 "IK 09 cat no 507750 Make Legrand orequivalent or Equivelent Make of L & Tor C&S

Supply and fixing in replacement MCCB, 4 pole, 415 volt of capacity 63 Amp, breaking capacity 25 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, etc complete all as specified and directed by Engr-in-Charge. Make : Legrands/Schnieder/L&T cat part No 420053

M & L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron (wire 4mm) as earthinglead lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 5 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth streep 7.5m will be measured and paid separately)

M & L in replacement For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 25x4mm galvanised iron strip/wire complete all as specified and directed.

S & F inverter LED Tube light batten of 5700K to 6500K , 10W ,rated voltage 230 V AC 50 Hz having high power high brightness LM 80 certified LED with PC /Aluminium extrusion Milky diffuser front cover ,lumen maintenance of 50000 hours @ L70 li ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, protection will be IP 20,overcharging ,deep discharging ,thermal compensation, marked with standard IS 10322,LM79 complete all as specified and directed.

S & F in replacement LED Tube light batten of 5700K to 6500K , 18W ,rated voltage 230 V AC 50 Hz having high power high brightness LM 80 certified LED with PC /Aluminium extrusion Milky diffuser front cover ,lumen maintenance of 50000 hours @ L70 li ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, protection will be IP 20,overcharging ,deep discharging ,thermal compensation, marked with standard IS 10322,LM79 complete all as specified and directed. cat part no LCTL18-CDL or equivalent in phillips/Havells

S&F bronze coloured floral brown glass metal aesthetically designed Wall mounted decorative wall LED light of 8/9 W fixture with opal diffuser to give glare free light including suitable LED inverter lamp of 8/9 W having Lamp base E27/B22 (colour-Natural white/cool day/Warm White). Make:Philips cat No-37934/06 or Equalivalent of CG/Halonix

S&F in replacement aesthetically designed Wall mounted decorative bedlight LED light of 4 W fixture with opal diffuser to give glare free light including suitable LED lamp of 4 W having Lamp base E27. Make:Philips cat No-56240/31 or Equalivalent of CG/Havells

S&F of inverter security light fitting 60W with alluminium pdc top maintanable clear toughfened glass suitable high efficient secoundery lence LM80 cerfied LED with 50000 hr @ L70 along with isolated electronic CC driver RTC enable with insulated copper wire covered with SS & MS zing plated and passivated.The light should be IP66 ingress protection and IK05 impact resistance li ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, protection will be IP 20,overcharging ,deep discharging ,thermal compensation, marked with standard IS 10322,LM79 complete all as specified and directed.

S&F aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27. Make:Philips cat No-34034/14/86 or Equalivalent of CG/Havells

S & F inverter bulk head light of 5700K to 6500K , 10W ,rated voltage 230 V AC 50 Hz having high power high brightness LM 80 certified LED with PC /Aluminium extrusion Milky diffuser front cover ,lumen maintenance of 50000 hours @ L70 li ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, protection will be IP 20,overcharging ,deep discharging ,thermal compensation, marked with standard IS 10322,LM79 complete all as specified and directed.

S & F in replacement metal clad AC plug,20A 2P=E,230V AC complete all as specified and directed.

S & F in replacement metal clad AC socket,20A 2P=E,230V AC complete all as specified and directed.

S & F in replacement steelgrip plus-self adhesive PVC Electrical insulation tape(1.8cmx6.5 m x 0.125mm)(30 rolls) complete all as specified and directed.

RAJDHANI ENTERPRISES

POONAM ENTERPRISES

SANJEEV ENTERPRISES

M/S ANIL KUMAR

ASHUTOSH BUILDERS

RUCHIKA ENGG.WORKS