REPAIR/MAINT OF STEEL FURNITURE FOR JCOs/ORs MARRIED ACCN/OTM UNDER GE (SOUTH) DELHI CANTT-10

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact, as applicable as per drgs. B) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(south) Delhi Cantt including BSO Furniture Yard as directed by Engineer-in-Charge C) The make /manufacturer of the material shall be from one of the make as specfied under the list of PRODUCTS AND NAME OF MANUFACTURERS at srl page- NO 107 of Tender Documents

Table Office Officer Steel : FD-84/1003

Legs, as per drg ( Note: Each leg shall be measured and paid seperately)

S/S Lock of drawer/shutters as per drg

Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

Stiffeners as per drg

PVC Shoes std quality all as per drg

Welding the joints of legs / square tube as per drg

Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Office Clerk Steel : FD-84/381, FD 1004

Legs, as per drg

Lock of drawer as per drg

Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

Stiffeners as per drg

PVC Shoes std quality all as per drg

Welding the joints of legs / square tube as per drg

Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Almirah Large Steel : FD-67 / 1031/ TP

S/S 6 lever locks as per drg

CP Handle as per sample/as per drg

Legs as per drg

Repairs to door as specified including replacement of hinges

Repair/adjustment to existing shelf including welding as per drg

Shutter/door as per drg.

Shelf as per drg

Almirah Medium / Small Steel: FD-1032/FD-104(M)

S/S 6 lever locks as per drg

CP Handle as per sample/as per drg

Legs as per drg

Repairs to door as specified including replacement of hinges

Repair/adjustment to existing shelf including welding as per drg

Shutter as per drg.

Shelf as per drg

Table 3x2 with and w/o drawer: FD-1008/1007

Welding wherever required as directed by E-in-Incharge

Top 16 mm thick plywood BWP grade ISI marked in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

Rubber shoe std quality as per drg

SS Lock of drawer as per drg

Table 3x3: FD-1009

Welding wherever required as directed by E-in-Incharge

Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Rubber shoe std quality as per drg

Shoe Rack Steel:FD/E6/MAP/02 (R)

Welding including bar wherever required as directed by E-in-Incharge

Replacement of unserviceable Jali wherever required as per drg

Hard rubber shoes std quality as per drg

Chair Verandah : FD-19, FD-256, FD-359

Conduit section any member of MS conduit pipe 16G, 19mm dia including painting with primer as per drg.

Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

Hard rubber shoes as per drg and as directed by EIC

Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/GE)

Locker Steel :FD-1029/257/SKD-562

S/S Hasp & Staple, rest as per drg

Repairs to door/sides including replacement of hinges including welding

Shutter/door as per drg.

Legs as per drg

CP Conduit pipe as per drg

Shelf as per drg.

Charpoy IP Ply Top: FD/MAP-II/01

12 mm thick plywood top BWP grade as per existing shape and size fixed with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by EIC

Hard rubber shoe std quality as per drg

Welding work wherever required as directed by EIC

Chair School with hard board :FD/E6/MAP/05

One piece seat and back as per drg.

Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Welding work wherever required as directed by Engr-in-Charge.

Hard rubber shoe std quality as per drg

Charpoy GI pipe ply top: FD-220

12 mm thick plywood top BWP grade as per existing shape and size with shunken nut/bolts complete all as drg and as directed

S& F 895 mm long stifnner made FI of size 40x5 mm thick duly painted with red oxide primer complete all as directed by EIC.fabrication as per item 16(a)

S&F in replacement of long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg complete all as specified and directed.

Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 13.03 here in before.

Replacement of unservicable legs from charpoy GI pipe 32mm dia but "except pipe" including cutting threading etc as required and directed with bottom plug made of MS Round disc and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed. Note : Pipe obtained from ser item No 13.04 above shall be used for this items.

S&F in replacement of GI 3 way elbow 32 mm dia complete all as specified and directed.

S&F in replacement of 32mm check nuts complete all as specified and directed.

Welding work wherever required as directed by Engr-in-Charge.

Replacement of old us Nylon newar from Charpoy GI Pipe, tightening of loose components of complete charpoy and S&F new plywood top 12mm thick BWP grade of required size fixed with mild steel galvanised iron nuts and bolts of required size and suitable length, S&F two stiffeners 895 mm long made out of MS flat iron, 40x5 mm duly painted with two coat of black colour synthetic enamel paint over a one coat of red oxide primer to be fixed over the charpoy by welding. Total 10 nos Nut and bolts with washers shall be used for fixing of plywood top complete all as directed by Engineer-in-Charge.

Charpoy IP folding : FD-388(R )

08 mm thick plywood top BWP grade as per existing shape and size with shunken nut/bolts complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Welding work wherever required with FI as directed by Engr-in-Charge.

A) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of GE(South) Delhi cantt including BSO's Furniture Yard as directed by Engineer-in-Charge

Almirah Steel Medium/Small: FD-1032

Almirah Steel Large: FD-67/351, 1031,

Charpoy IP Hard Top: MAP

Chair Verandah: MAP/FD

Locker Steel :FD-1029/257/127

Table office officer steel: FD-1003

Table Clk steel: FD-1004

Table 3x2 with and w/o drawer: FD-1007/1008

Charpoy IP folding: FD-388 (R)

Rack steel any type/Book Shelf open large all type : FD-1038 & 1023/69

Table 3x3: FD-1009

Rack Shoe Steel FD-FD/E6/MAP/02 R

Charpoy GI pipe ply top: FD-220

Chair School with hard board :MAP

Notes for BoQ:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

The furniture article as and when received from Unit/Occupant as case may be, the Engineer-in-Charge (BSO) shall enter these furniture articles in furniture deposit register (IAFW-1830) and shall subsequently issue for necessary repair/polishing to the Contractor through Nominal issue voucher(NIV) mentioning the date of issue duly signed by the contractor. In certain cases the repairable furniture article can also be issued directly from units.

The contractor shall return these furniture articles after repair work on or before 30 days from the date of issue of furniture and nominal Receipt Vouchers (NRV) shall be issued duly signed by furniture I/C, BSO and Contractor.

If the contractor fails to repair and return these furniture article within 30 days, a penalty of Rs 10 per furniture article per day will be levied to contractor and the same will be recovered from contractors claims.

Generally the periodicity for issue of furniture from BSO Yard shall be once or twice in a month (reckoning from date of commencement of work as per WO No.1) subjected to the users requirement/availability of furniture for repair works. However care shall be taken that repairable furniture shall be issued not more than 20% of total qty of CA provision in one month.

Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the adjoining Parts and S&F new componants of same pattern as per Drg in lieu of Dismantled /Discorded componants including Tighting the Joints, Pinning, Screwing, wedging, Gluing, Providing Hinges, Placing every part in-tact condition.

Cleaning, Derusting of Stain/Dirt old polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying two coats of French Polish for wooden Items .

Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting /Polishing on whole Items should be matched and desired finish shall be obtained.

Work will be executed where the Furniture Item's exist in different user unit's of BSO GE South New Delhi including Furniture yard of BSO's Sub Division.

SMS Enterprises

M/S Shri Balaji Enterprises

M/S NEHAL ENTERPRISES

UNIVERSAL ENTERPRISES