SPECIAL REPAIR TO OR MD ACCN BLDG NO P-64 KV VIHAR (EAST) AND BLDG NO P-25 (OFFRS ACCN) AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

B&R PORTION:- Rendering 15 mm thick in CM 1:6 on brick wall surface or concrete surface finished even and smooth without using extra cement including all necessary scaffolding, complete all as specified and directed.

Rendering 15 mm thick in CM 1:4 on fair faces of brick wall surface or concrete surface finished even and smooth without using extra cement including mixing of water proofing compound (WPC shall be measured and paid separately) including all necessary scaffolding, complete all as specified and directed.

Rendering 10mm thck in CM 1:3 as in ceilings and similar items finished even and smooth without using extra cement upto any height including all necessary scaffolding, complete all as specified and directed.

Supply only Water proofing admixure liquid.(Make: Dr Fixit or equivalent as approved by GE)

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

100 mm CI floor trap with grating including jointing to waste pipe with cement concrete type B-1, (1:2:4) and taking down the existing one complete all as specified.

75 mm CI floor trap with grating including jointing to waste pipe with cement concrete type B-1, (1:2:4) and taking down the existing one complete all as specified.

100 mm cast iron sanitary connection socket to fit wc outlet, complete all as specified.

100 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, laid in trenches or in floors in repairs, complete all as specified.

100 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, fixed to wall in repairs, complete all as specified.

50 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, fixed to wall in repairs, complete all as specified.

100 mm cast iron sanitary connections- short connections pipe of lenth upto 300 mm, complete all as specified.

75 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, laid in trenches or in floors in repairs, complete all as specified.

75 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, fixed to wall in repairs, complete all as specified.

100 mm CI bends (any radius) diminishing pieces or taper (larger bore measured) with oval access doors Make ISI marked, complete all as specified.

75 mm CI bends (any radius) diminishing pieces or taper (larger bore measured) with oval access doors. Make ISI marked, complete all as specified.

CI cowls 50 mm Make ISI marked, complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Refixing old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Refixing old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

15 mm dia bib tap with flange, cast brass chromium plated fancy type screwed for iron pipes with crutch or butterfly handle fixed in repairs, complete all as specified and directed. Make:-Prayag cat part No-7206 or Equivalent cat part of make as specified in Appx 'F' here in after.

15 mm dia stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed at both ends fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-7218 or equivalent cat part No of Make as specified in Appx 'F' here in after.

20mm stop cock (Make ISI marked) cast cooper alloy of screwed down high pressure with crutch or butter fly handle , screwed with ends for iron pipe or unions fixed in repairs, complete all as specified and directed.

20mm dia PVC ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed of iron pipe and fixed, complete all as specified. Make: Prayag Cat No 152 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Vitreous china squatting 'Pan' Orrisa pattern 580 x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including PVC 'P' trap set in and including concrete and making good to floor in repair, complete all as specified. Make: Prayag Cat No 4055 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed and fly-nuts, screwed for iron pipe of 15mm bore and fixed in repairs, complete all as specified and directed. Make: Prayag Cat No 7202 or equivalent cat part No of Make as specified in Appx 'F' here in after.

15 mm dia angle valve cast copper alloy fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed at both ends fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-7210 or equivalent cat part No of Make as specified in Appx 'F' here in after.

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets 32mm dia PVC flush pipe etc fixed in repairs, complete all as specified. Make: Prayag Cat No-502 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Grating doom 125mm dia of stainless steel, suitable for floor taps, all as specified and directed.

Vitreous china wash hand corner basin, size 400 x 400mm with & including cast iron brackets, of approved make, waste pipe of 32 mm dia and brass CP waste coupling fittings fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-4655 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. Make: Prayag Cat No-BA-20 or equivalent cat part No of Make as specified in Appx 'F' here in after.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified. Make: Prayag Cat No 324 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Brass chromiuam plated shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. Make: Prayag Cat No BS-76 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.06sqm but not exc. 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including15mm screed bed or beading layer in CM 1:4 complete all as specified.

Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including15mm screed bed or beading layer in CM 1:4 complete all as specified.

Glazed ceramic coloured tiles (450 x 350 mm ) x 7mm thick as in vertical surface such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including including 15 mm thick rendering in CM 1:4 to receive tiles, complete all as specfied and directed.

25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in base course of floor surfaces, complete all as specified and directed.

18 to 20mm thick black Granite stone (table rubbed and polished) in cooking plateform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over & including 15mm thick screed bed in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc with & including making holes for gas pipe, complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas, cooking plateform etc reinforced or otherwise (superficial area exc 100 sq cm but n. exc. 250 sq cm), complete all as specified and directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Form work to sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs etc and similar works fair finished surface of concrete, complete all as specified .

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified

RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in slab supported on walls, columns in floors, roofs, landings, canopies, deck slabs, balconies and in shelves, complete all as specified.

Machine cut kota stone slab flooring 18-20 mm thick as in flooring, treads, plateform etc bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, including cutting, grinding and mirror polishing laid over & including 15mm thick screed bed in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc.complete, all as specified and directed.

Machine cut kota stone slab 15-20 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete fixed over & including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc.complete, all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, .complete, all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified & directed.

Taking down shutters of any description exceeding 1sqm and not exceeding 2sqm each and refixing, with resecuring or easing in same opening, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixed in opening as per specification & drawing, complete all as specified.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

35 mm 2nd class hard wood plain framed factory made, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces .The size of rail and stile as per IS :1003(Part-I ) kiln seasoned and chemically pressure treated, complete all as specified.

35mm thick 2nd class hard wood glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (a). complete all as specified.

300mm ordinary rat tail Mild steel rod pattern springs including roller and roller plate, complete all as specified.

Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed in floor with over all length of cover plate 150mm, complete all as specified.

Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 125 mm long complete all as specified.

Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 250mm long, all as specified.

Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed.

Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup board pelmet box etc with & including necessory beading, complete all as specified.

30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed

Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and directed. Make:-Prayag cat part No-P-346 or Equivalent cat part of make as specified in Appx 'F' here in after.

Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed in repairs with tinned tacks or galvanized wire staples, complete all as specified and directed.

Hacking out old broken glass, (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified and directed.

Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane, complete all as specified.

Dismantling water tanks of any decription / pattern of RCC/PCC/PVC exceeding 250 ltr capacity but not exc 500 ltrs, complete all as specified.

500 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. fixed, complete all as specified and directed.

Disconnecting existing tanks exceeding 250 ltr capacity but not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position with & including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified

Preparation of old ,treated plastered or unplastered surfaces including brooming down or steel wire brushing,scrapping down smokesoot,moulds,moss and efflorescent salts and trading oil greasy spots, and applying two coats of cement base paint on walls, complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Applying two coats of oil bound distemper on walls over one coat of chalk whitening including preparation of new or previously untreated surface, complete all as specified..

Applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

Applying two coats of white wash including preparation of old treated plastered surfaces of wall complete all as specified.

Applying two coats of white wash including preparation of old treated plastered surfaces of ceiling, complete all as specified.

Applying three coats of white wash including preparation of newly plastered surfaces of ceiling, complete all as specified.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces of any description, over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. Note:- Guard bar shall be measured & paid seperatly.

Applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10cm width or girth, complete all as specified and directed.

Two coat of synthetic enamel paint over a coat of pink primer on new untreated wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat ofsynthetic enamel paint, complete all as specified.

Preparation of old / new plastered surface and applying two coat of exterior emulsion paint like chajjas, facia work, complete all as specified.

15mm thick rendering on fair face of concrete surfaces in CM 1:4 for repair of chajja facia with water proofing compound @ 3% by weight of cement incl junction portion proper slope towards out side finish even & smooth with as as required PCC , 1:2:4 type B-0 (using 12.5mm graded stone aggregate)all as spd and directed by Engr –in –Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

75 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically describedwith & including any type of treatment, complete all as directed by Engineer-in-Charge.

PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), as in roof padding laid in slope, complete all as specified and directed.

Complete removal of the existing roof treatment & taking out old unsv membrane etc, including grabbing up of tree roots , roughing and prepration surfaces of old concrete floor by picking , scurubbing down with steel brushes ,sweeping clean and washing down with water to remove dust etc.and applying the following Roof treatment complete all as specified (a) Applying 1st course of bitumenous primer @ 0.4 lit/sqm conforming to IS-3384 over & including 15 mm screed bed . (b) Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180® C and applied @ 1.2 kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (d)Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180® C and applied @ 1.2 kg/sqm .

Complete removal of the existing sunken treatment including roughing and prepration surfaces of old concrete floor by picking , scurubbing down with steel brushes ,sweeping clean and washing down with water to remove dust etc.and applying the following treatment complete all as specified (a) 15 thick rendering on fair faces of brick work or cement surfaces in cm 1:4 mixed with water proofing admixture by weight of cement to sunken portion including wall of sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement finishing concrete including walls of sunken portion with proper slope all as spd ( NOTE :- W P admixture shall be measured and paid separately) (b)Applying Ist course of bitumenous primer @ 0.4 ltr /sqm conforming to IS-3384 over plastered surface .(c)Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperatureand applied @ 1.2 kg/sqm. .contd to item No-108.01

(d)Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (e)Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature and applied @ 1.2 kg/sqm .

PCC type C-2 1:3:6 (using 40mm graded stone aggregates) as in mass concrete in sunken floors etc complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified.

Taking down shutter of any description, exceeding. 1 Sqm and not exceeding 2 sqm each, complete all as specified & directed.

Pressed steel frame of size 105X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with one or more rebates including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Pressed steel frame of size 125X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with double rebated including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Plain cement concrete 1:3:6 type C-0 using 12.5mm graded aggregate as in back filling of pressed door frame, complete all as specified.

Mild steel FI as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 75 mm size, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled,50mm long fixed, complete all as specified.

Aluminium alloy handles, cast type, anodised of size 75mm and fixed, complete all as specified and directed.

100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete as specified.

40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, complete as specified.

Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Fe-290 (Gde E-165) including one shop coat of red oxide primer, complete all as specified.

Dismantling of pelmet box any thickness / size / description including covel fillets,, complete all as directed

20mm dia stainless steel crpmium plated conduits for curtain rod fixed with CP steel brackets in pelmet boxes, complete all as specified.

Dismantling water tanks of any decription/pattern of RCC/PCC/PVC exceeding 500 ltr capacity but not exc 1000 ltrs, complete all as specified.

Disconnecting existing tanks exceeding 500 ltr capacity but not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position with & including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified.

1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. fixed, complete all as specified and directed.

Vitreous china wash down water closet pedestal pattern white with & including plastic sheet cover, chromium plated hinging device, chromium plated spray jet including connecting to drain pipe and to flushing pipe fixed in repair, complete all as specified. Make: Prayag Cat No-4018/4019 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Vitreous china wash hand basin flat back coloured, size 550 x 400mm with & including cast iron brackets, of approved make, waste pipe of 32 mm dia and brass CP waste coupling fittings fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-4642 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Brass chromium plated toilet paper holder fixed to plug with chromium plated brass screws all as specified and directed. Make: Prayag Cat No-BA-08 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Stainless steel sink with drainage board 1mm thick for kitchen or laboratory wih plugs, washers and waste flexible pipe and CP coupling including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified.

Sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm rail complete all as specified.

Dismantling PVC/cement/CI pipes incl fittings of different bore of pipes and removing to store ( 50mm to 100mm), complete all as specified.

PVC (SWR) bends type B any radius 110mm dia with each over assessed door, complete all as specified and directed.

PVC (SWR) bends type B any radius 75mm dia with each over assessed door, complete all as specified and directed.

PVC (SWR) pipes type B single socketed in any length with rubber ring joints fixed to walls of bore 75mm, complete all as specified.

PVC (SWR) pipes type B single socketed in any length with rubber ring joints fixed to walls of bore 110mm, complete all as specified.

PVC (SWR) floor trap type 'B' of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed, complete all as specified.

PVC (SWR) type B vent cowl for 100mm bore pipe (ISI Marked), complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and removing unserviceable material exc 100 mtr, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified.

All as per ser Item No 149.00 above but except brick, complete all specified and directed

40mm thick Plain Cement Concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor & finished the surface even & smooth without using extra cement, complete all as specified

Plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed by the Engineer in Charge.

Vitrified ceramic tiles (light shade) 10 mm thick (square/ rectangular) area of each tile but not exceeding 0.36sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.

Vitrified ceramic tiles (light shade) 10 mm thick (square/ rectangular) area of each tile but not exceeding 0.36sqm as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 10mm thick plastering in CM (1:4), complete all as specified and directed.

Machine cut green marble slab of approved shade 18-20mm thick as in cooking plateform laid over cement screed base, jointed with grey cement slurry & pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete with & including 15mm thick screed bed in CM 1:4 including making holes for gas pipe, complete all as specified.

Preparation of old treated plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade, complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets all as specified & directed

9mm thick of size 605X605 mm ,ceiling panel laminated with PVC film on fron face and foil back available in due drop texture conforming to IS-2095, part-I (1996) fixed in the grid of E-grid suspended ceiling grid of size 600 x 600 mm with & including specification of suspended grid of ceiling as under mentioned:-(i) GI section frame work (Powder coated) consisting of main runner 38mm (Web) X24mm flange 0.33mm thick, cross 'Tee' 25mm (web)X 24mm flange 0.33mm thick & perimeter wall angle 24mm X 24mmX0.45mm, The wall angle shall be screwed/ fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm C/C , then suspending GI main 'Tee' in both directions by means of 4mm dia GI bar hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge.MAKE :- Armstrong, everest.

25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in vertical surface such as dados, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 10mm thick plaster in CM (1:4), complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated and unsheathed heavy duty cable drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/Exhaust fan point controlled by one switch/ 2way bell push or one fan point controlled by one switch through regulator, complete all as specified.

Description all as per item No.152 above but for 3 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

Description all as per item No. 152 here in before but for 3 Pin socket outlet 15 Amps point on independent board other switches with with PVC insulated copper conductor cable 2.5sqmm 1100 Volts grade, complete all as specified and directed.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch socket multipurpose combination 2 in 1, 2 and 3 pin, 5 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W. Make:- Crompton Cat Part No LSB-7W-CDL-BC or Equivalent cat part of make as specified in Appx 'F' here in after.

Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Decorative wall light fittings with type of CFL lamp 1x18 and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified Make: Havells Cat Part No-LHDL0216009 or equivalent of makes mentioned in Appx'F'.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:- Legrand cat part No-5076 21 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made distribution board vertical TPN 4 ways 415 volts IP 43-'IK 08 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed. Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCCBs and MCBs shall be measured and paid separately

MCCB 100Amp 4 pole ,16 KA AC 415 volts adjustable thermal magnetic setting, complete all as specified and directed. Make - Legrand Cat Part No 4200 15 or equivalent cat part of make as specified in Appx "F" here in after.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed. Note:-2 wire of 6sqmm, 6sqmm and one run of pvc conduit shall be measured as one unit.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 35 Sqmm x 3.5 core, complete all as specified.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc, complete all as specified.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Sub main wiring with single core cable 2x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed. Note:-2 wire of 10sqmm, 0ne wire of 6sqmm and one run of pvc conduit shall be measured as one unit.

Description all as per item No.152 here in before but for 3 Pin socket outlet 5 Amps on same board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

Socket outlet,3 pin, 5 Amp flush type, complete all as specifed.

50mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified.

20mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified.

20mm bore Gun metal, globe or gate valves (ISI Marked), with iron wheel head, screwed both ends for iron pipe. fixed, complete all as specified and directed.

Cutting existing cast iron pipe in position for insertion of CI fittings viz tee collar, bend or tail piece etc for any size bore pipe, complete all as specified and directed.

M/S Vishwakarma Builders

M/S STAR CONSTRUCTIONS