Up-gradation of CHC into 50 Bedded Hospital at Indri Distt. Karnal (Pdg. Balance HVAC work)

Amount

[23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm

[23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm

[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

[24.2.7.1]LT CABLE 7.1. Supply and erection of suitable compression type brass cable glands for underground Cable :- Up to 6 Sq mm cable 2 to 4 Core

[24.2.7.2]LT CABLE 7.2. Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core

[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core

[24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm

[24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm

[24.2.8.2]LT CABLE 8.2. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm

[24.2.8.3]LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm

[24.7]RCC FOUNDATIONS FOR DG SET "Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1.8x1.0m)" Unit: per cum

Pdg. And Fixing of wire mesh jali around the transfarmer of size 4` x 8` made out of 75 x 25 x 3.25 mm jali fixed with angel iron frame made out of M.S. Angel 50 x 50 x 6 mm.

Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of 06 Sqmm. 04 core under ground aluminum Ard. cable on surface/ cable tray / pipe / trench etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work makes as per approved make list attached

Supply and erection of 10 Sqmm. 04 core under ground aluminum Ard. cable on surface/ cable tray / pipe / trench etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work makes as per approved make list attached

Supply and erection of 185 Sqmm. 3.5 core under ground aluminum Ard. cable on surface/ cable tray / pipe / trench etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work makes as per approved make list attached

Supply and erection of 240 Sqmm. 3.5 core under ground aluminum Ard. cable on surface/ cable tray / pipe / trench etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work makes as per approved make list attached

Supply and erection of MS angle 50x50x6 mm including cutting, bending to the required shape, drilling hole, carriage Painting, loading, unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (by using steel of TATA / SAIL/RINL (Vizag) make only)

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 6000 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 5500 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 5000 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 3500 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 2500 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 1500 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For AHU 1000 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For FCU 400 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For FCU 600 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For FCU 800 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For FCU 1000 CFM

Supply, installation, testing and commissioning of Bipolar Air Ionizer producing an equal amount of positive and negative oxygen ions to maintain IAQ. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For FCU 1200 CFM

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 125 mm dia.(32 mm thick insulation) - DSR Item No.16.2.7

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100 mm dia.(32 mm thick insulation) - DSR Item No.16.2.8

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.80 mm dia.(32 mm thick insulation) - DSR Item No.16.2.9

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 65 mm dia.(32 mm thick insulation) - DSR Item No.16.2.10

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 50 mm dia.(32 mm thick insulation) - DSR Item No.16.2.11

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 40 mm dia.(32 mm thick insulation) - DSR Item No.16.2.12

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 32 mm dia.(32 mm thick insulation) - DSR Item No.16.2.13

Insulated Chilled / Hot Water Piping (DSR: Item No.-16.2) Supplying, laying/ fixing, testing Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 25 mm dia.(32 mm thick insulation) - DSR Item No.16.2.14

INSULATED VALVES (DSR: Item No.-16.7) Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled / Hot water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal and O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified - DSR Item No.16.7.1 100 mm dia - DSR Item No.16.7.1.4

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled / Hot water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal and O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified - DSR Item No.16.7.1 50 mm dia. - DSR Item No.16.7.1.7

Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified - DSR Item No.16.7.4 100 mm dia. - DSR Item No.16.7.4.4

Pressure Gauge -DSR: Item No.-16.8 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required.

Thermometer - DSR: Item No.-16.9 Providing and fixing in position the mercury in glass industrial type thermometers.

Supply, Installation, testing and commissioning of auto air vent valve with cock or ball valve of 25mm size

Supply, Installation, testing and commissioning of Ball valves(full open port type) threaded type BSPT internal without Strainer complete with heavy duty PN16 bronze forged body, chrome plated bronze ball etc.and as specified in standard specification 40 mm dia.

Supply, Installation, testing and commissioning of Ball valves(full open port type) threaded type BSPT internal without Strainer complete with heavy duty PN16 bronze forged body, chrome plated bronze ball etc.and as specified in standard specification 32 mm dia.

Supply, Installation, testing and commissioning of Ball valves(full open port type) threaded type BSPT internal without Strainer complete with heavy duty PN16 bronze forged body, chrome plated bronze ball etc.and as specified in standard specification 25 mm dia.

DUCTING, GRILLES and INSULATION WORKS Factory fabrication GSS Duct - DSR: Item No.-16.12.1 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet (24 Gauge) - DSR Item No.16.12.1.1

Supply, Installation,testing and commissioning of Ball valves(full open port type) threaded type BSPT internal with Strainer complete with heavy duty PN16 bronze forged body, chrome plated bronze ball etc.and as specified in standard specification 25 mm dia.

Site fabrication GSS Duct - DSR: Item No.-16.12.2 Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet (24 Gauge) - DSR Item No.16.12.2.1

Site fabrication GSS Duct - DSR: Item No.-16.12.2 Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet (22 Gauge) - DSR Item No.16.12.2.2

Duct External Insulation Supply , installation, testing and commissioning of duct insulation of closed cell Elastomeric foam, based on synthetic rubber with reinforced aluminium foil facing laminated with 12 microns aluminium foil of below mentioned thickness as per specifications and as required. 13 mm (For Supply Air Duct)

POWER and CONTROL CABLING Supply and laying of CONTROL CABLE 1.1 kV grade armoured XLPE insulated and sheathed copper conductor cables of sizes below, on existing cable trays including terminations with suitable clamps, saddles, hooks, bolts etc. complete as per specifications and as required. 4C X 1.5 Sq.mm

AIRMOD SOLUTIONS PVT LTD