DHULE/DMC/ WD/ DMC FUND/ 26 / 1-1 /2020-21 To invite Annual Tender Rate for a period of 03 years for Removal of Leakages on the Pipeline within the limits of Dhule Municipal Corporation

Amount

To invite Annual Tender Rate for a period of 03 years for Removal of Leakages on the Pipeline within the limits of Dhule Municipal Corporation, Dhule.

Item No 1

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No 2

Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete.

Item No 3

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.

Item No 4

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints,including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transport to departmental stores/site, unloading and stacking etc. complete as per IS-458/1988

Item No 5

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar Joints.as per IS 783/1985

Item No 6

Supply of C. I. Mechanical Compression Flanged / Socket Tail piece(Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R,.C.I.. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, forwarding charges,including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, loading, transportation and unloading at departemental store etc. complete as directed. Consignee but exclusive of octroi.

Item No 7

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, transportation and fright charges inspection charges, loading / unloading charges, conveyance to the departmental stores / site & stacking the same in closed shade duly protecting from sunrays & rains, etc. complete.

Item No 8

Lowering laying and jointing HDPE /MDPE pipes in proper position including all specials by Compression fitting /Electrofusion and But fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedures like Electrofusion machine, Electric mirror/heater /But fusion welding machine with hydraulic jack, top laoding clamp etc and all labours as directed by engineer incharge as per IS - 7634 Part II.

Item No 9

ProfldilnS and supplying in standard lengths lSl mark rigid unplastised PVC for potable water with rubber ring joints including cost of rubber ring as per l5-4985-1998, excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, transit insurance, inspectioncharges, loading, unloading, conveyance to store and stacking the same in closed shed duly protected from sun rays and rains, etc. complete (with third party inspection) (socketed)

Item No 10

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, etc. complete (with cement solvent joint / ring fit joint).

Item No 11

Providing & Jointing CID Joint.

Item No 12

Supply of C. I. Mechanical Joint Double Socket 90° (1/4) Bends as dimensionally described in Table-14 of IS-13382/1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes,including all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc complete.

Item No 13

Providing Ms material

Item No 14

Providing rubber gasket etc complete.

Item No 15

Providing nut bolt etc complete.

Item No 16

Refilling the trenches with available excavated material etc complete.

Item No 17

Providing JCB For excavation etc complete.

Item No 18

Providing Poclain For excavation etc complete.

Item No 19

Providing concrete breaker etc complete.

Item No 20

Providing Crane etc complete.

Item No 21

Providing Dewatering set etc complete.

Item No 22

Truck hire charges for 20 km to S0 krn etc complete.

Item No 23

Providing welding set with generator set etc complete.

Item No 24

Providing Spun yarn etc complete.

Item No 25

Providing lead wood etc complete.

Item No 26

Providing Cement Bag etc complete.

Item No 27

Providing Sodium Silicate etc complete.

Item No 28

Fitter

Item No 29

Heavy Labour

Item No 30

Filling in plinth and floors / trenches with contractor’s murum for bedding in 15cm to 20cm layers including watering and compaction complete.

Item No 31

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion 15 cm thick slab,etc.complete as directed by Engineer-in-charge.

Item No 32

Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.

Item No 33

Reparing Sluice valve etc complete.

Item No 34

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps including all statutary duties and taxes such as GST levied by Gol and GoM in all respect , transportation etc complete.

Item No 35

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No 36

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

BIDDERS ARE COUMPULSARY TO EACH AND EVERY ITEM COAT, ( RATE FILLUP ) .

Sai krupa B.B.S.S.S.S. Ltd. Dhule

Gayatri Construction