REPAIR/ POLOSHING TO WOODEN FURNITURE AND REPAIR TO CHORPOY GI PIPE OF MD ACCN/ OTM ACCN UNDER GE (N) PUNE

Amount

Material and labour for preparing old polished surface of almirah large 1/2H x 1/2S by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No - DB-4040)

Material and labour for preparing old polished surface of almirah large with shelves by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No - DB-4116)

Material and labour for preparing the old polished surface of almirah medium 1/2H x 1/2S by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - DB-4042)

Material and labour for preparing old polished surface of almirah medium with shelves by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No DB-3953).

Material and labour for preparing old polished surface of almirah mess utensils by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No FD-93).

Material and labour for preparing old polished surface of bed with ply wood top by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing No FD-246).

Material and labour for preparing the old polished surface of book case by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing - FD-237).

Material and labour for preparing the old polished surface of book shelf open large by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing - TP)

Material and labour for preparing old polished surface of chair dining by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No FD-203/ FD-279).

Material and labour for preparing old polished surface of chair dining for JCO by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No FD/MAP/II/05).

Material and labour for preparing old polished surface of chair dining officer by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg No FD/E-6/MAP/II/10).

Material and labour for preparing old polished surface of chair dining cushion for seat and back by removing stains/spots with sand paper, filling the holes/ crack/ cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - TP)

Material and labour for preparing old polished surface of chair easy by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD-201/ FD229)

Material and labour for preparing old polished surface of chair writing by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD-280).

Material and labour for preparing old polished surface of chest of drawer by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD-57A).

Material and labour for preparing old polished surface of hat stand with mirror by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD- 233).

Material and labour for preparing old polished surface of locker bed side wooden by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - DB-4074).

Material and labour for preparing old polished surface of peg table by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD- 277).

Material and labour for preparing old polished surface of sofa chair single seater with cushion cover for seat & back by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing - TP).

Material and labour for preparing old polished surface of sofa chair single seater with cushion cover for seat & back by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - TP).

Material and labour for preparing old polished surface of sofa set 1 seater model No 302/B/1 by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - TP).

Material and labour for preparing old polished surface of sofa set 4 seater by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg -FD-373/ FD-281/ FD-258).

Material and labour for preparing old polished surface of sofa set 4 seater ( two seater-01, single seater-02) by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -TP)

Material and labour for preparing old polished surface of sofa set 5 seater by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-258)

Material and labour for preparing old polished surface of sofa set two seater 1280mm x 600mm with arms rest by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-TP)

Material and labour for preparing old polished surface of sofa set 5 seater by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-373/ FD-281).

Material and labour for preparing old polished surface of table 3' x 2' without drawer by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg-FD-283/284)

Material and labour for preparing old polished surface of table 600mm x 600mmx 760mm by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -TP).

Material and labour for preparing old polished surface of table bed side by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-28/ FD-210/ FD-248).

Material and labour for preparing old polished surface of table centre by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-235/ FD-274).

Material and labour for preparing old polished surface of table dining 1200mm x 900mm x 760mm by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg -FD-273).

Material and labour for preparing old polished surface of table dining 6/8 person by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg -FD-273/ FD-239).

Material and labour for table dressing gents with looking mirror by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. Drg No. FD-230/ FD-379

Material and labour for mirror of table dressing ladies with mirror by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing No. FD-251/ FD-378/ FD-361).

Material and labour for preparing old polished surface of table examination 3' x 2' by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -TP).

Material and labour for preparing old polished surface of table office clerk by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -TP).

Material and labour for preparing old polished surface of table writing by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-249/ FD-275).

Material and labour for preparing old polished surface of table writing medium by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -TP).

Material and labour for preparing old polished surface of teapoy by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-232/ FD-278).

Material and labour for preparing old polished surface of side board by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drawing -FD-241).

Removing of old unserviceable arms of sofa set 5 seater (Long piece 3 seater) and material and labour for arms made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack /cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed. (Drg No FD-281/373)

All as per serial item No.41 here-in-before but for front legs

All as per serial item No.41 here-in-before but for rear legs

All as per serial item No.41 here-in-before but for wooden frame for back

All as per serial item No.41 here-in-before but for wooden batten for seat

All as per serial item No.41 here-in-before but for wooden batten for back

All as per serial item No.41 here-in-before but for bottom rail long

Removing of old unserviceable arms of sofa set 4 and 5 seater and material and labour for arms made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack/ cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed. Drg No. FD-281/373

All as per serial item No. 48 here-in-before but for front legs

All as per serial item No. 48 here-in-before but for rear legs

All as per serial item No. 48 here-in-before but for wooden frame for back

All as per serial item No. 48 here-in-before but for wooden batten for seat

All as per serial item No. 48 here-in-before but for wooden batten for back

All as per serial item No. 48 here-in-before but for bottom rail long

Supply and fix for foam cushion of 100mm thick (40 density), size of cushion shall be 530mm x 555 mm x 100mm of make Sleepwell/ Kurlon/ Smart as approved for seat and back of sofa set duly covered with long cloth tapestry cloth of worth not less than Rs.300.00 per metre of approved quality and shade including removal of existing rubber cushion of any size and thickness complete including provision of zip at one side of cover, rest all shown on drawing, complete all as specfied and as directed. Drawing No. FD-281/373

Supply and fix for cushion cover of good quality long tapestry cloth rate not less than Rs.300.00 per metre and as sample approved by GE with provision of Zip at one side of cover, rest all as shown on drawing including removing of unserviceable tapestry cloth from the existing sofa foam cushion complete all as specified and as directed. Drawing No. FD-281/373

Removing of old unserviceable legs of table centre and material and labour for legs made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack/ cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed. Drawing No. FD-274

All as per serial item No. 57 here-in-before but for top rail.

All as per serial item No. 57 here-in-before but for bottom rail.

All as per serial item No. 57 here-in-before but for bracket.

Removing of old unserviceable legs of peg table and material and labour for legs made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack/ cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed. Drawing No. FD-277

All as per serial item No. 61 here-in-before but for top rail.

All as per serial item No. 61 here-in-before but for bottom rail.

All as per serial item No. 61 here-in-before but for bracket.

Removing of old unserviceable legs of teapoy and material and labour for legs made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack/ cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed. Drawing No. FD-278

All as per serial item No. 65 here-in-before but for top rail.

All as per serial item No. 65 here-in-before but for bottom rail.

All as per serial item No. 65 here-in-before but for bracket.

Removing of old unserviceable legs of table 900 x 600 x 760mm with/ without and material and labour for legs made out of 1st class hard teak wood including preparing the surfaces by filling the holes/ crack/ cavities with wooden filler/ bees wax, making the surfaces smooth and applying two or more coats of french polish till the desired finish is obtained including provision of rubber shoes to legs complete all as specified and as directed.Drg No.FD-283/ 284.

All as per serial item No. 69 here-in-before but for top rail.

All as per serial item No. 69 here-in-before but for bottom rail.

All as per serial item No. 69 here-in-before but for bracket.

Removing of old unserviceable board and supply and fix for top of table 900mm x 600mm x 760mm with or without drawer with 18mm thick pre-laminated particle board with one side teak finish and other side white, Grade-1, exterior grade with 1st class hard wood (Teak wood) edging 6mm thick all around complete all as specified and as directed. Drg No. FD-283/284

All as per serial item No. 73 here-in-before but for table centre. Drg No FD-274

All as per serial item No. 73 here-in-before but for teapoy. Drg No. FD-278

All as per serial item No. 73 here-in-before but for peg table. Drg No. FD-277

Material and labour for base frame alongwith legs for side board similar to the existing, made out of 1st class hard wood (Teak wood) after removing old/ damaged base frame including polishing complete all as specified and as directed. Rest all as per drawing. Drg No FD-241.

Material and labour for complete cabinet with shelf of side board, made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, Grade-1, exterior grade, complete with 6mm thick 1st class hardwood (Teak Wood) edging after removing old/ damaged cabinet duly polished comp all as specified and as directed. Rest all as per drawing. Drg No FD-241

Material and labour for shutters to the side board (Two Nos) with piano type hinges after removing old/ damaged shutter made out of pre-laminated particle board 18 mm thick with one side teak finish and other side white, Grade-1, exterior Grade with 6mm thick 1st class hardwood (Teak wood) edging all around including polishing to the edges with provision of 02 Nos powder coated knob complete all as specified and as directed. Rest all as per drg. Drg No FD-241

Material and labour for top of side board made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, Gde-1, exterior grade, with 1st class hardwood (Teak wood) edging 6mm thick all around after removing old/ damaged top including polishing to the edges complete all as specified and as directed. Rest all as per drawing. Drawing No FD-241

Material and labour for back plywood, 6mm thick to the side board after removing old/damaged back duly polshed complete all as specified and as directed. Rest all as per drawing. Drawing No FD-241.

Material and labour for drawers made out of prelaminated particle board with one side teak finish and other side white, Grade-1 exterior Grade, 12mm thick for sides and 18mm thick for front and back with 6mm thick commercial ply bottom with all around 1st class hardwood (Teak wood) beading after removing old/ damaged drawer duly polished complete all as specified and as directed. Rest all as per drawing. Drawing No FD-241

Material and labour for top of table dining 6 persons, made out of 18mm thick prelaminated particle board with one side teak finish and other side white, Grade-1 exterior grade of size 1500 x 900mm with 6mm thick first class hard wood (Teak wood) edging after removing old/ damaged duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for legs of table dining 6 and 8 persons, made out of 1st class hard wood (Teak Wood) of size 75mm x 40mm x 760mm after removing old/ damaged legs duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for top of rails of table dining 6 persons, size 100mmx 25mmx 1500mm made out of 1st class hard wood (Teak wood) after removing old/ damaged rail duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for corners of table dining 6 and 8 persons with 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) after removing old/ damaged corner duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for top of table dining 8 persons made our of 18mm thick prelaminated particle board with one side teak finish and other side white exterior grade of 1800mm x 900mm with 6mm thick first class hard wood edging after removing old/ damaged top duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for top rails of table dining 8 persons, size 100mm x 25mm x 1800mm made out of 1st class teak wood after removing old/ damaged rail duly polished complete all as specified and as directed. Rest all as per drawing. Drg No FD-273.

Material and labour for top of table writing of size 1145mm x 600mm made out of 18mm thick prelaminated particle board with one side teak finish and other side white, grade-1 exterior grade, with 6mm thick 1st class hard wood (Teak wood) edging all around after removing old/ damaged top duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for shutter of table writing made out of 18mm thick prelaminated particle board exterior grade with one side teak finish and other side white, grade-1 of size 430mm x 360mm with three side 1st class hard (Teak wood) edging after removing old/ damaged shutter duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for drawers of table writing made to shape and base with 6mm thick commercial ply wood, BWR grade and sides with 12mm thick pre-laminated particle board exterior grade with one side teak finish and other side white, grade-1, with 1st class hardwood (Teak wood) edging 6mm thick all around after removing old/ damaged drawer duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for top rail of table writing of size 25 x 50 x 700mm made out of Ist class hard wood (Teak wood) after removing old/ damaged rail duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275

Material and labour for bottom rail table writing of size 20 x 50 x 1145 mm made out of 1st class hard wood (Teak wood) after removing old/ damaged rail duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for stiffener of table writing of size 25 x 50x 600mm made out of Ist class hard wood (Teak wood) after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for legs of table writing of size 55 x 35x 760mm made out of Ist class hard wood (Teak wood) after removing old/ damaged legs duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275.

Material and labour for box of table writing of size and shape as per drawing after removing old/ damaged box duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-275

Supply and fix for top of table bed side of size 450 x 230mm made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, grade-1, exterior grade with 6mm thick 1st class hard wood (Teak wood) edging all around duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drawing. Drg No FD-276.

Material and labour for back of table bed side of size 450 x 510mm made out of 6mm thick plywood, commercial, BWR grade duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No FD-276.

Supply and fix for side table bed side of size 230 x 510mm made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, grade -1, exterior grade with 6mm thick 1st class hardwood (Teak wood) edging all around duly polished after removing old/ damaged one complete all as specified and as directed. Rest all as per drawing. Drg No FD-276.

Material and labour for table bed side shelf of size 230 x 450 mm made out of 12mm thick pre-laminated particle board with one side teak finish and other side white, grade-1, exterior grade with 6mm thick (Teak wood) edging all around duly polished after removing old/ damaged shelf complete all as specified and as directed. Rest all as per drg. Drg No FD-276.

Material and labour for mirror of table dressing ladies of size 1220 x 366 x 5mm thick, electro copper plated mirror with back of 6mm thick ply wood commercial, BWR grade duly polished after removing old/ damaged mirror complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for mirror frame of table dressing ladies of size 25 x 19 mm all around made out of Ist class hard wood (Teak wood) duly polished after removing old/ damaged frame complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for wooden member back of dressing mirror (ladies) of size 45 x 40 x 1550mm made out of 1st class hard wood (Teak wood) duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for top of table dressing ladies size of 380 x 900mm made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, grade-1 with Ist class hard wood (Teak wood) edging 6mm thick duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for sliding glass shutter mirror of table dressing ladies of size 270 x 300mm x 5mm thick after removing old/ damaged sliding glass shutter complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378.

Material and labour for back made out of 12mm thick plywood, commercial, BWR grade size of 380 x 900mm duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378.

Material and labour for Aluminium channel of size 12 x 22 x 550mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for Aluminium channel of size of 12 x 22 x 380mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378

Material and labour for legs of mirror table dressing ladies of size 45 x 45x 150mm made out of Ist class hard wood (Teak wood) after removing old/ damaged legs duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for side stiffener of table dressing ladies of size 40 x 25 x 380mm made out of 1st class hard wood (Teak wood) after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for front stiffener of table dressing ladies of size 40 x 25 x 900mm made out of 1st class hard wood (Teak wood) after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378.

Material and labour for base frame alongwith legs of book case similar to the existing one made out of 1st class hard wood (Teak wood) duly polished after removing old/ damaged base frame complete all as specified and as directed. Rest all as per drawing. Drg - FD-237.

Material and labour for complete cabinet with shelf of book case made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, Grade-1, exterior grade, complete with 6mm thick 1st class hardwood (Teak Wood) edging duly polished after removing old/ damaged cabinet complete all as specified and as directed. Rest all as per drawing. Drg - FD-237.

Material and labour for shutters of book case (Two Nos) with piano type hinges after removing old/ damaged shutter made out of pre-laminated particle board 18 mm thick with one side teak finish and other side white, Grade-1, exterior Grade with 6mm thick 1st class hardwood (Teak wood) edging all around including polishing to the edges with provision of 02 Nos powder coated knob complete all as specified and as directed. Rest all as per drg. Drg - FD-237.

Material and labour for top of book case made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, Gde-1, exterior grade, with 1st class hardwood (Teak wood) edging 6mm thick all around after removing old / damaged top including polishing to the edges complete all as specified and as directed. Rest all as per drg. Drg - FD-237.

Material and labour for back of book case made out of 6mm thick plywood after removing old/ damaged back including polishing to the edges complete all as specified and as directed. Rest all as per drawing. Drawing - FD-237.

Material and labour for looking mirror of table dressing gents of size 760 x 380 x 5mm thick electro copper plated with back of 6mm thick ply wood, commercial, BWR grade duly polished after removing old/ damaged mirror complete all as specified and as directed. Rest all as per drawing. Drg No. FD-230 & FD-379

Material and labour for mirror frame of table dressing gents of size 20 x 25 mm all around made out of 1st class hard wood (Teak wood) duly polished after removing old/ damaged frame complete all as specified and as directed. Rest all as per drawing. Drg No. FD-230 & FD-379

Material and labour for wooden member back of table dressing gents of size 35 x 25 x 790mm made out of 1st class hard wood (Teak wood) duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-230 & FD-379

Material and labour for top of table dressing gents of size of 300 x 900mm made out of 12mm thick pre-laminated particle board with one side teak finish and other side white, grade-1, exterior grade 1st class hard wood (Teak wood) edging 6mm thick duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drawing. Drg No. FD-230 & FD-379

Material and labour for back of table dressing gents made out of 12mm thick ply wood, commercial, BWR grade, of size 300 x 900mm duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-230 & FD-379

Supply and fix for brass knob powder coated with suitable size of screw after removing old/ unserviceable knob from table 3' x 2' with drawer, table dressing gents, Side board and table writing complete all as specified and as directed. Drg Nos. FD-273, FD-274, FD-275, FD-271, FD-230, FD-241.

Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood (Teak wood) duly polished if support required for chair writing, chair dining and chair easy complete all as specified and as directed.

Material and labour for front leg of chair writing made out of 1st class hard wood (teak wood) to match with the existing parts duly polished after removing old/ damaged legs complete all as specified and as directed. Rest all as per drawing. Drg No FD-250/280.

All as per serial item No.124 here-in-before but for rear leg.

All as per serial item No.124 here-in-before but for seat side rail (canning patti).

All as per serial item No.124 here-in-before but for seat front rail (canning patti).

All as per serial item No.124 here-in-before but for back rest.

All as per serial item No.124 here-in-before but for stiffener.

All as per serial item No.124 here-in-before but for arm rest (hands).

Material and labour for front legs of chair dining all as per respective drawings made out of 1st class hard wood (teak wood) after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No FD-279.

All as per serial item No.131 here-in-before but for rear legs.

All as per serial item No.131 here-in-before but for seat side rail (canning patti).

All as per serial item No.131 here-in-before but for front rail (canning patti).

All as per serial item No.131 here-in-before but for stiffener.

All as per serial item No.131 here-in-before but for back rest.

Material and labour for rear legs of chair easy all as per respective drawings made out of 1st class hard wood (teak wood) after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No. FD-229.

All as per serial item No.137 here-in-before but for front legs.

All as per serial item No.137 here-in-before but for seat side rail (Cane patti).

All as per serial item No.137 here-in-before but for front rail (Cane patti).

All as per serial item No.137 here-in-before but for arm rest (Hands).

All as per serial item No.137 here-in-before but for back rail (Cane patti).

All as per serial item No.137 here-in-before but for stiffener.

Supply and fix for top of teapoy varandah made out of 18mm thick prelaminated particle board with one side teak finish and other side white exterior grade with 6mm thick 1st class hard wood edging duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drg No.FD-383.

Supply and fix for plywood top 12mm thick commercial ply BWR grade to the bed hard with plywood top after taking down old/ damaged plywood top complete all as specified and as directed. Drawing No. FD/E-6/MAP/08R

Material and labour for plywood top 12mm thick commercial ply BWR grade fixed with screws to the bed with plywood top after taking down old/ damaged plywood top including preparing the old polished wooden surface of complete bed by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. Drawing FD-246.

Material and labour for head rest (board) with 3mm thick teak veneer ply facing on both side with teak wood beading after taking down old/ damaged head rest of bed with plywood top and duly polished to the head rest before fixing to the bed including preparing the old polished surface of complete bed by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. Drawing No. FD-246.

Material and labour for foot rest (Board) with 3mm teak veneer ply facing on both sides with teak wook beading after taking down old/ damaged complete foot rest of bed with plywood top and duly polished to foot board before fixing to the bed complete including preparing the old polished surface of complete bed by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. Drawing No FD-246

Material and labour for for long rail made out of 1st class hard wood (teak wood) to bed with plywood top after taking down old/ damaged rail of bed with plywood top and duly polished with french polish glossy finish complete all as specified and as directed. Drg No FD-246

Material and labour for stiffener of size 40mmx60mmx900mm made out of 1st class hard wood (teak wood) after taking down old/ damaged stiffener to support plywood top and duly polished with glossy finish complete all as specified and as directed. Drg No FD-246.

Material and labour for bracket made out of 1st class hard wood teak wood triangular type size of 40mmx 130mm x 180mm after taking down old/ damaged bracket and fixed with sutaible size of screw at meeting place of legs and long rails duly polished complete all as specified and as directed. Drg No FD-246

Material and labour for preparing old polished surface of Stool Dressing CB by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD- 252).

Material and labour for preparing old polished surface of Stool Dressing Cushioned by removing stains/ spots with sand paper, filling the holes/ crack/ cavities with wood filler/ bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed. (Drg - FD- 374).

Supply and fix for pegs of Hat stand with mirror duly polished after removing old/ damaged pegs complete all as specified and as directed. Rest all as per (Drg No.FD-361).

Material and labour replacement of existing long rail of GI Charpoy with new long rail made out of 32mm dia medium grade GI pipe complete all as specified and direced . (Drawing No FD-220)

Material and labour replacement of existing short rail with made out of long rail obtain from item from 152 above including necessary threading at both ends as required complete all as specified and direced . (Drawing No FD-220)

Material and labour replacement of existing legs made out of short/ long rail obtain from item from 152 & 153 above including necessary threading at one end, providing 3mm thick MS round base plate 5cm dia, welded at bottom to match with existing legs and provision of MNF clamp suitable for19mm dia conduit pipe complete all as specified and direced . (Drawing No FD-220)

Material and labour replacement of existing unserviceable 3 way GI elbow with new 3 way GI elbow to suitable for 32mm dia pipe including treading complete all as specified and directed (Drawing No FD-220).

Material and labour replacement of existing unserviceable check nuts with newnew GI check nuts suitable for 32mm dia pipe complete all as specified and directed (Drawing No FD-220).

Material and labour for minor repair like tightning of any part of GI charpoy including minor welding if required complete all as specified and directed (Drawing No FD-220).

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Green Leaf Electricals