Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAdmitted-Finance JAIN SADAN MAHAL ROAD SHIVPURI DISTT SHIVPURI MP | SHIVPURI | SHIVPURI | MADHYA PRADESH | L1 | Admitted-Finance | |
| 2 | L2₹41.4 L+₹58,583 (1.44%)Admitted-Finance 13 P N DOGRA MARKET GOLE MARKET UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Admitted-Finance | |
| 3 | L3₹45.0 L+₹4.2 L (10.4%)Admitted-Finance 53 HOUSING BOARD COLONY PHASE II UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | J K | 182101 | L3 | Admitted-Finance | |
| 4 | L4₹46.0 L+₹5.2 L (12.8%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹46.1 L+₹5.3 L (12.9%)Admitted-Finance BIR SARDALIA RESIDENCY AIR FORCE ROAD BARYAL UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | anil construction co. L1 | VARDHMAN INTERNATIONAL L2 | JOGINDER SINGH L7 | ATUL TRADING CO L9 | M/S M P Construction Co L6 | SARDALIA CONST CO L5 | M/s Vibrant Consultant L10 | M/S SACHKHAND ROAD SERVICE L4 | M/S MAHALUXMI BUILDERS L8 | vijay kumar gupta and co L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed by Engr-in-Charge. | 20 | RM | 5 ₹100 Lowest | 10 ₹200 | 50 ₹1,000 | 10 ₹200 | 50 ₹1,000 | 25 ₹500 | 34.5 ₹690 | 50 ₹1,000 | 50 ₹1,000 | 12 ₹240 |
| 2.00 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed by Engr-in-Charge. | 20 | RM | 40 ₹800 | 50 ₹1,000 | 100 ₹2,000 | 20 ₹400 Lowest | 50 ₹1,000 | 75 ₹1,500 | 47 ₹940 | 50 ₹1,000 | 80 ₹1,600 | 52 ₹1,040 |
| 3.00 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge. | 20 | RM | 200 ₹4,000 | 180 ₹3,600 | 220 ₹4,400 | 100 ₹2,000 Lowest | 150 ₹3,000 | 220 ₹4,400 | 140 ₹2,800 | 200 ₹4,000 | 200 ₹4,000 | 182 ₹3,640 |
| 4.00 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete all as specified and directed by Engr-in-Charge.
Make : Commander, CERA, Pearl, Parryware Slimline | 5 | Each | 1,200 ₹6,000 | 950 ₹4,750 Lowest | 1,050 ₹5,250 | 1,000 ₹5,000 | 1,000 ₹5,000 | 1,100 ₹5,500 | 990 ₹4,950 | 1,200 ₹6,000 | 1,000 ₹5,000 | 955 ₹4,775 |
| 5.00 | S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed by Engr-in-Charge. | 20 | Each | 90 ₹1,800 Lowest | 120 ₹2,400 | 150 ₹3,000 | 100 ₹2,000 | 150 ₹3,000 | 160 ₹3,200 | 140 ₹2,800 | 200 ₹4,000 | 150 ₹3,000 | 125 ₹2,500 |
| 6.00 | S & F for 5 mm thick glass Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats, complete all as specified and directed by Engr-in-Charge.
Make : Prayag, L&K, Shakti, Coronet. | 20 | Each | 600 ₹12,000 | 700 ₹14,000 | 750 ₹15,000 | 350 ₹7,000 Lowest | 750 ₹15,000 | 750 ₹15,000 | 475 ₹9,500 | 900 ₹18,000 | 800 ₹16,000 | 710 ₹14,200 |
| 7.00 | S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union, complete all as specified and directed by Engr-in-Charge.
Make : Prayag, Pumber, Mark. | 10 | Each | 600 ₹6,000 | 650 ₹6,500 | 700 ₹7,000 | 350 ₹3,500 Lowest | 650 ₹6,500 | 650 ₹6,500 | 438 ₹4,380 | 750 ₹7,500 | 750 ₹7,500 | 660 ₹6,600 |
| 8.00 | Dismantling /cutting of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed by Engr-in-Charge. | 40.2 | 10 Sqm | 60 ₹2,412 Lowest | 500 ₹20,100 | 600 ₹24,120 | 500 ₹20,100 | 550 ₹22,110 | 580 ₹23,316 | 600 ₹24,120 | 600 ₹24,120 | 600 ₹24,120 | 510 ₹20,502 |
| 9.00 | M&L for 18-20 mm thick machine cut granite (of any type )and in any colour work (table rubbed & polished) in floor, steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed by Engr-in-Charge. | 402 | Sqm | 3,000 ₹12,06,000 | 1,700 ₹6,83,400 Lowest | 1,800 ₹7,23,600 | 3,600 ₹14,47,200 | 1,800 ₹7,23,600 | 1,800 ₹7,23,600 | 3,100 ₹12,46,200 | 1,850 ₹7,43,700 | 1,800 ₹7,23,600 | 1,710 ₹6,87,420 |
| 10.00 | Treatment of Floor joints : All stone shall be cut to open the expansion joint remove all the malba to reach the parent slab. Clean the surface with wire brush to remove all the dust. PCC shall be done to raise the level of Expansion joint to fix the Aluminium section. Providing BIZZER -426-ALR-100, base mounted seismic Expansion joint cover made from aluminium of Grade T-6 for floor-to-floor expansion jonts at VDF areas subjected to Fork Lifter movement. Movement capacity (+/-50%) system must have aluminium side frames of 2mm thickness and width 50mm each centerplate multy layer mechanism of total thickness 13mm total sightline 200mm and profile 3000mm height of he system should be 27 mm including GI sheet/aluminium sheet | 670 | RM | 4,100 ₹27,47,000 Lowest | 4,900 ₹32,83,000 | 5,600 ₹37,52,000 | 5,000 ₹33,50,000 | 5,600 ₹37,52,000 | 5,500 ₹36,85,000 | 5,350 ₹35,84,500 | 5,500 ₹36,85,000 | 5,800 ₹38,86,000 | 5,410 ₹36,24,700 |
Tender Value
₹50.0 L
EMD Value
₹1 L
Closing Date
10 Jan 2026, 6:00 pmClosed
GE (Utilities) Udhampur
GE (Utilities) Udhampur Po-Garhi Pin-182121
Certain B/R maint works of Main Hospital building, Crumple joints and Other connected works at CHNC under GE (Utilities) Udhampur
2025_MES_745535_1
GE/U-88/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹1 L
19 Jan 2026
20 Dec 2025
12 Jan 2026
20 Dec 2025
10 Jan 2026
3 Jan 2026
Amount
Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed by Engr-in-Charge.
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed by Engr-in-Charge.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete all as specified and directed by Engr-in-Charge. Make : Commander, CERA, Pearl, Parryware Slimline
S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed by Engr-in-Charge.
S & F for 5 mm thick glass Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats, complete all as specified and directed by Engr-in-Charge. Make : Prayag, L&K, Shakti, Coronet.
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union, complete all as specified and directed by Engr-in-Charge. Make : Prayag, Pumber, Mark.
Dismantling /cutting of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed by Engr-in-Charge.
M&L for 18-20 mm thick machine cut granite (of any type )and in any colour work (table rubbed & polished) in floor, steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed by Engr-in-Charge.
Treatment of Floor joints : All stone shall be cut to open the expansion joint remove all the malba to reach the parent slab. Clean the surface with wire brush to remove all the dust. PCC shall be done to raise the level of Expansion joint to fix the Aluminium section. Providing BIZZER -426-ALR-100, base mounted seismic Expansion joint cover made from aluminium of Grade T-6 for floor-to-floor expansion jonts at VDF areas subjected to Fork Lifter movement. Movement capacity (+/-50%) system must have aluminium side frames of 2mm thickness and width 50mm each centerplate multy layer mechanism of total thickness 13mm total sightline 200mm and profile 3000mm height of he system should be 27 mm including GI sheet/aluminium sheet
S & F in repair for 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed by Engr-in-Charge.
S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed by Engr-in-Charge.
S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked, complete all as specified and directed by Engr-in-Charge.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked), complete all as specified and directed by Engr-in-Charge.
S&F in repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete all as specified and directed by Engr-in-Charge.
S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge.
S&F CP grating 125mm dia without waste hole, complete all as specified and directed by Engr-in-Charge.
S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia, complete all as specified and directed by Engr-in-Charge.
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples or necessary welding works for MS windows,door and wooden door etc, complete all as specified and directed by Engr-in-Charge.
S & F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and directed by Engr-in-Charge.
S & F in repair for door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium extruded sec body , complete all as specified and directed by Engr-in-Charge.
S & F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm, complete all as specified and directed by Engr-in-Charge.
S&F in repairs 4.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane in any location and height incl hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete, complete all as specified and directed by Engr-in-Charge.
Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge.
M & L providing and fixing of false ceiling with power coated exposed GI grid suspension system (E-grid T-2420 of Everest or equivalent having load carrying capacity of 12.5 Kg/M3 with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200/600 mm long and Wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall with steel screws with distance 300mm c/c. The main runners to be placed @ 1200 mm, the cross tee 1200 mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200x 600mm. Additional cross tees of 600 mm shall be placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600 mm x 600 mm with and including 6 mm thick HSPC (High pressure steam cured) oceanic pre primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4 mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 kg/clip), hold down clips (wt-0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.
VARDHMAN INTERNATIONAL (BID ID -3520677)
vijay kumar gupta and co (BID ID -3520662)
M/S SACHKHAND ROAD SERVICE (BID ID -3521296)
SARDALIA CONST CO (BID ID -3520694)
M/S M P Construction Co (BID ID -3521263)
JOGINDER SINGH (BID ID -3521221)
M/S MAHALUXMI BUILDERS (BID ID -3521366)
ATUL TRADING CO (BID ID -3519025)
M/s Vibrant Consultant (BID ID -3520637)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_834805.xls
BOQ • 0.34 MB
TENDER88.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .