ADDITION ALTERATION TO AIR CREW CAFETERIA AND PROVISION OF CERTAIN MINOR WORKS IN TECH AREA AT AFA HYDERABAD

Amount

SCHEDULE 'A' PART-I (B/R PORTION):- Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as directed

Demolition of brick work / PCC block or stone / boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed

M&L for screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polished area of each tiles exc 0 .42 Sqm but not exceeding 1.00 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for vitrified ceramic tiles dark shade 10 mm thick (square / rectangular ) polished area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed..

M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed..

M&L for rendering 10 mm thick with cement plaster 1:4 on fair faces of brick work or concrete surfaces to receive wall tiles / skirting / dado etc complete all as specified and as directed...

M&L Glazed ceramic tiles in verticle surfaces 450 x 350 x 7mm thick, in skirting / daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed...

M & L for PCC 1:4:8, type D-2 mix using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc., complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C-1 PCC 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1 : 4 etc complete all as specified and as directed.

M&L for rendering in wall surfaces of 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Cutting chases, pinning in brick walls. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed...

Taking up or down steel tubing 15 mm dia and connections complete all as directed.

Taking up or down steel tubing 20 mm dia and connections complete all as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x440mm excluding taps, waste, chain and plug and porcelain stopper but including brackets CP waste coupling (flat back or angle back type) any size and 32 mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repair 15 mm dia Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete all as specified and as directed.

S&F in repairs of stop valves 15 mm dia cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, of 15 mm bore pipe complete all as specified and as directed.

S&F in repair of concealed stop cock / angle cock of 15 mm dia chromium plated with long shank and cup washer etc complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with brass union of length 450 mm complete all as specified and as directed.

S&F in repair chromium plated gratings 100 mm dia with provision of with or without hole , fixed with suitable solvent cement complete all as specified and as directed.

S&F Cast iron floor trap of 100 mm size with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F Cast iron nahni trap of 75 mm size with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls for rain water pipe and WC outlet pipe complete all as specified and as directed.

S&F 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls for rain water pipe, spout pipe and wc outlet pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) plain bend complete all as specified and as directed.

S&F of 75 mm PVC (SWR) plain bend complete all as specified and as directed.

Taking down chowkats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as directed.

S & F Aluminium door frame with shutter using powder coated aluminium section 100 x 44 x 2 mm thick for frame / chowkats fixed in existing opening including necessary joining cleats, suitable hold fasts screws etc and fully/partly glazed shutters made with powder coated aluminium section fixed with 100 mm Aluminium butt hinges, section for left and right stiles 84 x 44 x 2 mm, for top rails 84 x 44 x 2 mm, middle and bottom rails 100 x 44 x 2mm shutter including 5 mm thick tinted / frosted glass panels and 12 mm thick particle board for bottom portion inserts with necessary joining cleats, glazing clips rubber packing, aluminium snap beading screws etc fixed and making good to surface of wall and floor to match with the existing surface including 200 mm Aluminium handles on both side and inner side 200mm length tower bolt, for locking device brass mortise locks 4 lever 100 mm size vertical type, rubber gaskets etc, all sections as per manufacture's instructions, frames firmly secured to jambs / soffits with all necessary fittings and fixtures including door clouser hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg complete all as specified and as directed. (Thickness of powder coating not less than 50 micron).

S&F of towel rail 600 mm long "D" type Brass chromium plated fixed with suitable brass screws etc complete all as specified and as directed.

M&L for complete removal of the existing any type of treatment on walls / ceiling surfaces, applying a coat of alkali resistant priming paint followed by applying Birla wall care putty and making the surfaces smooth and even with sand paper and finally applying two coats of oil emulsion distemper complete all as specified and as directed .

M&L for complete removal of existing ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutters exc 1.5 Sqm but not exe 4.00 sqm each (without taking off shutters from the frame) complete all as directed.

S & F powder coated aluminium windows shutters and frame, sliding type, three track without sash bars, including 5 mm thick glass & stainless steel wire mesh aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips ,rubber packing, anodised aluminium snap beading screws etc complete all as specified and as directed. (Powder coating should not be less than 50 micron)

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed.

M&L for 18 mm thick plywood of grade (BWP), type BB fixed with screws as in cup boards / Almirah Shutters complete all as specified and as directed.

M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.

M & L for PVC (edge beading) lipping of suitable width fixed to exposed edges of 18 / 19 mm thick plywood of approved quality and colour to match the laminate sheet fixed with approved adhesive complete all as specified and as directed.

S&F Brass handles, cast type, polished bright 150 mm long complete all as specified and as directed.

S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers complete all as specified and as directed.

S&F Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised complete all as specified and as directed.

S & F of Brass body Magnet with 4 lever fixing for wooden shutter and cabinet box complete all as specified and as directed.

M & L for Mild steel TMT bars 6 mm to 8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for Precast reinforced cement concrete type B-1 mix 1:2:4 using 20 mm graded aggregate as in cover slabs (for manholes) set in cement mortar 1:6 complete all as specified and as directed

S & F stainless steel rectangular type long sink dish washing unit size not less than 1800 mm X 700 mm X 800 mm, bowl size 400 mm X 400 mm X 250 mm and thickness not less than 1.5 mm including necessary fittings and fixtures waste pipe, waste coupling and long sunk Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete all as specified and as directed.

S & F Aluminium door with powder coated aluminium section 100 x 44 x 2 mm thick for frame / chowkats fixed in existing opening including necessary joining cleats, suitable hold fasts screws etc and glazed shutters made with powder coated aluminium section 84 x 44 x 2 mm for styles top and middle rails and 112 x 44 x 2 mm for bottom rails shutter including 5 mm thick tinted / frosted glass panels inserts with necessary joining cleats, glazing clips rubber packing, aluminium snap bearing screws etc including handles tower bolts, mortice locks 4 lever 100 mm size, rubber gaskets etc, all sections as per manufacture's instructions, frames firmly secured to jambs / window cills with all necessary fittings and fixtures etc complete all as specified and as directed. (Thickness of powder coating not less than 50 micron).

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundations, etc. or for shafts, wells, cesspits, manholes, pier holes, drains etc. not exc 10 sq mtr on plan and not exc 1.5 mtr in depth and getting out in hard / dense soil complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred / stopped end etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Removing excavated surplus soil not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed.

S&F two way Bib taps, cast copper alloy chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe fixed in repairs complete all as specified and as directed.

S& F chromium plated Health faucet with 1 mtr flexible tube with holder centre controlled complete all as specified and as directed. Make : Jaquar Cat Part No. ALD-CHR-579 or equivalent in Hindware or Marc as approved by GE.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft / loose soil. complete all as specified and as directed.

M&L for hardcore of gauge not exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and as directed.

M&L for PCC 1:4:8 type D- 2 mix (using 40 mm graded stone aggregate) 75 mm thick as in floor sub base etc complete all as specified and as directed.

M&L for pressed precast concrete interlocking paver block any shape and size conforming to IS 155658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment and including required sand cushing, sealing the edges complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-2 mix (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.

M & L for forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30 mm prmied and sealed with sealing compound, Grade `A' complete all as specified and as directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified.

M&L for 75 mm thick PCC 1:2:4 type B-2 mix using 40 mm graded stone aggregate as in floors finishing concrete surface even and smooth with out using extra cement complete all as specified and as directed

M&L for glass dividing strips 3 mm thick & 28 mm width inserted in position in floors complete all as specified and as directed

M&L PCC (1:2:4) type B1 by using 20 mm graded stone aggregate as in copings / benching etc and making good the surfaces even and smooth without using extra cement etc complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

M&L for Rolled MS Fe 410 Gd E250 in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.connecting with bolts/welding to baseplates etc complete all as specified and as directed.

M&L for MS plates Fe 410 Gd E 250 in roof trusses (framed) trussed, etc connecting with bolts / welding as base plates / connecting plates etc complete all as specified and as directed

M&L for MS bolts and nuts made with hexagonal or square headed one end and screwed the other end and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed

S&F Pre painted galuvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.

S&F Pre painted galuvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide zinc crome primer complete all as specified and as directed.

Removing excavated material exceed 250m but not exceed 500m, depositing where directed at a level not exc 1.50mtr above starting point complete all as specified and as directed

SCHEDULE 'A' PART-II (E/M PORTION) :- M&L for Point wiring with 1.5 Sq mm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth continuty conductor of 1.5 sq mm PVC insulated copper conductor in and including rigid PVC conduit/Casing caping of suitable size with accessories fixed to the surface of the roof/ walls etc., Including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for the for One light point controlled by one one way 5 Amps switch complete all as specified and as directed.

All as per Ser item No 82 above but one ceiling fan / Exhasut fan point controlled by one 5 Amps switch complete all as specified and as directed.

All as per Ser item No 82 above but socket 5 amps on independent board complete all as specified and as directed.

All as per Ser item No 82 above but one 3 / 5 pin socket out let 5 amps on same board with other switches complete all as specified and as directed.

All as per Ser item No 82 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out let controlled by 15 Amps switch complete all as specified and as directed.

Supply and fix switch socket combination 5 A / 15 Amps 5 in 1, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5 Pin 5 Amps, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply & Fixing socket 3 / 5 pin 5 Amp flush type complete all as specified and as directed.

Supply and fix switch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.

S&F surface panel mounted LED tube light fitting 40 watts (2x2) with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable white colour with suitable size complete all as specified and as directed. Make :- LUCKER CAT NO: LKMSRS40 or equivalent make of Crompton / Havells / C&S

S&F indoor hanging light 12 W with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified Make :- LUCKER CAT NO- LHL203/ or equivalent make of Crompton / Havells / C&S

M& L for sub-main wiring with two runs of 6 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor in and including suitable PVC Conduit with 6 sqmm copper earth wire after taking out the existing sub-main wiring etc complete all asspecified and as directed. Note: - 2 runs of cable and one run earth wire and conduit will be measured as one length .

Supply and fix Sheet metal enclosure double door MCB DB SPN 12 way with 200 Amps rated bus bar & neutral link complete all asspecified and as directed.

S&F MCB SPN 6 to 32A, 10 KA rupturing capacity complete all asspecified and as directed.

S&F MCB SP 6 to 32A 10 KA rupturing capacity complete all asspecified and as directed.

Supply & Fixing exhaust fan with plastic body 250 mm sweep, 1440 RPM, Heavy duty single phase 240 Volts, AC 50 Hz and connecting up including louvers and making good with matching colour with the surroundings provision of cable 3 core of size 0.5 Sqmm (16 / 0.2 mm) from ceiling rose to fan , including making necessary opening on stone /brick masonry wall and all as specified and as directed.

S&F Electric water heater storage type (Geyser) 50 Ltrs capacity 5 star rated as per BEE standard having following features:- a) Current leakage protection device b) High precision thermostat control c)Multi functional safety valve d)To withstand 8 bar of water pressure. e)Vitreous enamel coated tank. f)Single weld line tank made out of ultra thick superior cold rolled steel. g) Heavy duty protective Magnesium anode. h) High density CFC free PUF insulation. j) Heating indicator lamp Make: Havells Monza EC / Bajaj

GUTHIKONDA BROTHERS

sri ram construction

M/S NAVEEN BUILDERS

SRI SAINATH ENTERPRISES

M/s RAMA LAKSHMI CONSTRUCTIONS

perfect electricales