Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.8 LAccepted-Finance 1ST FLOOR SIDHARTH TOWER BALTI KHARKHANA BYELNE S J ROAD ATHGAON GUWAHATI KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | 1 | Accepted-Finance lowest | |
| 2 | 2₹24.4 L+₹64,860.70 (2.73%)Accepted-Finance | 2 | Accepted-Finance 2 lowest | |
| 3 | 3₹27.7 L+₹3.9 L (16.5%)Accepted-Finance A 04 ADGNJ CHANDAN NAGAR OPP IOCL PETROL PUMP RAMPUR ROAD BAREILLY U P 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | 3 | Accepted-Finance 3 lowest |
Tender Value
₹34.0 L
EMD Value
₹34,050
Closing Date
19 Apr 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, EWC, Bareilly
Opposite Circuit House, Katju Marg, Bareilly
Increasing capacity 33/11kv S/S Ujhani Town and Its 11 kv link line in district Budaun
2023_MVVNL_794196_2
01/EWC(B)/2023-24
Open Tender
Electrical Works
Item Rate
90 days
Ujhani Town
as per tender form
3 documents required · 3 mandatory
₹3,540
A/c No. 019205006347, IFSC Code ICIC0000192
₹34,050
25 May 2023
13 Apr 2023
19 Apr 2023
13 Apr 2023
19 Apr 2023
13 Apr 2023
Amount
Note - Any material/Labour required to complete the work (which is not covered in above) will be provided by the firm.
Part (A) - Increasing capacity
Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.
M.S. Channel 125x65mm
M.S.Angle 75x75x8mm
MS Angles 50x50x6mm
33 KV Lightening Arrestor
33 KV 400 A Bus Isolator
33 KV VCB 800A 750 MVA
Control pannel I/C for 33 KV Single T/F
33 kv O/D CT CTR 200/100/1
11 KV VCB I/C CTR 600/300/5A 250 MVA 630 A
11 KV VCB O/G CTR 200/100/5A 350 MVA
11 KV Cable 3x300 Sq. mm XLPE
11 KV Cables 3x185 Sq. mm XLPE
11 KV Cable jointing Kit
PCC Pole 8.5Mtr. Long
M.S.Channel 100X50X2240mm @ 9.6Kg/Mt. (Top channel & dropper)
M.S angle lron 65x65x6mm, 4300mm long @ 5.8 Kg/Mt (bracing)
11KV Disc Insulator 45KN
Disc Fittings Dog/Racoon 45 KN
Earthing complete
Stay Set 16X1800 mm complete
ACSR Dog conductor
Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2Ω as per as per details given below. Firm have to submitted jointly signed resistance testing certificate of earthing.
Making of triangular bridge by using 32 mm MS round bar electrode , GI strip 50x6mm and GI Pipe 50 mm dia with providing of well type pipe earthing upto 20 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral and T/F body including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark(all the required material will be supplied by the contractor and dully checked by AE (Works).
Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm and will be inspected by AE (Works) before installation.)
Fabracation, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt).
33 KV Bus Isolator Structure
Lightening Arrestor Structure
33 KV VCB Structure
33 KV CT Structure
Fuse Set Structure
Post insulator Structure
Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure.
33 KV Bus side isolator
Lightening Arrestor
33 KV VCB complete
33 KV CT (03 Nos)
33 KV Fuse Set (will be provided by firm)
33 KV Post insulator (will be provided by Firm.)
24 V Battery set with charger ( To be provided by firm I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 200A.H. Capacity with cabinet). Including 3 year guarantee.
Complete laying and termination of copper control cables (fire resistance) from 5 MVA power T/F, 33 KV VCB, 33 KV CT in the out door switch yard to the Transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc.
Laying of dog conductor alongwith cost of all required calmps and connectors etc. as per RESSPO Approved drawing of L.A., C.T., V.C.B., Bus Isolator etc.
Erection and grouting of double pole structure of PCC Poles including stays for 11KV out door feeders, complete in all respect as per RESSPO drawing along with grouting material about 3 meter 4" dia G.I. pipe along with required elbow shall be provided at D/P for power cable including provision of 02 Nos. feeders name plate on D/P. (All type of insulators, steel, stay set with wire, earthing rod, clamps, GI pipe & grouting material provided by the Firm except PCC pole).
Making of M.S. Angle Ladder type frame of Angle (75x75x8mm) & GI Strip (50x6mm) near power transformer for power cable with concreting of the same in the ground and proper clamping (50x6mm) of the same with transformer cable.
Making of M.S. Angle frame of (75x75x8mm) in L shape to connect T/F Neutral by flexible copper strip including cost of copper strip & will be connected to newly constructed well type earthing for Power T/F Neutral as per RESPO norms.
Laying of 11KV cable of different size from power T/F to control room I/C and control room to outside D/P. 11 KV Cable will be layed in brick trench constructed below 750mm to the ground level over the ganga sand. brick trench will be constructed by Ist class bricks covering three sides of cable, after laying 11 KV Cable brick trench will be filed by Ganga sand & then will be covered by bricks & backfill of soil over cable trench as per RESPO norms.
Erection of 11 KV incoming and outgoing panel (with testing & setting of relays) in substation control room including grouting of Anchor bolts of panel and making of pocket for power cable to insert in panel from trench and complete filling of control room's tranches by river sand.
Erection & testing of 1 No. single T/F Control panel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete filling of control room's tranches by river sand.
Termination of 11 KV 3x300sqmm size XLPE cable by filling 11 KV heat shrinkable type cable boxes including proper connection with LV side of transformer to switch gear panels by providing suitable connectors.
Termination of 11 KV 3x185sqmm size XLPE cable by filling 11 KV heat shrinkable type cable boxes including proper connection with LV side of switch gear panels to double poles out side S/S by providing suitable connectors.
Hoisting of 11 KV Cable on DP in GI Pipe.
Painting of the fabicated structures with one coat of red oxide primer and two coats of synthetic enamel alumm. Paint/green paint of ISI Mark alongwith earthing strip above ground level.
Shifting and dragging of 33/11 KV 5 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil.
Repairing and replacement of damage gasket, Bushing rod, Bushing .Breather,Silica gel etc by repalcement. (In case of old & used 5 MVA T/F)
Centrifusing of transformer oil in case of old & used power transformer.
Providing of Rubber matting sheet 8/10mm of good quality as per standard specification.
Comlete repairnig of swichyard fencing.
Part (B) - 11 kv line
Carriage of following line material for 11KV line from Store Centre to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site
STP 11Mtr. long
11 KV Cross Arm Channel V type
11 KV Pin insulator
11 KV Pin with nut
11 KV Disc insulator
11 KV Disc fitting
ACSR Raccon conductor
G.I. wire 8 SWG
Stay set complete
Earthing complete
LT XLPE Cable1x240 mm
11 KV 3X185mm XLPE Cable
11 KV 3X185mm XLPE Cable jointing kit O/D
11 KV 3X185mm XLPE Cable jointing kit S/through
Gaurding Angle 1.6mtr. Long
M.S angle lron 65x65x6mm, 4300mm long @ 5.8 Kg/Mt (bracing)
M.S.Channel 100X50X2240mm @ 9.6Kg/Mt. (Top channel & dropper)
F- bracket with bolt & nut
Cross Arm holding clamp
MS Channel 125x65x1300mm Tee off
Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, nut, bolt washers and stone pad would be provided by the contractor.
Single support of S.T pole 11 mtr long.
Double pole structure on S.T. Pole 11mtr long complete with bracing.
End type double pole structure on S.T. Pole 11mtr long complete with bracing.
Cable Exposer double pole structure on S.T. Pole 11mtr long complete with bracing.
Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.
Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. brick, ballast, sand etc would be provided by the contractor.
Laying and sagging of 3 phase ACSR Raccon conductor from double pole at 33/11 KV substation to double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.
Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.
Guarding of HT/LT/Telephone Line/ Road/River Crossing etc. by providing G.S Earth wire 7/16 SWG/GI wire No. 8/10 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support as per RESSPO norms. All type nut &bolts, would be given by the contractor.
Fixing of danger board and G.I barbed wire on each pole including proper clamping. All material would be provided by firm.
Write serial number on each pole in English with black paint in yellow paint background. All material would be provided be firm.
Laying of double circuit 11 KV 3X185 Sq. mm XLPE cable in normal soil by digging of trench 1250 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. The two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)
Cable laying by drill method in single circuit
Hoisting of 11 KV 3X185 Sq. mm. XLPE cable on double pole in GI pipe including its jumpering complete along with cost of A class GI pipe of size 6" dia 3 M long, clamps, nuts and bolts.
Fixing of 11 KV 3x185sqmm O/D & S/Th.
Painting of following support of existing 11 KV line with one coat of red oxide primer and two coats of aluminium white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of work.
Single pole structure of 11 mtr. ST Pole.
Double pole structure of 11 mtr. ST Pole.
Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of site incharge.
M/S SUPER ENGINEERING TRADERS
BHARAT ELECTRICAL TRADERS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .