PROVISION OF SECURITY WALL AND ALLIED WORKS NEAR RAMESWARAM UNDER GE (N) TIRUNELVELLI

Amount

Schedule "A" Part – I to Schedule "A" Part – XI: NOTE: Schedule "A" Part – I to Part – XI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "BUILDINGS & STRUCTURES", as listed in Schedule "A" Part – I

Lumpsum price worked out by the contractor for "EARTH WORK/EXCAVATION", as listed in Schedule "A" Part – II

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – III

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – IV

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL ", as listed in Schedule "A" Part – V

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VI

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – VII

Lumpsum price worked out by the contractor for "PATH", as listed in Schedule "A" Part – VIII

Lumpsum price worked out by the contractor for "COMPOUND WALL", as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "DG SET", as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "GATE", as listed in Schedule "A" Part – XI

Schedule "A" Part - XII: [Miscellaneous Items] [Internal Electrification, Internal water supply, External Water Supply, External Electrification, and DG]

Internal Electrification

M & L point wiring complete with 1100 Volts, FRLS grade, 1.5 Sq.mm, Single core, PVC Insulated, unsheathed, multistranded copper conductor cable, confirming to IS - 694 drawn through and including medium grade PVC conduit, 20 mm dia including all accessories concealed in walls / roofs / floors / ceiling etc. and pressed GI modular box as per OEM for switch/ sockets/ fan regulator/ bell push and suitable size as required at site and suitable for modular brackets for fixing modular switches, fittings, regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, single sore, PVC insulated, unsheathed, multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for one light / fan point / exhaust fan / ceiling rose/ bell point controlled by one modular switch complete all as specified. for the following Note:Cost of modular GI box and modular outer cover plate shall be included in the quoted rate.

All as per Serial Item No. 12 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No.12 here-in-before but controlled by two two way switch complete all as specefied and directed.

M & L point wiring complete with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single core, PVC Insulated, unsheathed, multistranded copper conductor cable, confirming to IS - 694 drawn through and including medium grade PVC conduit, 20 mm dia including all accessories concealed in walls / roofs / floors / ceiling etc. and pressed GI modular box as per OEM for switch/ sockets and suitable size as required at site and suitable for modular brackets for fixing modular switches, fittings, regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 2.5 Sq.mm, single sore, PVC insulated, unsheathed, multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for 3 pin 6 Amp socket outlet point controlled by one modular switch of 5/6 Amp complete all as specified. Note:Cost of modular GI box and modular outer cover plate shall be included in the quoted rate.

M & L point wiring complete with 1100 Volts, FRLS grade, 4.0 Sq.mm, Single core, PVC Insulated, unsheathed, multistranded copper conductor cable, confirming to IS - 694 drawn through and including medium grade PVC conduit, 20 mm dia including all accessories concealed in walls / roofs / floors / ceiling etc. and pressed GI modular box as per OEM for switch/ sockets and suitable size as required at site and suitable for modular brackets for fixing modular switches, fittings, regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 4.0 Sq.mm, single sore, PVC insulated, unsheathed, multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for 3/5 pin 15 Amp socket outlet point controlled by one modular switch of 15/16 Amp complete all as specified. Note:Cost of modular GI box and modular outer cover plate shall be included in the quoted rate.

S&F LED inverter lamp for AC 240 Volts, B22 type CDS, five star rated, 12 Watts complete all as specified as directed

Supply and fixing of ceiling fan complete with blades, down rod and other accessories, AC 230 Volts, 1200 mm sweep, min air delivary 210 CFM with service value 6.00, BEE, 5 star rated with brushless direct current motor [BLDC] including 01 No electronic regulator modular type, connecting with 1.0 Sqmm, 2 core copper conductor from ceiling rose complete all as specified and as directed.

Supply and fixing exhaust fan, 250 mm sweep, plastic body, heavy duty with louvers, AC single phase, 230 volts, connection with 1.0 sqmm copper conductor flexible wire from ceiling rose including making necessary opening and making good the disturbed surface complete all as specified and as directed.

Supply and fixing exhaust fan, 300 mm sweep, metallic body, 900 RPM heavy duty with louvers, AC single phase, 230 volts , connection with 1.0 sqmm copper conductor flexible wire from ceiling rose including making necessary opening and making good the disturbed surface complete all as specified and as directed.

S&F energy efficient LED Tube light fitting with tube 5W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed

S&F energy efficient LED Tube light fitting with tube 10W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed

S&F energy efficient LED Tube light fitting with tube 20W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed

S & F energy efficient LED security light fitting with tube 30 watts new generatiion energy saving & environmental friendly long life, made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver compartment with IP66 protection pre-wired and connecting up with with 1.0 Sqmm copper conductor cable upto connector including 1.5 metre long GI tubing light grade bracket of 32 mm dia bend to shape for fixing on wall/ pole with suitable MS bracket nuts, bolts etc., complete all as specified and directed.

M & L for sub-main wiring with 4.0 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 4.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through 20 mm dia PVC conduit complete all as specified and as directed. Note :(i) Two run of 4.0 Sqmm + one run of 4.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

S & F MCB DB, double door, single pole and neutral, 8 way, sheet steel, phospetised powder painted with 200 Amps rated bus bar, 240 Volts, neutral link, IP : 43 protection, flush mounting type, concealed in walls complete all as specified and as directed.

S & F MCB DB, double door, single pole and neutral, 6 way, sheet steel, phospetised powder painted with 200 amps rated bus bar, 240 Volts, neutral link, IP : 43 protection, flush mounting type, concealed in walls complete all as specified and as directed.

M & L earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to GI earth lead wire 4.0 mm dia [earth lead] and GI pipe 15 mm, light grade for earthing lead protection to the extent of maximum 7.5m, earth plate electrode surrounded by 150 mm thick packed layers of charcoal and common salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, charcoal, common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified. Note: GI earth wire upto 7.5 metres shall be deemed to be included in the quoted lumpsum and beyond 7.5 metre shall be measured and paid separately under relavent item.

Internal Water Supply

S & F Angle stop valve, chromium plated, fancy type, screwed down, high pressure screwed and fixed, suitable for 15mm inner dia including chromium plated urinal water droper complete all as specified and as directed.

External Water Supply

Supply, fix, test and commissioning of Pumpset of capacity 5 HP, centrifugal type, electric driven, 440 Volts , three phase, with discharge 100 LPM, delivery head 35 m, suction dia 65 mm and delivery dia 50 mm including fixing arrangements complete all as specified and directed.

M & L for masonry valve chamber of size 600 X 600 X 450 mm [interanl dimensions] comprising of 50mm thick PCC for valve including excavation and earth work in any type of soil and 200 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type B1 couping 50 x50x6 mm angle iron 3 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Supply and fix flanged end lift type Foot valve 65 mm dia with brass strainer, suitable flanges, nuts, bolts, gaskets complete all as specified and as directed.

Supply, fix, testing and commissioning of Chemical dosing pump with dosing tank made of LDPE of 100 litres capacity to store and inject sodium hypochlorite solution into water supply pipeline at the rate of 3 LPH, 1.6 Kg of sodium hypochloride solution (10-12% conc) in 100 Litre of water to maintain residual chlorine level between 0.3-0.5 ppm at overhead tank complete all as specified and directed. [A] Technical characteristics of pump : Pressure up to: 10 kg/cm2 , Manual / automatic speed control adjustable while running or stopped., Electronically operated Mechanically actuated diaphragm, Manual stroke length adjustable while running, Electro Magnetic Drive, Composite PTFE faced Hypalon Diaphragm, Adjustment of flow rate while running or stopped : from 0 to 100%, Electromagnetic Power Unit (EPU) 230Volts, 50Hz, Single Phase AC, Flow max. (l/h) : Min - 0.06 (l/h) to Max - 6 (l/h) Make of pump: Dosing pump series - B from M/s Milton Roy, Make of sodium hypochlorite storage tank :- Thermax or its equivalent as approved by GE.

Supply only sodium hypochlorite solution with following parameters Appearance : Colorless to yellowish liquid. Odour : Chlorine-like odor with strength 5-15% strength, Solubility:100% in water, Density : 1.07 - 1.14, pH : 9 - 10 (neutral solution-no excess sodium hydroxide), % Volatiles by volume @ 21C (70F) : ca. 95, Boiling Point : 40C (104F), Decomposes slightly, Melting Point:- 6 C (21F), Vapour Pressure (mm Hg) : 17.5 @ 20C , 68F complete all as specified and as directed.

External Electrification

Material and Labour for laying double walled corrugated HDPE pipe inner plain compression resistance 750 N with RR & NFP [6M] Nominal dia 90 mm, complete all as specified and as dirtected.

Material and Labour for laying double walled corrugated HDPE pipe inner plain compression resistance 750 N with RR & NFP [6M] Nominal dia 75 mm, complete all as specified and as dirtected.

Material and Labour for laying double walled corrugated HDPE pipe inner plain compression resistance 750 N with RR & NFP [6M] Nominal dia 63 mm, complete all as specified and as dirtected.

Supply , install, testing and commissioning of outdoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.15 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 150 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts,100 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUT GOING (a) MCCB 63 Amps, 415 Volts , 3 pole, breaking capacity 16 KA - 02 Nos (b) MCCB 25 Amps, 415 Volts, 3 pole, breaking capacity 16 KA - 01 No (c) MCCB 16 Amps, 415 Volts, 3 pole, breaking capacity 16 KA - 02 Nos (d) MCB 6Amps, 415 Volts, TPN, 10 KA, 'C' Curve - 03 Nos (e) Astonomical timer switch - 1 No. Note :- (i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with ON- OFF latches in the housing and other parameters flush mounting with LED indication lamp for each outgoing complete

Supply , install, testing and commissioning of outdoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.15 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 100 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts,63 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUT GOING (a) MCCB 40 Amps, 415 Volts , 3 pole, breaking capacity 16 KA - 02 Nos (b) MCB 10 Amps, 415 Volts, TP, 10 KA, 'C' Curve - 01 No (c)MCB 6 Amps, 415 Volts, TP, 10 KA, 'C' Curve - 03 Nos (d) Astonomical timer switch - 1 No. Note :- (i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with ON- OFF latches in the housing and other parameters flush mounting with LED indication lamp for each outgoing complete

Supply , install, testing and commissioning of outdoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.15 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 100 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts, 40 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUT GOING (a) MCCB 25 Amps, 415 Volts , 3 pole, breaking capacity 16 KA - 01 No (b) MCB 6 Amps, 415 Volts, TP, 10 KA, 'C' Curve - 04 Nos (c) Astonomical timer switch - 1 No. Note :- (i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with ON- OFF latches in the housing and other parameters flush mounting with LED indication lamp for each outgoing complete

Supply , install, testing and commissioning of outdoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.15 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 100 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts, 25 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUT GOING (a) MCCB 16 Amps, 415 Volts , 3 pole, breaking capacity 16 KA - 01 No (b) MCB 6 Amps, 415 Volts, TP, 10 KA, 'C' Curve - 04 Nos (c) Astonomical timer switch - 1 No. Note :- (i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with ON- OFF latches in the housing and other parameters flush mounting with LED indication lamp for each outgoing complete

Supply , install, testing and commissioning of outdoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.15 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 100 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts, 16 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUT GOING (a) MCB 6 Amps, 415 Volts, TP, 10 KA, 'C' Curve - 04 Nos (b) Astonomical timer switch - 1 No. Note :- (i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with ON- OFF latches in the housing and other parameters flush mounting with LED indication lamp for each outgoing complete

Supply , install, testing and commissioning of indoor LT feeder pillar box, CPRI approved, made out of CRCA sheet 3.00 mm thick, vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comprising of high conductivity Aluminium bus bar of capacity 100 Amps three phase and half the capacity for neutral including necessary PCC foundation suitable to accommodate and including the following as all specified and as directed.:-

INCOMING (a) MCCB 415 Volts, 25 Amps, 4 pole breaking capacity 16 KA - 01 No. (b) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp - 1 No OUTGOING (a) MPCB, Rating -10 A suitable for 5 HP motor, 415V - 2 Nos (b) DOL Starter suitable for motor 5 HP with Control MCB , main contactor, auxillary Contactor,Push Botton (stop & start Functioning), over load relay, single phase preventor- 2 nos. (c) MCB, 415 Volts, 10KA 'C' curve, TP 10 Amps- 1 No. (d) MCB, 240 Volts , 10 KA , 'C' curve, DP 10 Amps - 1 No. (e) Digital Panel Meter Multifunctional type with CT Coil for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp complete - 2 Nos Note :-(i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with on- off latches in the housing and LED indication lamp for for incomer & each outgoing complete .

S & F loop in loop out box [minimum size 205x255x112 mm] of FRP made with IP 65 protection of thermoplatic circuit breaker boxes with metric knockouts for cable entry and exit, combiclimate Cable Glands of IP66/IP67 for cable entry and Grommets IP 65 for conduit for cable exit with connector and provision to fix MCB, terminals as bus terminals for cable with necessary fixing arrangements and with cable glands etc all as specified and directed.

M & L for wiring with 1.5 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 1.5 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through 20 mm dia PVC conduit complete all as specified and as directed. Note :(i) Two run of 1.5 Sqmm + one run of 1.5 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

Material and Labour for GI bracket made out of 32 mm dia GI pipe medium grade, length 1.50 Metre, bent to required shape and fixed with clamps made of 40mm x 6mm flat iron, including suitable nuts , bolts , washers for fixing of light to pole, complete all as specified and as directed.

Supply and fix Search light suitable for fixing in watch tower cabin, High intensity, weather and dust proof swiveling type with stainless steel body , tripod and glass reflectors LED 150 watts, 230 volts and with all controlling accessories complete all as specified and as directed.

M&L for maintainance free chemical earthing by auguring & installation of copper bonded rod using machine bore and filling with back fill compound using copper bonded rod of dia 20 mm, length 3 Metre, made of low carbon high tensile steel with copper plated (250+ microns) for preventing external corrosion, with top end connected with copper plated welded busbar terminal of dimension 150mm x 50mm x 6 mm, complete conforms to IS : 3043 - 1987 and carbon based, high conductive back fill compound 'Conductolite' with resistivity < 0.5 ohm-metre (In dry conditions) & resistivity is non-moisture dependant, pH Value : 8.0 - 9.0, electronic & ionic conduction, less susceptible to shrinkage,with hygroscopic & corrosion resistive properties and covering with heavy duty polyplastic earth pit chamber cover . Make : M/s Ashlok Safe Earthing Electrode Limited or its equivalent as approved by GE.

Material and Labour for preparation of new surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, priming plastered and other surfaces with alkali resistant priming paint and applying two coats of cement based paint complete all specified and as directed.

Supply and fix HT 11KV cable route indicator of duly embose "LT cable" on CI of 100 mm dia, 7mm thick at a heigt of 30 cm from the ground level along with PCC foundation complete all specified and as directed.

DG SET

Supply, install testing & commissioning of silent Diesel Engine driven generating set of capacity 40 kVA with AMF Panel, 415 volts, 3 Phase, 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norm- II . Technical Specification : Power Rating kVA : 40 , No. of Phases : 3 Phase, Output Voltage (V) : 415 Volts, Power Factor : 0.8 (lagging), Current (3 phase/ 1 phase) (A) : 56 A , Frequency (Hz) and RPM : 50 Hz, 1500 RPM, MoEF Certified Power (hp) : 53, Required Power for Rated kVA (hp) ; 51, Cooling : Liquid Cooled (EG Complete 50:50), Aspiration; Turbocharged, Charge Air cooled, No. of cylinders : 4, In-line, Fuel: High Speed Diesel , Starting system : 12 V DC Electrical, Lube oil specification : 15W40, Alternator Voltage regulation (Max.) - ±1%, Class of Insulation: H Class .

Note: Microprocessor / relay based AMF control, Indicating lamps for ‘Load ON’ and ‘Set Running’, Circuit breakers of suitable rating with overload and short circuit protections panel, Battery charging alternator , 1 x 12 V DC battery , Intuitive operator interface which includes LED backlit LCD display with tactile feel soft-switches and generator set status LED lamps Engine Metering: Oil pressure, Engine temperature, Starting battery voltage, Engine running hours, AC Alternator Metering: L-L Voltage and L-N Voltage, Current (phase and total), kVA (phase and total) and Frequency. Engine Protection: Low lube oil pressure, High/Low coolant temperature, Battery Over/Under/Weak Volts, Fail to Crank/ Start, Sensor failure, Cranking lockout, Low fuel level. AC Alternator Protection: Over/Under Voltage, Over/Under Frequency, Loss of AC sensing, Data Logging: Engine hours, Control hours and upto 5% fault codes, Critical grade silencer suitably optimised to meet stringent sound emission standards laid down by MoEF / CPCB,

Engine and alternator are mounted on a common MS fabricated base frame with AVM pads, Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for protection, Specially designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions ,the acoustic enclosure shall be made of CRCA sheets,

SEWAGE DISPOSAL

Supply and fixing of septic tank 25 users of LLDPE type complete all as specified and as shown on drawings.

Supply and fixing of septic tank 10 users of LLDPE type complete all as specified and as shown on drawings. Note For Serial item Nos 52 & 53:- [a] Earthwork/ excavation shall be measured and paid separately under Schedule 'A' Part-II.

S KUMARAN

Phoenix Infra

PMR CONSTRUCTIONS

SUNDER BUILDERS

surendra infrastructure pvt ltd

ORIENT ELECTRIC CO

FUTURE ONE FACILITY MANAGEMENT