Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹48.5 L+₹2.7 L (5.80%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹49.3 L+₹3.4 L (7.48%)Rejected-AOC H NO 767 NEAR OLD POST OFFICE NEW VADDEM VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹49.4 L+₹3.5 L (7.63%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹49.6 L+₹3.7 L (8.03%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOMANTAK
GE Gomantak Vasco Da Gama Pin 403802
Repair and Maintenance of Day to Day Complaints of Officer Married Accommodation at NOFRA I under AGE BR II in GE Gomantak Vasco
2024_MES_647673_1
8615/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹90,000
Yes
20 Jul 2024
23 Mar 2024
22 Apr 2024
23 Mar 2024
20 Apr 2024
7 Apr 2024
Amount
Demolition of Brick Work/ sone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed.
M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.
Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.
M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished fair and even complete all as specified and directed.
M&L 5 mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC @ 200 ml per bag of cement finished fair and even complete all as specified and directed. Note: WPC will be measured and paid seperately.
M&L for applying 3 mm thick putty on ceilling surfaces and applying two coat of oil bond distemper including preparation the surfaces complete all as specified and directed.
Supply only liquid waterproofing compound.
M&L for applying one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new wall surfaces complete all as specified and directed.
M&L for applying two coats of Anti fungal paint over a coat of primer to match the existing colour including preparation of newly plastered surface of wall and necessary scaffolding complete all as specified and directed.
Material and labour for one coat of oil bound distemper on wall including preparation of old plastered surfaces complete all as specified and directed.
M&L for preparing old decorated surfaces plastered on walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and applying two coat of oil emulsion weather proof or water proof paint over a coat of primer complete including necessary scaffolding complete all as specified and directed. Note for item No. 7 to 12 : Rate quoted by contractor shall include washing floors, removing all spots, cleaning glass, joinery, electrical fittings, wiring etc. complete all as directed at site.
Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L glazed ceramic coloured tiles 450 x 300 x 6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L Non Skid ceramic coloured tiles (also in patches ) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screeding in CM 1:6 complete all as specified.
M&L Vitrified Ceramic tiles 9 to 10 mm thick light shade (also in patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished to mirror finished) fixed as in steps, jambs, pillars, window cills, cooking plateform, WHB palteform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 including demolition of existing slab complete all as specified and directed.
Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for 25mm thick PCC 1:2:4, type B-1, using 20 mm graded stone aggregate, in base to floor tiles complete all as specified and directed.
M&L for 75mm thick cement concrete type C-1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement including filling the joints with and including bitumen and sand 13 by weight complete all as specified and directed.
Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including making good the wall surface complete all as specified and directed.
Taking down Chowkhats or frames exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters (without taking off shutters from the frames) and including making good the wall surfaces complete all as directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each complete all as directed.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F aluminium powder coated frame and shutters for partition / windows/ ventilators/ doors sliding/ fixed/ openable type complete with necessary fittings such as two aluminium handle 100 mm long or handle cum lock for each window, roller etc and fixing all as speciefied and directed.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 complete all as specified and directed.
S&F second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed.
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm long (ISI marked) complete all as specified and directed.
S&F 150 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.
S&F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling in hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in repair 18 mm thick prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in shutters of Cup Boards with Wooden beading of size 18mm x 6mm around edges and varnishing / french polishing of beading incl removing old board of any descriptions complete as specified and directed.
S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete as specified and directed.
S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete as specified and directed.
S & F 100 mm long Aluminium handles, cast type (ISI marked) complete as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description ) from wooden/steel frames glazed with putty or fixed with beads upto 1.5 sqm complete all as specified and directed.
S&F figured glass, 4 mm thick, pin head type and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F Sheet glass 4 mm thickness, ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including all fixing arrangement of wiremesh complete all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters rate including removal of wiremesh, aluminium grills/ aluminium window shutters wherever required and refixing them in position after fixing of wiremesh complete all as specified and directed.
S&F in repair 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F in repairs butt hinges cold rolled mild steel 100 mm long medium weight fixed to angle iron chowkhat complete all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 200 mm (ISI marked) complete all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed.
S&F in repair extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm complete all as specified and directed.
S&F in repair 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
S&F in repair extruded aluminium alloy handles fabricated type 100 mm size complete all as specified and directed.
S&F in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
S&F in repairs for 1 mm thick Steel Plate Rack size 1.2m x 0.90 m complete as specified and directed
S&F in repair curtain rod fancy type, made out of 25mm dia aluminium powder coated duy PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed.
S&F in repair 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and complete all as specified and as directed.
M&L for 4 mm thick Non asbestos fiber cement building board / E-board for ceilling incl aluminium powder coated GI frame (snapgrid) of size 605 x 605 mm, main runner 38 x 24 mm sheet thickness 0.4 mm, cross tee 28 x 24 mm sheet thickness 0.3 mm and wall angle 24 x 24 x 0.3 mm fixed with hangers 6 mm dia GI (upto 1200 mm lenght) adjusting level type fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fastners 12.5 mm, 40 mm long of standard section as per manufacturers instructions complete all as specified and directed.
S&F PVC door bottom weather strip door brush sweep seal fixed complete all as specified and directed.
Attending complaints relelated to carpentary works which includes repair/easing of door, window, refixing or rectfing of door, windows, pelmet, curtain rod, tighting of loose wire gauge, refixing of tower bolt, handles, hinges, sliding door bolt etc with nails, screw to make door/windows functional to attend the complaint by deploying one carpenter with 01 helper for day to day maintenance timing from 0830 hrs to 1730 hrs, (to be called on Sunday or holiday in case of any urgent work). Note:- (i) All T&P and Necessary Nail, Screws, Ladder, Welding eqpt and machine Set etc. will be provided by the the Contractor for smooth working. (ii) The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (iii) In case If Contractor fail to attend the complaint on same day a recovery of Rs 350.00 per day per complaint shall be made from his dues. (iv) Items issued under complaint slip out of supply only items shall be recorded in MB with reference to complaint slip docket No or Number of complaint and old material retrieved shall be issued to contractor under Credit Schedule.
Supply only 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium
Supply only aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick
Supply only butt hinges cold rolled mild steel 100 mm long medium weight
Supply only aluminium anodized, barrel tower bolt of extruded section, 200 mm (ISI marked)
Supply only aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked)
Supply only extruded aluminium alloy handles fabricated type 150 mm size
Supply only 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
Supply only extruded aluminium alloy handles fabricated type 100 mm size
Supply only 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete
Supply only 1 mm thick Steel Plate Rack size 1.2m x 0.90 m complete as specified and directed
Supply only curtain rod fancy type, made out of 25mm dia aluminium powder coated duy PVC sleeved, fancy type plastic finial, decorative type and mild steel prepainted/PVC coated brackets (Bracket and plastic finial 6 pairs per 5 mtr of length)
Supply only 12 mm plywood grade BWR, type BB
Supply only PVC door bottom weather strip door brush sweep seal
S&F in repair WC seat cover of different shape and size sutaible for EWC floor/ wall mounted seat, colour match with existing EWC seat complete all as specified and directed.
S&F in repair 200mm dia Towel ring of brass chromium plated and including chromium plated brass screws wooden / plastic cleats complete all as specified and directed and as approved by GE
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair PVC waste pipe flexible type 25 mm dia suitable for couplings 32mm & 40mm dia 600 mm long complete all as specified and directed.
S&F in repair PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15 mm size with 2 PTMT nuts of length 600 mm, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.
S&F designer wall mounted or flat for floor vitreous China Wash down Water Closet Pan (Pedestal Pattern) White, including attached flush tank having 10 Ltr capacity push button including fixing arrangements with Plastic Water Closet Seat, white complete all as specified and directed.
S&F in repair Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, white, Closed Pattern with Recessed Bottom and Cover or wall mounted seat including Mild Steel Chromium Plated Aluminium Hanging Device and making Good disturbed Surfaces with Cement Mortar 1:3 complete all as specified and as directed.
S&F in reapir Vitreous China Wash Hand Basin 630 x 450 mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, Galvanised Iron ‘Light Grade’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and complete all as specified and directed.
Taking up or down 25 mm dia steel tubing and connection and removal from site complete all as specified and directed
Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed
Supply, fixing, laying & testing CPVC pipes 20 mm SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Supply, fixing, laying & testing CPVC pipes 25 mm SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Dismantling of PVC existing water tank of exc. 500 ltrs & not exc. 1000 ltr capacity including taking down from roof/staging and removing from site complete all as specified and directed.
Dismantling PVC water tanks exc. 250 ltrs but not exc. 500 ltrs for the following size including taking down from roof/staging and removing from site complete all as specified and directed.
S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position all specified in MES Schedule Part-I, fixed with tank nipple, union, float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed.
S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position all specified in MES Schedule Part-I, fixed with tank nipple, union, float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed.
S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down long size and high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair 15 mm nominal bore Chromium plated, fancy type, Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 15 mm nominal bore Bib taps, long body fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, with bleaching power, brush from mouths of circulating pipes etc capacity exc 250 and not exc 1000 Ltr each including write date of cleaning and next due date complete all as specified and directed. Note :- Each tank will be cleaned twice during currency of work and willbe measured seperately each time.
S&F in repair PVC Tank covers of 300 ltrs, 500 ltr and 1000 with PVC nuts & bolts and rounded autolock ISI Mark complete all as specified and directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore complete all as specified and directed.
S&F in repair Brass Chromium Plated Soap Dish, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.
S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with minimum 1 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F in repair CP Grating doom 100 mm dia of (Minimum weight) complete all as specified and directed.
S&F in repair Angle Cock 15 mm Bore (dia), Standard of PTMT, any Colour high pressure screwed for Iron Pipe minimum weight not less than 90 Grams complete all as specified and as directed.
S&F in repair Bib Tap 15mm dia, Standard of PTMT, any Colour, screwed for Iron Pipe minimum weight not less than 90 Grams complete all as specified and as directed.
S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair chromium Plated Toilet paper holder with Paper roll as Approved complete all as specified and directed.
S&F in repair PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560 x 410 mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag
S&F in repair two-in-one Bib Taps 15mm Bore, Cast Copper Alloy with crutch or butterfly handle screwed down, screwed for Iron Pipe or for Brass Ferrule complete all as specified and as directed.
S&F in repair Towel rail of brass chromium plated 900 mm long with and including chromium plated brass screws wooden / plastic cleats complete all as specified and directed and as approved by GE
S&F in repair, High pressure PVC connection pipes 36" long with chromium plated nuts complete all as specified and directed. Make :- Nixo- Cat No- AE06/Shakti
S&F in repair Glass shelf with CP railing (22 x 6") complete all as directed Make:- Nixo-Cat part no- ES01A/Hilife/Cera/Prayag
S&F in repair, Glass corner shelf with CP railing(12" x 12") complete all as directed Make-Nixo-Cat no-ES03A/Hilife/Cera/Prayag
S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.
Adjustment of the float valve or ball valve or lever or handle without replacement of any part of the high level cistern & OHT of any size, Petty repair for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixure, concealed stop cock etc. of any description any size by cleaning washer/jumper wall etc., removal of air lock/blockage of water in GI tubing 15/20mm bore incl taking down (if required) cleaning the pipe or fitting etc. and refixing the same in position attending all complaint connected with plumbing work and water supply work complete all as specified and directed. Note : (i) The rates quoted in the above item includes cost of T&P like screw driver etc. complete. (ii) Minimum 02 plumber shall be deployed by contractor and they shall be present on all working days (to be called on Sunday or holiday in case of any urgent work). from 08.30 hrs to 1700 hrs for maintenance of above mentioned work The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (iii) In case If Contractor fail to attend the complaint on same day a recovery of Rs 350 per day per complaint shall be made from his dues. (iv) Items issued under complaint slip out of supply only items shall be recorded in MB with reference to complaint slip docket No or Number of complaint and old material retrieved shall be issued to contractor under Credit Schedule.
Supply only WC seat cover of different shape and size sutaible for EWC floor/ wall mounted seat
Supply only chromium plated tubular towel ring 20 mm dia
Supply only PVC connections 15mm size with PTMT nuts of length 600 mm
Supply only PVC waste pipe flexible type 25 mm dia suitable for couplings 32mm & 40mm dia 600 mm
Supply only PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle
Supply only 20 mm CPVC Union
Supply only 25 mm CPVC Union
Supply only MS nails 24 to 36 mm long
Supply only CPVC Pipe 20 mm dia
Supply only CPVC Pipe 25 mm dia
Supply only CPVC Elbow 20 mm
Supply only CPVC Elbow 25 mm
Supply only CPVC Tee 20 mm
Supply only CPVC Tee 25 mm
Supply only CPVC Nipple 25 mm x 100 mm
Supply only CPVC Nipple 20 mm x 100 mm
Supply only CPVC Socket 20 mm
Supply only CPVC Socket 25 mm
Supply only CPVC Extension nipple 20 mm x 100 mm
Supply only CPVC Nipple 25 mm x 50 mm
Supply only CPVC Nipple 20 mm x 50 mm
Supply only two-in-one Bib Taps 15mm Bore, Cast Copper Alloy with crutch or butterfly handle
Dismantling of PVC pipe 100mm/75mm dia jointed in cement mortar and taking wall/floor etc with fitting in clean or foul condition complete all as specified and directed. .
S&F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls or in floors in clean or foul condition including clamps complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls in clean or foul condition including clamps complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Dismantling Plain or Corrugated Steel Sheeting of any gauge or similar pattern Roof Coverings complete all as specified and directed.
M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe-410-W(Gde-E-250) quality-B) complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified & directed.
Attending complaints relelated to Mason works, this includes repair of plastering, floor, hardstanding, brick work, roof repair, chajjas, PCC etc. by deploying one Mason with 01 helper for day to day maintenance timing from 0830 hrs to 1730 hrs (to be called on Sunday or holiday in case of any urgent work). Contractor will provide to the Mason necessary T&P and necessary Nail, Screws, Lad, cardies, favda, tasla, ladder for maintenance of above mentioned work. Note:- (i) The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (ii) In case If Contractor fail to attend the complaint on same day a recovery of Rs. 350 per day per complaint shall be made from his dues. (iii) Items issued under complaint slip out of supply only items shall be recorded in MB with reference to complaint slip docket No or Number of complaint and old material retrieved shall be issued to contractor under Credit Schedule.
Supply only cement 50 kg in each bag
Supply only Aggregate 20 mm
Supply only Aggregate 12.5 mm
Supply only Course sand
Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 3.00 Cum each load for upto 10.00 km including loading, unloading and stacking at the destination and depositing out side defence land complete all as specified and directed.
K M SUBHANAIAH
M/S DUBAL CONSTRUCTION
JINTECH
STAR FABRICATION
SHIVRAJ CONSTRUCTIONS
M/S. NAVEEN ENGINEERING & CO
M/S Kartik Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .