C/O Toilet block at Mohalla Neelaghat on Rampur road ward no. 11 MC Una.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sq.m on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mt. In all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Form work Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Mild steel and Medium Tensile steel bars

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

6mm cement plaster to ceiling: In cement mortar 1:3 (1 cement : 3 sand)

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth: In course sand in cement mortar 1:6 (1 cement : 6 sand)

20mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth : In course sand in cement mortar 1:6 (1 cement : 6 sand)

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 50 mm thick.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/paneling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm dia .

Providing and fixing vitreous china water closet squatting pan ( Indian type W.C. pan) size 580 mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately : Orissa pattern

Providing and fixing 100 mm size ‘P’ or ‘S’ trap for water closet ( squatting pan ) including jointing the trap with pan and soil pipe in cement mortar 1:1 (1cement :1 sand ) Vitreous cina

Providing and fixing 10.0/12.50/15.00 litres PVC low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve less siphon, 15 mm nominal size brass valve with polythene float, CP brass handle unions and couplings for connection with inlet, out let and over flow pipe, 40mm dia. PVC flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately).

Providing and fixing vitreous china bowl pattern urinal including connection with the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for separately) : Flat back type of size 430 mm X 260 mm X 350 mm

Providing and fixing automatic flushing cistern with a pair of CI or MS brackets complete with fittings including CI symphonic apparatus, mosquito proof lid, CP brass unions and coupling for connections with inlet out let and over flow pipe including cutting holes and making good the same (over flow pipe to be measured and paid for separately) : PVC 5 litres capacity.

Providing and fixing PVC waste pipe for wash basin 32 mm dia.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings : Flat Back 550 mm X 400 mm

Providing and fixing 600 mm X 450 mm beveled edge mirror of superior glass mounted on 6 mm thick AC sheet or ply wood sheet and fixed to wooden plugs with Cp brass screws and washers.

Providing and fixing CP brass bib tap (superior or heavy type ) 15 mm dia.

Providing and fixing CP brass pillar tap with capstan head : 15 mm dia.

Providing and fixing CP brass angle valve : 15 mm dia.

Providing and fixing PVC connection pipe with brass unions: 300mm length 15 mm nominal.

Providing and fixing brass full way valve with wheel : 15 mm nominal bore

Providing and fixing MI union for wash basin 32mm dia.

Providing and fixing to wall ceiling and floor GI pipe 15mm nominal dia with accessories. B class ISI Marked

Providing and fixing PVC pipe 4.50 kg /cm2 pressure 100 mm dia. ISI Marked

Providing and fixing PVC pipe 4.50 kg /cm2 pressure 75 mm dia. ISI Marked

Providing and fixing PVC water storage tank 500 lts. Capacity. SINTEX

Providing and fixing PVC floor trap 75mm dia. ISI Marked

Providing and fixing CP Jali 75mm

MAHESH ANGRA

Jaiveer Singh

SHIVAM OHRI GOVT CONTRACTOR

Rajinder Kumar

MOHIT BEDI

Tilak Raj