Construction of Bye-Pass road of OIL Township at Moran starting from NH-37 at Moran town to NH-37 at Khatkhati under deposit work of Oil India Limited, Duliajan (Phase-III) Package I from Chainage 1090.00m to Chainage 2480.00m under PWD, Charaideo Di

Amount

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. (i) By Manual Means:- A. In area of light jungle.

Cutting of Trees, including Cutting of trunks, Branches and Removal : Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 m and earth filling in the depression/pit. ii) Girth from 600 mm to 900 mm.

Scarifying existing bituminous surface to a depth of 50 mm by mechanicalmeans (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.

Excavation in Soil by Manual Means. (a) (Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.)

Construction of Embankment with Material Obtained from Borrow Pits : Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.2 (Including compansation of arth.) (Including cost of testing of materials at site and laboratory as directed by the deptt.) a) From Private Land

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table ( 300-2 ) (including compensation of earth.) (a) (Including cost of materials at site and laboratory as directed by the deptt.) (a) private land

Granular Sub-base with coarse graded materials : Construction of Granular Sub-base by providing coarse Graded Material, spreading in uniform layers with motor graded on prepared surface, mixing by mix in place method with rotavator at OMC and compacted with vibratory roller to achieve the desired density complete as per cl.401( with an Initial lead of 5.0Km) II)For Grading II Material

Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber, applying and booming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density (With an initial lead of 5.0km) (A) By manual means II) Using Grading II c) Using Screening Type B

Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber, applying and booming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density (With an initial lead of 5.0km) A) By Manual Means III) Using Grading III c) Using Screening Type B

Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.)( Including cost of testing of materials at site and laboratory as directed by the deptt.) (ii) With bitumen emulsion-CSS-1 (IS-8887-2004)

Providing and applying tack coat with bitumen emulsion using emulsion(RS-1) emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.) (II)With Bitumen emulsion RS-1 (c) Granular surfaces treated with primer

Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a pr( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) ( Including cost of testing of materials at site and laboratory as directed by the deptt.) B. (b) With anti stripping agent as per IS:14982( Refer Appendix-5 of MoSRT&H specification) '(i)with 60/70 or VG-30 grade paved bitumen (ii) for GradingII(19 mm nominal size)

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder@ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. ( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratoryas directed by the deptt.) (C) (a) With rock dust as filler ( refer table 500-9 of MoSRT&H specification) & anti stripping agent as per IS:14982( Refer Appendix 5 of MoSRT&H specification) I)'with 60/70 or VG-30 grade bitumen (ii) for GradingII(10 mm nominal size)

Providing and laying Interlocking Concrete Block Pavement (ICBP) with M40 grade of concrete blocks having thickness 80mm as per Technical specification clause 1504 complete including carriage a) including Edge block/Edge restraints

c) Coloured Inter Locking Block Pavement

Retro reflectorised Traffic Sign, ii) 60 cm equilateral triangle

Retro reflectorised Traffic Sign, iii) 60 cm circular

Retro reflectorised Traffic Sign, iv) 80 cm x 60 cm rectangular

Direction and place identification sign upto 0.9sqm size board. Providing and erecting direction and place identification retro-reflectorised signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Kilometer stone: ( Reinforced cement concrete M-15 grade kilometer stone of standard design as per IRC-8-1980, fixing in position including painting and printing etc) ii) Ordinary Kilometer Stone

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud.

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. I.. Ordinary soil / A. Manual means / (I) Without dewatering /(i) Upto 3 m depth

Stone masonary work in cement mortar 1:3 in foundation complete as per drawing and Technical specification.(b)1405. 3:- Random rubble Masonary

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203.A With crushed Stone I P.C.C grade M 10

Plain/Reinforced cement concrete, in sub-structure complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser. (A) 'RCC Grade M20

Reinforcement in foundation: Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and technical specifications, (b) With TATA make d TMT rebar

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification B.Sandy material

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser. (A) 'PCC Grade M20

Painting on concrete surface (Providing and applying 2 coats of water based cement paint to unlpastered concrete surface after cleaning the surface of dirt,dust,oil,grease, efflorescence and applying paint @ of 1 litre for 2 sqm)(A) For Plain Surface

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser. (A) 'PCC Grade M 15

Plain/Reinforced cement concrete, in sub-structure complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser. (A) 'PCC Grade M20 a) Heifht upto 5 m case 1: using concrete mixer

M/S B.B. ENTERPRISE