Construction of Approach roads/ macadamization on either side and over deck slab of Kanthpora truss girder bridge under Languishing Project Scheme. (work to be carried out as per directions of engineer incharge of the work as per standard specificati

Amount

Supplying, stacking, laying, spreading, watering and compacting graded crushed stone aggregate of size 90mm to 45 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of binding material to fill up interstices of coarse aggregate, watering and compacting to the required density including cost and carriage of materials from source to site of work for an avg. lead of 30 km,including all other charges –complete job

Supplying, stacking, laying, spreading, watering and compacting graded crushed stone aggregate of size 63mm to 45 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, including supplying, stacking applying and brooming requisite type of screening and binding material to fill up interstices of coarse aggregate, watering and compacting to the required density including cost and carriage of materials from source to site of work for an avg. lead of 30 km,including all other charges –complete job

Supplying, stacking, laying, spreading, watering and compacting graded crushed stone aggregate of size 53mm to 22.4 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, including supplying, stacking applying and brooming requisite type of screening and binding material to fill up interstices of coarse aggregate, watering and compacting to the required density including cost and carriage of materials from source to site of work for an avg. lead of 30 km,including all other charges –complete job

Providing and applying Tack/primer coat using hot straight run bitumen of with bitumen of grade 80/100 including heating the bitumen with spraying the bitumen mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the existing road surface as per specifications to remove all dirt, dust, mud etc. and finally brooming ( on W.B.M. @ 0.75 Kg/sqm) including cost and carriage of all material and including all other charges. Complete job.

Providing / laying premix bitumen macadam base course with crushed stone aggregates. of quality size and grading as specified in CPWD specification and straight run bitumen of grade 80/100 @ 3% by weight of total mix @ 60Kgs/Cm incl. hot mix of stone aggregates. and bitumen in hot mix plant, transporting mixed material and laying with paver finisher to the required level and grade and alignment and rolling with smooth wheeled , vibratory and tandom roller of 8 to 10 tonne as per specification and direction of Engineer-in charge to achieve the required compaction and density (50mm average compacted thickness) complete incl. cost and carriage of bitumen and all other materials involved complete job

Providing, laying and rolling of 25mm thick compacted semidense bituminous concrete surfacing composed of aggregate of specified grade with bituminous binder 5% ( Five percent) of mix and filler by weight mixing in suitable Hot mix plant, laying with a hydrostatic paver finisher to required grades levels and alignment, to achieve the desired compaction confirming to MOST specification including surface corrections to the extent of 3% carriage of materials, loading , unloading from source to site of work incl. all taxes involved on account of labour and material including cost and carriage of bitumen and all other materials involved. Complete job

Providing and laying 6mm thick compacted seal coat of premixed fine aggregate including mixing the Hot mix plant , laid with paver finisher to required grades levels and alignments to achieve the desired compaction as per MOST specification, including cost and carriage of bitumen and all other materials involved .complete job

Providing & laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker & laid to required level and slope, including providing antiskid surface with bitumen pre-coated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm& at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (considering bitumen using 10.2% as per MORTH specification) 40mm average compacted thickness, including cost and carriage of all materials involved .complete job

Supplying, filling and laying of khak bajri/quarry muck for berm filling etc. as per the direction of engineer-in-charge including dressing, watering and consolidation with PRR of 8 to 10 tonne capacity to required grade and alignment including cost and carriage of all materials from source to site of work complete job.

Providing and fixing of angle iron (100x100x10mm) as expansion joint including providing and fixing of additional 16 mm dia steel tie with main steel of approach/ deck slab including all charges of welding, cutting etc. complete job. Note: angle iron shall be supplied departmentally and cost shall be deducted @ Rs 72 per kg.

Providing and fixing of 10mm thick M S cover plates over expansion joints including cutting, manufacturing, welding as required at site and including cost and carriage of all materials etc. complete job.

Providing and applying of cement priming coats with primer of approved brand and manufacture, one or more coats over new concrete surface including of rough surface wherever required including all charges etc. complete.

Providing and applying painting over new concrete surface with two or more coats of plastic emulsion paint of approved brand and manufacture and specified shade or in different shades/designs to give an even shade excluding priming coat but including sand papering and cleaning of surface etc.( applied @ 3.84 kg/ 10 sqm).

Applying priming coat With ready mixed red oxide metal primer of approved brand and manufacture on new steel works including preparation of surface by cleaning with wire brushes, steel wool etc. and sand papering including cost and carriage of all material. Complete job.

Providing and applying two or more coats of synthetic enamel paint of approved brand and manufacture on new metallic surface excluding cost of priming coats but including cost of preparation of surface by sand papering, cleaning etc and including cost and carriage of all material. Complete job.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.

Providing and laying dry stone boulder filling including ramming, watering and carriage of material from source to site of work-complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering and finishing 1: 4: 8 (1cement : 4 coarse sand :8 graded stone aggregates 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering and finishing 1: 2: 4 (1cement : 2 coarse sand :4 graded stone aggregates 20mm/40mm nominal size

Centring and shuttering including strutting, propping etc.(providing and fixing). And including removal of same for walls, beams, plinth beams etc. including all charges.

Providing and filling nallah muck including ramming, watering and rolling with PRR of 8 to 10 tonne capacity and including carriage of material from source to site of work-complete job