Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.9 L+₹1.6 L (3.97%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹42.9 L+₹1.7 L (4.06%)Rejected-AOC 728 1 JOGIWARA VISHAVKARMA MANDIR ROAD AMBALA CITY | AMBALA CITY | AMBALA | HARYANA | 134003 | L3 | Rejected-AOC L3 | |
| 4 | L4₹47.9 L+₹6.6 L (16.0%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹44.4 L
EMD Value
₹88,880
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
ADDN/ALTN/IMP TO DSC BILLETS AND CERTAIN REVENUE AND MINOR WORKS AT AF STATION HAKIMPET UNDER GE (AF) HAKIMPET
2022_MES_556806_1
8444/E8
Open Tender
Civil Works
Item Rate
180 days
hakimpet
As per NIT
6 documents required · 6 mandatory
₹500
GE (AF) HAKIMPET
₹88,880
Yes
12 Dec 2022
10 Oct 2022
9 Nov 2022
10 Oct 2022
7 Nov 2022
24 Oct 2022
Amount
Demolition of cement concerte in ground floors and paving n exc 15 cm thickness (below or above ground level )unreinforced concrete and removed debris outside MD land.
M&L 25mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in levelling concrete as specified and directed by Engineer In charge.
Material and labour for for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.
Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar and removed debris outside MD land.
Material and labour for for Digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd.
S & F in repair for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed)
S&F in repair vitreous China wash hand basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.
S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including white seat cover for pedstal pan complete.
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S&F in repair 15 mm bore fancy concealed type,Stop valves,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union (100 mm)
S&F in repair 15 mm bore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, .
S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.
S&F in repair 15 mm bore fancy type health faucet with SS hose complete all as specified 600 mm length.
S&F in repairTubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.
Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete
Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors in repairs including concealed piping after cutting in brick work masonry walls where ever required complete inlcuding removing old u/s pipes all as specified and directed.
All as per item above but 20mm dia.
S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F PVC (SWR)110mm pipes single socketed in any length with rubber ring joints fixed to walls
S&F PVC (SWR) bends of 110mm bore
S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal
S&F PVC (SWR) vent cowl of 110mm bore
S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement
S&F PVC (SWR) 'P’ trap
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in platforms, urinal partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.
M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and directed
M&L for rendering to brick masonry surfaces 15mm thick in cement mortar 1:4, complete all as specified and directed
Dismantling 500 Ltrs capacity water tanks and removing to store
S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed (ISI marked).
S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each
Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each
Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge
S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
M&L Powder coatedAnodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L Powdercoated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified
M&L Pressed steel frames125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
M&L Flush shutters,30mm thck solid core construction, with block board core and plywood face panels, commercial type on both sides
M&L three coats of white wash over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified.
M&L one coat of white wash including preparation of old decorated surfaces of ceiling complete all as specified.
M&L Complete removal of existing treatment on walls and applying 3mm thick wall care putty on wall including applying two coats of oil bound distempering walls complete all as specified and directed.
M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F sinks with drainage board made of 304 grade stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm Make : Bluestar/Nirali/Prayag
Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil
M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.
Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface
M&L 100mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Laid in flooring as specified and directed by Engineer In charge.
S&F Steel work as in tubular / L post trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new steel surfaces of any description complete all as specified.
S&F Fe 410 -W (Gde- E- 250) quality- A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment fixing with riveted, bolted or welded attachmentcomplete all as specified and directed
S&F mortise lock both side operational suitable for steel gate with minimum 2 leavers and 2 keys.
S&F Mild steel sliding door bolts 375mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
M&L for rendering to brick masonry surfaces or surfaces 10mm thick in cement mortar 1:6, complete all as specified and directed
M&L 3mm thick wall care putty on newly plastered wall surfaces and applying distempering two coats wht oil boudn distemper all as specifed and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed and removed debris ouside MD land
M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) tomatch the existing floors
M&L PCC type B- 2, 1:2:4 (40mm graded stone aggregate ) as in sub base levelling concrete finished fair surfaces
M&L Machine cut kota stone slab flooring 20-25mm thick overScreed bed or bedding layer of mortar CM(1:6) 15 mmthick for laying floor finishes laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as direcetd.
S&F Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).
Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms)
Swivel shower of PTMT any colour forfixing with 15mm pipe. (Minimum weight40gms)
S&F PTMT Tubular towel rail, 20mmdia, D type, 60cm long between flanges and fixed in repairs all as specified and directed.
S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.
M&L PCC 1:2:4 for fixing rifle racks including making holes, fixing with nut bolt and packing with PCC. complete all as specfied
M&L excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed.
Cement concrete 1:4:8 Type D2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for reinforced concrete pipes, class NP3 150mm size, laid and jointed complete with collars, complete all as specified and directed
Returning, filling in, including spreadin, levelling, watering and well ramming in layers not exceeding 25 cm in hard/ dence soil, complete all as specified and directed.
Removing excavated soild to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5 km above the starting point, complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 including all necessary form work, complete all as specified and directed.
S&F Bird proofing mesh made of 'Antibird net UV black in colour made of material polyolefin all weather proof co- polymer of machine knotting using CNC machines with DSLS technology for anti slip knotting , heat setting should be steam set for greater dimensional stability and knot firmness and diameter of the twine is 1mm and the size of mesh 25mm X 25mm (+/- 2mm) and should achieve twine breaking strength of 16 kgf minimum and MBS (mesh breaking strength) 12 kgf and KBS ( Knot breaking strength) 22 kgf minimum fixed complete all as per manufacturers instruction and as directed. Note:- Bird proofing arrangement shall be carried out in ceiling and entrance door pully based with suitable dia nylon rope for ups and down pulling type all as per existing type. The pullys shall be fixed at height of above 10 mtr all as directed and as per manufacturer's instructions including removing existing net if present and also include scaffolding ladder safety arrangement etc all as specified. Note: Pully shall be measured seperately. Make: LEO Technova India or as approved by GE.
Supply only MS pulley heavy grade of 100 mm dia
Excavating over areas, n exc1.5 m deep and getting out in hard dense soil
Excavating over areas, exc 1.5 m and n exc 3m deep and getting out in hard dense soil
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 ( 20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed
Mild steel screw bolts 16-20mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm longbut n exc 10cm long
M&L Pre-cast cement concrete block masonry with solid blocks,of PC 1:3:6( type C1) exc. 10 cm in width and setting in mortar1:6, complete all as specified and directed
M&L for rendering to brick masonry and concrete surfaces 15mm thick in cement mortar 1:4, complete all as specified and directed
Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.
M & L for Point wiring on surface conduit with 1.5 Sq mm copper conductor single core PVC insulated FRLS 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified and directed for
(a) One light point controlled by one, one way switch 5A, SP
(b) One ceiling fan point controlled by one, one way switch and regulator
(c) One 2/3 pin 5 Amps socket outlet point controlled by one switch on the same board
(d) One 3 Pin 5 Amps switch socket Independent board
(e) one light point controlled by two way switch
All as per ser item here-in-before but for one 16 Amps switch socket combination on independent board with 4 sqmm FRLS cables for phase and neutral and 4 sqmm FRLS cable green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. .
M&L cutting grooves of brick walls making good to match with existing surfaces for concealing conduit/pipe.
Supply and fix switch piano flush type 5 Amps, one way complete all as specified and directed.
Supply and fix switch piano flush type 5 Amps, Two way complete all as specified and directed.
Supply and fixing socket outlet 2/3 pin (5 pin) multi purpose 5 Amp flush type complete all as specified and directed by Engineer-in-Charge. .
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed.
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed by Engineer-in-Charge. .
Supply an fix stepped type electronic ceiling fan regulator flush type suitable for 230V 50Hz Ac Supply complete all as specified and directed by Engineer in charge
Supply & fixing wall mounted LED batten, with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 10W LED (2ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:-Havells /Philips/CG.
Supply & fixing wall mounted LED batten fittings with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 22W/20W/18W LED (4ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:-Havells / Philips/CG.
Supply and Fix 3 Watt Bed side Led light for study purpose suitable for working on 230 Volts 50 HZ Complete all as specified and all as directed by Engineer in charge.
Supply and fix heavy duty exhaust fan Copper wound with metal body, metal frame & metal blades of size 300mm sweep, 1200 RPM suitable for working on single phase, 230 volts, 50 Hz AC supply complete including suitable nuts & bolts and connecting cable from ceiling rose to exhaust fan Complete all as specified and all as directed by Engineer in charge.
M&L for cutting round holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete of superficial of 300 mm dia and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for exhaust fan opening complete all as specified and directed by Engineer-in-Charge.
S & F louvers with suitable frame work and fixing arrangements for exhaust fan of size 300 mm sweep complete including removing the existing unserviceable one complete all as specified and directed by the Engineer-in-Charge.
Disconnecting and removing ceiling fan/Exhaust Fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and directed by Engineer-in-Charge. NOTE :- (1) Necessary repairs/ replacement of unserviceable parts shall be measured and paid seperately.(2)Labour element for replacing of u/s parts deemed to be included in rate quoted.
Material and labour for rewinding of the ceiling fan/exhaust fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire. Note: old winding material is property of the contractor
Supply only the following items suitable for ceiling fans / exhaust fans of any size and sweep and make :-
(a) Capacitor 2.5 Mfd capacity 240 Volts.
(b) Sealed ball bearing
(c) Rubber bushes with MS clamps,nut,bolts &spilt pins
S & F Vertical type TPN DB 4 way double door with incoming as MCCB TP 63 to 100 Amps as required suitable for 415 volts,16 KA AC 3 phase 50 Hz and suitabe for outgoing SP/TP with isolated neutral bar including provision of MCCB as required at site etc complete all as specified and directed by Engineer in Charge
Supply and fix MCB distribution board single door type, SPN 8 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. Complete all as specified and directed
SSupply and fixing MCB SPN Ç'curve 240/415 volts ISI marked tested at CPRI breaking capacity of 10 KA , 40 Amps capacity, complete all as specified and directed.Make - L&T/Legrand/ABB or equivalent.
Supply and fix MCB, SP, 'C' curve, 6 - 32 Amps, 10 kA ISI marked suitable for 415/240 volts operation, tested at CPRI , complete all as specified and directed.Make - L&T/Legrand/ABB or equivalent.
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN 25 to 63 Amps current carrying capacity in the DB complete all as specified and directed by Engineer in Charge.
M & L for Submain wiring with four single core 6 Sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:- Four runs of cable + two run of earth contuinity conductor + one run of conduit shall be measured and paid as one unit length complete all as specified and directed by Engineer-in-Charge.
M & L for Submain wiring with two single core 4.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running 4.0 Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note: Three runs of 4 Sqmm copper cable and one run of PVC conduit will be measured as one unit length.
Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal IP 65/66 protection complete including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engineer-in-Charge.
S & F bracket for security light made out of GI pipe 40 mm dia bore (light grade)not less than 1.2 mtr long and fixed on walls/poles with 2 nos MS clamps made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc complete all as specified and directed by Engineer-in-Charge
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate)
Supply, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade, 16 Sqmm 2 Core, laid in trenches/ducts, floors, fixed to pole/ walls etc. complete all as specified and directed by the Engineer-in-charge.
Excavation in trenches any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed by Engineer-in-Charge including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as directed. Note : Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.
Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.
M&L for river sand for cable cushioning to under ground cable protection, complete all as specified. (Excavation and earth work will be measured separately) punned thickness shall be measured.
M&L burned bricks for cover to underground cable with using sub class 'B' bricks (Old size) laid flat across the cable complete all as specified.
S&F Energy saving, environmental friendly, long life , Exlusive innovative die -cast aluminium IP65 flood light luminair with high power LED as light source 60 W LED 4000K with1.5 sqmm 3 core copper/aluminium conductor cable all as specified and directed by Engineer-in-Charge. Make : Bajaj cat part No BJFL 60W LED or equivalent in Crompton Greaves /Wipro/Philips/Havells.
Supplying and fixing in position new PVC (Sinthetic) boxes of size 280mm X 170mm X 115mm depth. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens/Havells and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5 mm GI clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge. Note :- The contractors quoted rates for the above items are deemed to include for fixing the Sinthetic box in position with suitable MS clamps and/or necessary PCC as per site requirement.
Supply, Installation, factory made LT Feeder Pillar Box of Size 60CMx45CMx30CM for SPN, 2 Wire, 240 Volts, AC, 50 Hz, Outdoor, Cubical Type, Weather, Dust and Vermin proof, Pedestal mounting type, front operated applications having size of Aluminium bus bar rating capacity 200 Amps and neutral 150 Amps rating capacity mounting of insulators,with one SPN MCB 63 Amps as incommer, canopy on top and gland provision in the bottom made out of 3 mm thick MS sheet duly powder coated of approved shade with using 40mmX40mmX6 mm angle iron frame and supports including necessary excavation and grouting work in PCC 1:2:4 Mix, Type B1 complete all as specified and directed. Make : Asian Switchgear Kanpur/ Shalabh Switchgear/universal Switchgear Control or CPRI approved as approved by GE.
Supplying & fixing PVC insulated, served with inner sheathed pvc tape weatherproof stranded Alumunium conductor cable twin core 6 Sqmm size for connecting from Over head conductor to street light fittings with connector etc complete all as specified and directed by Engineer-in-Charge.
M & L in Replacemant rusted pipe & jointing GI water tubing, 40 mm bore,light grade as in sleeving etc laid in trenches / ducts / horizontal bore hole/ on Pole/ surface for cable protection complete all as specified and directed by Engineer-in-Charge. (MAKE : TATA/JINDAL/TT SWASTIK)
Disconnecting and removing existing ceiling fan of 1200/1400 mm sweep from any height dismantaling blades and shifting to AGE E/M store complete all as specified and as directed
Material and labour for surface point wiring with 1.5 sq mm PVC insulated unsheathed multistranded single core copper conductor FRLS,ISI marked with and including stove enamelled steel conduit ,ISI marked with all acessories such as junction box (recessed) ,Tees,elbows etc and 1.5 sq mm PVC insulated unsheathed multistranded single core copper conductor FRLS ,ISI marked cable as earth continuity conductor for one light point/exhaust fan point controlled through flameproof rotary switch complete all as specified and as directed by Engineer in charge
Supply and Fixing LED light fitting 2X16 watt flame proof,CMRI certified recommended for gas vapour group of IIA & IIIB,Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tubelight fixtures driver,holders,connector etc.complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer in charge Make: Sudhir or equivalent.
Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed or surface mount type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling or on ceiling surface as per site condition including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-charge
S&F switch flame proof rotary type with termination box in LM6 16A single pole 250 V, complete all as specified and directed by Engr-in-charge
S & F Switch piano type single pole one way flush type 5A cap. 230V
S & F ceiling rose three terminal surface bakelite type AC 230V of size 65x50 mm complete all as specified
Supply and fix Sheet metal enclosure MCB DB SPN 04 way with 200 amps Busbar 240 volts double door withflush type system complete all as specified
Supply and fix MCB SPN 40 Amps suitable for fixing in MCB DB
Supply and fix MCB SP 6-32 Amps Suitable for fixing in MCB DB
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by engineer in charge
M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.
M/s D.Krishna Varma
Saiansh Associates
VACON INFRASTRUCTURES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .