Providing and Fixing of Sanitary items and allied work in Model Jail Sector 51, U.T. Chandigarh Fansi Chakki, Midday Meal, Music Room

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10

All kinds of soil .2.10.1

Pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : .6.4

Cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300mm x 600mm) .8.31

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent. .9.96

as per detail attached .

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97

as per detail attached .

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1

as per detail attached .

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: .10.14

Profile B .10.14.1

Fixing with adjustable lugs with split end tail to each jamb .10.14.1.1

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. .11.56

Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red .11.56.2

as per detail attached .

12 mm cement plaster of mix : .13.4

1:4 (1 cement: 4 coarse sand) L.S QTY .13.4.1

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: .14.5

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm .14.5.1

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. .15.2

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) .15.2.2

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : .15.12

Of area 3 sq. metres and below .15.12.1

as per detail attached .

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. .15.25

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved .15.60

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3

W.C. pan with ISI marked white solid plastic seat and lid .17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : .17.7

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. .17.7.3

Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13

Orissa pattern W.C. pan of size 580x440 mm .17.13.2

Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19

10 litre (full flush) capacity-white .17.19.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete .17.28

Flexible pipe .17.28.2

32 mm dia .17.28.2.1

Providing and fixing soil, waste and vent pipes .17.35

100 mm dia .17.35.1

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2

75mm dia .17.35.2

Centrifugally cast (spun) iron socketed pipe as per IS: 3989 .17.35.2.2

Providing and fixing heel rest sanitary bend .17.4

100 mm dia .17.40.1

Sand cast iron S&S as per IS - 3989 .17.40.1.2

Providing and fixing collar : .17.57

Sand cast iron S&S as per IS - 3989 .17.57.1.2

Sand cast iron S&S as per IS - 3989 .17.57.2.2

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60

100 mm inlet and 75 mm outlet .17.60.2

Sand cast iron S&S as per IS - 3989 .17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall .18.10

20 mm dia nominal bore .18.10.2

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : .18.11

15 mm dia nominal bore .18.11.1

20 mm dia nominal bore .18.11.2

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : .18.17

20 mm nominal bore .18.17.1A

Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21

30 cm length .18.21.1

15 mm nominal bore .18.21.1.1

Providing & fixing terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49

15 mm nominal bore .18.49.1

providng & fixing Angle Valve for basin mixer and geyser points of approved quality conforming to IS:8931. .18.53

15mm nominal bore .18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A

Cutting holes up to 30x30 cm in walls including making good the same .18.76

With common burnt clay F.P.S. (non modular) brick .18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. .18.77

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4

100x100 mm size P type .19.4.1

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1

Providing and fixing C.P. brass long body bib cock of approved quality .NSR

15 mm nominal bore .

Providing and fixing white vitreous china flat back half stall urinal of size 375 x 390 x 590 mm standard size C.P. brass flush pipe, spreaders and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Make Cera Model CAPRIANA Cat. No. S4020112* or equvilant model make of approved make list as approved by EIC. .NSR

Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect .NSR

Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame seasoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect. .NSR

Providing and fixing CP Soap dish holder complete in all respect as per entire satisfaction and approval of make by EIC. .NSR

Providing and fixing of HCI P trap 4" dia complete in all respect. .NSR

Providing & fixing of C.P 1'-4" long 32mm bend as per approved make complete in all respect. .NSR

Dismantling of floor tiles and wall tiles complete in all respect. .NSR

Providing and fixing SFRC Inspections chamber cover 600x600x35 mm thick made out of M.S angle iron size 35x35x5 mm and TMT bars 10mm i/d both sides including cutting welding and fixing with cement concrete 1:1/2:3 complete. .NSR

Providing and fixing PVC Pipe 4" (100mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect .NSR

Providing and fixing of drip seal joints to sand cast iron/centrifugally cas (spun) iron pipes and fittings of diameter .NSR

100 mm dia .

75 mm dia .

Providing and fixing CP waste 32 mm, 150 mm long thread for wash basin /sink or as approved by EIC .NSR

Providing and fixing S.S. gratings Complete in all respect .NSR

Please Enable Macros to View BoQ information