SPL REPAIRS TO BLDG NO 52/7 and 8 OTM ACCN (STORES and LRW OFFICE) OF MED REGT AND SPL REPAIRS TO BLDG NO P-33 and P-34 (OR COOK HOUSE) AT FD REGT UNDER GE DIPATOLI

Amount

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc , complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement , complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement , complete all as specified and directed.

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted on ceiling complete over one coat of primer , complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted on ceiling complete over one coat of primer, complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted on walls complete over one coat of primer including one coat of 2mm thick wall care putty on walls , complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted on walls complete over one coat of primer including one coat of 2mm thick wall care putty on walls , complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces , complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed.

Supply only integral water proofing compound, complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing, complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4.00 Sqm each with shutter without taking of shutter from framed complete incl removing from site, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in coping, bed plate etc , complete all as specified and directed.

M&L for 2ndclass hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and directed.

M&L for 2nd class hardwood of sectional area exc.13 & n.exc 25 sqcm in plain fillets,square rectangular in section,clean sawn,secured with nails complete all as specified and directed

M/L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed.

S & F powder coated anodised alm ventilator louvre type with frame of frame of powder coated anodised aluminium section weighing 0.55 kg/m including 5mm thick coloured glass and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed.

S&F powder coated aluminium window shutter sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/M including necessary joining cleats glazing clips rubber packing powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauge including necessary locking arrangement and handle etc., as specified etc., complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos but hings 100 mm long for each door, complete all as specified and directed.

S&F for galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as directed.

S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as directed

S&F 150 mm long aluminum anodized barrel tower bolt extruded section, complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long , complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long, complete all as specified and directed.

M&L applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.

S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4, complete all as specified and directed..

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as directed , complete all as specified and directed.

All as item No 35 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed, complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair, complete all as specified and directed.

M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded aggregate as in sub base all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement , complete all as specified and directed.

M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs, complete all as specified and directed.

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

Demolition of side wall and top of old RCC water tanks 1000/500 ltrs capacity excluding tank beam and tanks bottom slab after removing existing inlet and outlet connection with all fitting and reparing remaining structure with plastering and making the surface flat and level in CM 1:4 complete all as specified and directed.

Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed

All as per item No 47 above but for 20 mm dia bore pipe, complete all as specified and directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site for 15 mm bore all as specified.

All as above item No 49 but for 20 mm dia, complete all as specified and directed.

S&F 15 mm Angle/Stop valves, fancy type chromium plated, or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair, 15mm bore bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and directed.

M&L in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed

S&F brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing , complete all as specified and directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed..

S&F 110 mm bore PVC (SWR) vent cowl , complete all as specified and directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR) WC connector with lip ring, complete all as specified and directed.

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed .

S&F in repairs CP soap dish approximate size 160x160x90mm all as directed

Demolition of Reinforced concrete drain pipe 150mm dia of pipe set in cement mortor and taking out from trenches if reqd complete all as specified and directed .

Demolition of cement concrete reinforced as in any description and any position not otherwise specially provided for etc complete all as specified and directed

Earth work in excavation in any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all as specified and directed

Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50 M and depositing wheredirected at a level not exceeding 1.5M above the starting point complete all as speecified and as directed.

M & L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed

M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed.

M & L , PCC (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in benching,drain and surface channel haunching manholes etc. incl necessary formwork weathering, slight and finished the surfaces even and smooth using extra cement incl necessary use and waste of formwork complete all as specified and directed.

S & F 150 MM bore reinforced concrete pipes,class NP2, confirming to IS laid to slope in trenches, jointed complete with collars complete all as specified and directed.

M & L , PCC (1:3:6, type C2 Using 40 mm graded stone aggregate) as in concrete bedding to drain pipes including packiing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M & L Precast reinforced cement concrete 1:2:4 type-B1 using 20 MM graded stone aggregates for cover slab of manhoes with plain faces including necessary formwork, placed in position set in CM (1:6) complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately.

M & L , TMT bars 10mm dia and over, as in reinforcement cut to length , bent to shape requd including cranking , bending spirally for hoopig for columns, hooking end and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L , TMT bars 6 to 8mm dia , as in reinforcement cut to length , bent to shape requd including cranking , bending spirally for hoopig for columns, hooking end and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface fair and even complete as specified and directed

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M &L for preparation of old plastered surface of wall and applying a coat of cement base paint complete all as specified and directed.

M &L for preparation of newly plastered surface and applying three coats of white wash on ceiling / wall surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall/ ceiling surfaces complete all as specified and directed.

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces.

M & L machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed (1:6) and jointed including rubbing and polishing complete as per specified directed.

Removing all existing old treatment over RCC roof or Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc.

M & L 50 mm thick sand filling under floors or in foundations including watering and consolidation the surfaces all as specified and directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M 35 grade with grey cement and no pigment, complete all as specified and directed.

M & L cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floor (75mm thick), complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN/TPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 102 here-in-before but one 3 Pin Socket out let 5 Amps on the same board , complete all as specified and directed.

All as per Ser item No 102 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed.

All as per Ser item No 102 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly, complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No 113 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire, complete all as specified and directed.

All as per ser item No 113 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire, complete all as specified and directed.

All as per ser item No 113 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire, complete all as specified and directed.

Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed complete all as specified and directed at site.

Supply and fix MCCB DB VTPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 63 Amp 415 volts 16kA 4 pole complete all as specified and directed.

S&F MCB SP( 6 to 32) Amp 240 volt 'C' curve , complete all as specified and directed.

S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing Old UNSV bulb lamp complete all as specified and directed.

S&F in replacement of LED tube light fitting 20 watt 230 Volt LED Lighting with polycarbonate housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed at site.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

S&F steel body ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick by Engineer- in-charge

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge.Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

Raju Electrical and Refrigeration Works

M/S.R.S.Chauhan and Sons

universal enterprises

M/S SHRI SHYAM BUILDERS

M/S RANKWAR CONSTRUCTION

M/s Mukesh and company