Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.2 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹49.2 L+₹1.9 L (4.11%)Rejected-Finance PO PS RUPA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 003 | WEST KAMENG | ARUNACHAL PRADESH | 790003 | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGH BID VALUE | |
| 3 | L3₹49.4 L+₹2.2 L (4.72%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGH BID VALUE | |
| 4 | L4₹49.5 L+₹2.2 L (4.75%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGH BID VALUE | |
| 5 | L5₹49.6 L+₹2.4 L (5.13%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGH BID VALUE |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
30 Jul 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, PIN-913859, C/O 99 APO
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT TENGA AREA OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_536953_1
8342/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
AS SPECIFIED IN TENDER DOCUMETNS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹93,000
Yes
27 Aug 2022
9 Jul 2022
1 Aug 2022
9 Jul 2022
30 Jul 2022
23 Jul 2022
Amount
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rocks, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
Excavation over area n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
M&L for 75mm PCC 1:3:6 type C-2 using 40mm garded aggregates as in subbase for floor.
M&L for 40mm PCC 1:3:6 type C-2 using 40mm garded aggregates as in subbase for floor.
M & L for PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in surface channels and drains including necessary formwork complete all as specified and directed.
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks 10 cm thick and setting in CM 1:4 etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
S&F equal angles, tees, beams and channels of steel in roof trusses (framed) trussed, purlin, rafters, plates, crane, granties, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat section) complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for providing pre-cast RCC (1:2:4) type 'B-1' using (20 mm graded crush stone aggregate) as in cover slabs of manholes and similar location including necessary form work and set in cement mortar (1:4) complete all as specified and directed.
M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6, type C-1, stonte masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6 mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in drawing ED-2007 and as directed.
M&L for construction of 1.20 m dia x 3.00 m deep sokage well , excavation in hard/ dense soil, foundation PCC 1:3:6 wells of honey combed precast PCC block wall masonary including intercepting chambers, RCC cover slab, filling with brick bats complete all as specified in drawing and as directed.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 160 mm on after they are laid and tested complete all as specified and directed.
M&L for 150mm dia SGSW pipes 150mm dia grade A laid in trenches and jointed in CM 1:1 including pipes laid on PCC bed, packing undr and haunching against sides complete all as specified and directed. Note : Earthwork, PCC bed and PCC haunchings shall be measured and paid separately.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed. Make : Prestar/ JSW/ Dyna Roof/ Dura Roof
S&F Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in ridges fixed with self tapping screws as specified and directed complete all as specified and directed. Make : Prestar/ JSW/ Dyna Roof/ Dura Roof
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and fixing plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80 mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.
M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparing new steel surfaces to receive painting of any description over 10cm width or girth complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation and well ramming complete all as specified and directed.
M&L for machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.
S&F 3 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in subbase for floorings complete all as specified and directed.
Material and Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. (Screed Bed shall be measured and paid separately).
M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floorings including finishing the surface even and smooth w/o using extra cement complete all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.
M&L for 20 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.
Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in beams, plinth beams, cantilever, bressummers, lintels over 1.5m span etc complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in footings complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, all as specified and directed.
S&F Mild steel TMT bars 6 to 8 mm dia., as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide add for fair finished surface complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete finished rough to receive tiles complete all as specified and directed.
M&L Glazed coloured ceramic tiles (450 x 350) x 6 to 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
Material and labour for 20 mm thick granite work (table rubbed and polished) in steps and cooking platform and like over 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to wall surface etc complete all as specified and directed.
S&F 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in roof kerbs or mud stops or plinth wall rounded or chamfered on edges, coping, in benching etc including necessary formwork complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Taking down Chowkhats or frames n exc 1.5 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
M&L for second class clean sawn hard-wood in scantlings in framed work complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 30 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 415-0 or Grade -E complete all as specified and directed.
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 75mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F pre coated mild steel floor door stopper tongue anodised 140mm length including vulcanised rubber piece complete all as specified and directed.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm , bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F bib tap chromium plated cast copper alloy, fancy type, 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S & F chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S & F chromium plated 15mm dia angle stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed
S&F solid PVC Door Frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
Supply and fixing vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete.
S&F 10 litres PVC, valveless, syphonic action type, flushing cistern low level, white with inlet ball walve float chain and pull and bracket complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal provide with access door 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore.
S&F PVC (SWR) WC connector 110 mm bore with lip ring complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F PVC (SWR) bends 75 mm bore of any radius with access doors complete all as specified and directed.
S&F brass chromium plated towel rail 60 cm long of 20 mm dia , D type, fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed(Make: Hindware/Parry) complete all as specified and directed.
S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.
S&F fancy type, cast copper alloy, with capstan heads, chromium plated pillar tap for WHB screwed down for iron pipes of 15mm bore complete all as specified and directed.
S&F Vitreous China urinals, bowl type (back or corner wall type), size of 465x355x265 mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.
Supply and fix Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Supply and fix PVC water storage tanks of 500 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20 mm dia complete all as specified and directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C-1 ( using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturbed surface/ portion of the wall etc. complete all as specified and directed.
Material and Labour for Point wiring with 1.50 sq mm (nominal area), two single core PVC insulated unsheathed , 1100 volts grade, multi-stranded copper conductor FRLS Grade, in and including PVC casing capping with accessories with teak wood boxes and 3 mm thick plastic laminated sheet top cover size with all fittings and accessories including MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer for housing/mounting brackets switches,sockets etc, including PVC insulated unsheathed single core multi-stranded copper conductor FRLS Grade cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light/point controlled by one way switch complete all as specified and directed.
All as per item No 112 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed
All as per item No 112 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.50 sqmm 1100 volts FRLS grade and earth continuity wire 2.50 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
All as per item No 112 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
S&F switch socket combination multipurpose 5/6 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch socket combination multipurpose 15/16 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch piano flush type SP, one way, 5 Amp , 240 Volts complete all as specified and directed.
Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmx75mm for mounting the fittings complete all as specified and directed.
Supply and fixing 1x10 W LED lamp complete all as specified and directed. Cat No. LHLDEUEEML8RO10 of Make Havells or equivalent model of Make as specified in CA.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230 V, PF not less than 0.85 (min) complete all as specified and directed.
S&F LED lights fittings 01x18 watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED lights fittings 1x9/ 1x10 watt, 220 V, AC bulkhead luminaire incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F PVC rectangular block for mounting DB's with 3mm plastic laminated sheet cover of size 25cmx20cmx5cm complete all as specified and directed.
S&F PVC rectangular block for mounting DB's with 3mm plastic laminated sheet cover of size 17.5cmx10cmx5cm complete all as specified and directed.
S&F sheet metal enclosure for DBs when MCBs to be used single pole and neutral 2 way, single door with 200 Amps rated bus bar, 240 volts fixed sunk/ flush to the wall or in niche complete all as specified and directed.
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 8 way with 200 Amps rated bus bar complete all as specified and directed.
Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed.
S&F MCB SP&N , 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
S&F MCB SP&N , 35-60 Amps, 240 volts, 'C' series, complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section, 4 core, multi stranded conductor in service connections complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty 10 Sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.
Supplying and fixing 1100 volts grade heavy duty 6 Sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.
S&F exhaust fans made of sturdy Engg plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of 250 mm sweep. Make : Bajaj/ C&G/ Havells/ Philips
S&F exhaust fans made of sturdy Engg plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of 300 mm sweep. Make : Bajaj/ C&G/ Havells/ Philips
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion complete all as specified and directed.
M/S R D TRADERS
M/S ASHOK CONSTRUCTION
M/S SM ANSARI
M/S N D ENTERPRISE
M/S SUNRISE CONSTRUCTION AND CO
M/S YOGENDRA CONSTRUCTION CO
M/S G JEBISOW ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .