Loading
Loading…
Loading…
Tender Value
₹16.9 L
EMD Value
₹33,830
Closing Date
27 Aug 2026, 5:00 pm3d left
EE PHED DIVISION -KATHUMAR ALWAR
EE PHED KATHUMAR
Construction and commissioning of new singlw phase 150mm dia(03 Nos) Tubewell in sub division kathumarin the jurisdiction of PHED Division kathumar alwar
2026_PHCJA_589772_1
NIT EE 22/2026-27
Open Tender
Civil Works - Water Works
Percentage
45 days
EE PHED DIVISION -KATHUMAR ALWAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
EE PHED DIVISION KATHUMAR
₹33,830
Yes
18 Aug 2026
18 Aug 2026
28 Aug 2026
18 Aug 2026
27 Aug 2026
18 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water.Nominal bore 150 mm dia. | 360 | Mtr | 994 | ₹3,57,840 |
| 1.1 | Add 15% extra on above item (Item No 2.6.1 to 2.6.3) for drilling depth beyond 100 mtr, rate shall be applicable for only extra depth beyond 100 mtr . | 60 | Mtr | - | - |
| 2Construction of tube well after completion of drilling by rotary /percussion method & up to 100 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | |||||
| 2.2 | Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr. | 240 | Mtr | 1,005.1 | ₹2,41,224 |
| 3 | Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)} medium of following sizes at site of work.150 mm dia NB( Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) | 363 | Mtr | 1,933 | ₹7,01,679 |
| 4 | Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. 150 mm dia nominal bore | 72 | Mtr | 209 | ₹15,048 |
| 5 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.150 mm dia | 3 | Each | 812 | ₹2,436 |
| 6Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | |||||
| 7 | above 2.0 KW | 6 | KW | 13,050 | ₹78,300 |
| 8 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect.40 mm dia | 450 | Mtr | 87 | ₹39,150 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.97 MB
ilovepdfmerged.pdf
Tender Documents • 7.99 MB
BOQ_1047376.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].