Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 CrAccepted-AOC GODREJ GENESIS BUILDING UNIT NO 609 PLOT NO XI 6TH FLOOR BLOCK EP GP SECTOR V SALT LAKE KOLKATA 700091 | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | ₹1.2 Cr | 1 | Accepted-AOC L1 |
| 2 | 2₹1.4 Cr+₹21.0 L (18.0%)Rejected-AOC 301 306 PANORAMA COMPLEX RC DUTT ROAD ALKAPURI VADODARA 390007 | VADODARA | GUJARAT | 390007 | ₹1.4 Cr+₹21.0 L (18.0%) | 2 | Rejected-AOC Not L1 |
| 3 | 3₹1.5 Cr+₹31.2 L (26.8%)Rejected-AOC | ₹1.5 Cr+₹31.2 L (26.8%) | 3 | Rejected-AOC Not L1 |
| 4 | Rejected-Technical OPPOSIT RELIANCE PETROL PUMP NEAR SINGLA DHARAM KANTA SIRSA ROAD FATEHABAD FATEHABAD HARYANA 125050 | FATEHABAD | HARYANA | 125050 | - | - | Rejected-Technical Technically non-responsive |
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
4 Feb 2021, 1:00 pmClosed
Chief General Manager(PP and D), AEGCL
1st Floor, Bijulee Bhawan, Paltan Bazar, Guwahati
ERECTION OF OPGW AND SUPPLY AND ERECTION OF ASSOCIATED EQUIPMENT FOR LILO FROM 132KV KUMARGHAT-BADARPUR TRANSMISSION LINE OF PGCIL TO 132/33KV KARIMGANJ SUBSTATION
2020_AEGCL_19831_1
AEGCL/MD/TECH-902/ OPGW-Karimganj LILO/2020
Open Tender
Network /Communication Equipments
Turn-key
90 days
KARIMGANJ
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹2.5 L
Yes
31 Aug 2021
31 Dec 2020
5 Feb 2021
31 Dec 2020
4 Feb 2021
31 Dec 2020
Amount
132KV S/S Communication Equipment: Transmission Equipment & SDH Equipment -STM4(ADM- up to Four Direction)
Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 2 & 3 below.) [1 at each Sub Station]
Optical Interface/SFP for:
S1.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
S4.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
L4.1 ( 1 at Karimganj GSS, 1 at Badarpur GSS)
Optical Line Interface Card to support upto 80Kms to 120 Kms ( 1 at Karimganj GSS, 1 at Kumarghat GSS)
Tributary Cards
E1 interface card (Minimum 16 interfaces per card) [ 1 at each GSS]
Ethernet interfaces with minimum of 10/100Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) [ 1 at each GSS]
Analog Telephone (2 wire telephone ) [at Karimganj GSS]
Termination Equipment
Drop and Insert Multiplexer Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards [ 1 at each GSS]
Subscriber Line Interface
2 wire (sub/sub) voice channel cards (min 8 channels per card) [ 1 at each GSS]
4wire (E&M) voice channel cards (min 8 channels per card) [ 1 at each GSS]
2 wire (Sub/Exch) voice channel cards(min 8 channel per card) [ 1 at each GSS]
Asynchronous Sub-Channel Data Cards(V.24/V.28) minimum 4 channel per card with opto-coupler interface [ 1 at each GSS]
Synchronous data card(N*64Kbps) [ 1 at each GSS]
Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
For primary multiplexer,Drop/ Insert [ 1 at each GSS]
For SDH equipment(including DDF patching facilities and other accessories [ 1 at each GSS]
Main Distribution Frame(100 pairs) [ 1 at each GSS]
Digital Protection Coupler with both analog (PLCC) and E1 Interface with atleast four commands supporting feature [ 2 at Karimganj GSS, 1 at Kumarghat gss and 1 at Badarpur GSS]
10 Core 1.5 sqmm Copper Cable for DPC Integration
Craft Terminal
Hardware (LAPTOP)
Software
Pre connectorized optical patch cords(Minium 8 patch cords per station)
FIBRE OPTIC CABLES
Fibre Optic Approach Cable (DWSM24F)
OPGW HARDWARE/FITTINGS AND TERMINATIONS
Joint Box for LILO
FODP 24F: Indoor type, rack mounted with FCPC coupling and pig tails [ 1 at each GSS]
Installation hardware set for above 24 Fibre, Fibre Optic Approach cableties/clips/cleats, conduits, ducts, supports,fittings, accessories etc for extending OPGW from sub station end tower/gantry to FODP at control/communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/communication room.
Description of Work / Item(s)
Amount
132KV S/S Communication Equipment: Transmission Equipment & SDH Equipment -STM4(ADM- up to Four Direction)
Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 2 & 3 below.) [1 at each Sub Station]
Optical Interface/SFP for:
S1.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
S4.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
L4.1 ( 1 at Karimganj GSS, 1 at Badarpur GSS)
Optical Line Interface Card to support upto 80Kms to 120 Kms ( 1 at Karimganj GSS, 1 at Kumarghat GSS)
Tributary Cards
E1 interface card (Minimum 16 interfaces per card) [ 1 at each GSS]
Ethernet interfaces with minimum of 10/100Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) [ 1 at each GSS]
Analog Telephone (2 wire telephone ) [at Karimganj GSS]
Termination Equipment
Drop and Insert Multiplexer Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards [ 1 at each GSS]
Subscriber Line Interface
2 wire (sub/sub) voice channel cards (min 8 channels per card) [ 1 at each GSS]
4wire (E&M) voice channel cards (min 8 channels per card) [ 1 at each GSS]
2 wire (Sub/Exch) voice channel cards(min 8 channel per card) [ 1 at each GSS]
Asynchronous Sub-Channel Data Cards(V.24/V.28) minimum 4 channel per card with opto-coupler interface [ 1 at each GSS]
Synchronous data card(N*64Kbps) [ 1 at each GSS]
Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
For primary multiplexer,Drop/ Insert [ 1 at each GSS]
For SDH equipment(including DDF patching facilities and other accessories [ 1 at each GSS]
Main Distribution Frame(100 pairs) [ 1 at each GSS]
Digital Protection Coupler with both analog (PLCC) and E1 Interface with atleast four commands supporting feature [ 2 at Karimganj GSS, 1 at Kumarghat gss and 1 at Badarpur GSS]
10 Core 1.5 sqmm Copper Cable for DPC Integration
Craft Terminal
Hardware (LAPTOP)
Software
Pre connectorized optical patch cords(Minium 8 patch cords per station)
FIBRE OPTIC CABLES
Fibre Optic Approach Cable (DWSM24F)
24 Fibre OPGW (DWSM) (To be transported from AEGCL store at Sarusajai S/S at Guwahati)
OPGW HARDWARE/FITTINGS AND TERMINATIONS
Joint Box for LILO
FODP 24F: Indoor type, rack mounted with FCPC coupling and pig tails [ 1 at each GSS]
Installation hardware set for above 24 Fibre, Fibre Optic Approach cableties/clips/cleats, conduits, ducts, supports,fittings, accessories etc for extending OPGW from sub station end tower/gantry to FODP at control/communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/communication room.
OPGW HARDWARE/FITTINGS AND TERMINATIONS (To be transported from AEGCL store at Sarusajai S/S at Guwahati)
Suspension Clamp Assembly for 24 Fibre OPGW
Dead End Tension Clamp for 24 Fibre OPGW
Double Tension Fitting Assembly for 24F OPGW including all accessories for Joint Box (Splicing) Locatiion
Passing Double Tension clamp for 24F OPGW
Tension fitting assembly on Suspension Tower for 24F OPGW including all accessoriies at joint box (Splicing) location
Vibration Damper for 24F OPGW
Down Lead Clamp Assembly for 24F OPGW
Joint Box for 24F OPGW
Description of Work / Item(s)
Amount
132KV S/S Communication Equipment: Transmission Equipment & SDH Equipment -STM4(ADM- up to Four Direction)
Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 2 & 3 below.) [1 at each Sub Station]
Optical Interface/SFP for:
S1.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
S4.1 (1 at Badarpur GSS and 1 at Kumarghat GSS)
L4.1 ( 1 at Karimganj GSS, 1 at Badarpur GSS)
Optical Line Interface Card to support upto 80Kms to 120 Kms ( 1 at Karimganj GSS, 1 at Kumarghat GSS)
Tributary Cards
E1 interface card (Minimum 16 interfaces per card) [ 1 at each GSS]
Ethernet interfaces with minimum of 10/100Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) [ 1 at each GSS]
Termination Equipment
Drop and Insert Multiplexer Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards [ 1 at each GSS]
Subscriber Line Interface
2 wire (sub/sub) voice channel cards (min 8 channels per card) [ 1 at each GSS]
4wire (E&M) voice channel cards (min 8 channels per card) [ 1 at each GSS]
2 wire (Sub/Exch) voice channel cards(min 8 channel per card) [ 1 at each GSS]
Asynchronous Sub-Channel Data Cards(V.24/V.28) minimum 4 channel per card with opto-coupler interface [ 1 at each GSS]
Synchronous data card(N*64Kbps) [ 1 at each GSS]
Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
For primary multiplexer,Drop/ Insert [ 1 at each GSS]
For SDH equipment(including DDF patching facilities and other accessories [ 1 at each GSS]
Main Distribution Frame(100 pairs) [ 1 at each GSS]
Digital Protection Coupler with both analog (PLCC) and E1 Interface with atleast four commands supporting feature [ 2 at Karimganj GSS, 1 at Kumarghat gss and 1 at Badarpur GSS]
Reconfiguration and Integration with Existing Telecom Equipment
Craft Terminal
Hardware (LAPTOP)
Software
FIBRE OPTIC CABLES
Line Survey
Drum Testing
Dismantling of hardware fittings from LILO Tower towards Kumarghat Joint Box end and refitting and dismantling of hardware fittings from LILO tower towards Badarpur end and refitting
Dismantling of existing ground wire for live line and Stringing of 24 Fibre (DWSM)OPGW Fibre Optic cable
Installation of Fibre Optic Approach Cable (DWSM24F)
OPGW HARDWARE/FITTINGS AND TERMINATIONS
Suspension Clamp Assembly for 24 Fibre OPGW
Dead End Tension Clamp for 24 Fibre OPGW
Double Tension Fitting Assembly for 24F OPGW including all accessories for Joint Box (Splicing) Locatiion
Passing Double Tension clamp for 24F OPGW
Tension fitting assembly on Suspension Tower for 24F OPGW including all accessoriies at joint box (Splicing) location
Vibration Damper for 24F OPGW
Down Lead Clamp Assembly for 24F OPGW
Joint Box for 24F OPGW
Joint Box for LILO
FODP 24F: Indoor type, rack mounted with FCPC coupling and pig tails at Respective Sites
Installation hardware set for above 24 Fibre, Fibre Optic Approach cableties/clips/cleats, conduits, ducts, supports,fittings, accessories etc for extending OPGW from sub station end tower/gantry to FODP at control/communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/communication room.
ABN Tower and Transmission Private Limited
Ganga Constructions
Apar Industries Limited
Ganga Constructions
ABN Tower and Transmission Private Limited
Apar Industries Limited
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .