Providing wall panel, false ceiling and internal aluminium partition arrangements for setting up Emergency Response Support System ERSS, District co-ordination centre, second floor at District police head quarters, Karaikal.

Amount

Providing and fixing Pre - laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade 1 , Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) - 18mm thick

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked , exterior grade (Grade 1) , of approved make including teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges , complete - with non decorative veneering on both sides

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door , with necessary screws etc complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete - 100 mm

Provding and fixing 1/2"tk Daikin mineral false ceiling tiles prima fine fissued regular edge or equivalent having fire propogation test of 'class O' as per B.S.476 part 6, with a flame spread of class A of US federal spec. SS/S/118B . Thermal conductivity at 0.045K cal/mhc of JIS A 1412. Noice reduction co-efficient (NRC) of 0.55-0.6of ASTMC 423,light reflectance of LR 1(>75% os ASTM C 523 ) CAC at 36 of ASTM E 413 and asbestos free and humidity resistance of RH 99% of size 600 x 600 mm with interlocking metal grid of hot dipped galvanised steel sections (galvanized at 170 gm / sqm) with pre-finished in baked polyster paint , consisting of main runners of size 24x33 mm T sections made of 0.27mm thick (minimum) sheet spaced at 1200 mm centre to centre and secondary T hot dipped galvanized teel section of size 28x24 mm made of 0.27 mm tk (minimum ) sheet with pre finished in baked polyster paint to be interlocked in between main runner at 600 mm centre to centre to form overall grid of 600x600 mm laying 15 mm thick mineral fibre false ceiling tiles in the grid suspended by hanger rods 60 cm long with bolts @ 1.2 m c/c including cutting /making openings of services like fittings , diffusers, grills, smoke detectors, etc including providing necessary wall angle of size 19 x 19 x 0.45 mm on all four sides including scaffolding etc., complete- ceiling upto 6.5 m heights

Providing , supplying fixing & cladding of aluminium rollcoated composite panel 3 mm thick material having more than 70 % of PVdf with all coatings not exceeding AAMA at 605.2-requirements , with anti-toxic low density polythene having aluminium coated with chrome or polyester , polyvinylidien fluoride of HY lar 5000 in ausimont USA & kynar 500 in Elf - Atosem will be fixed on the anodized aluminium extruded section strucutral frame for a wall panelling work with required projection by using MS -cleats / angles / aluminium 'L' angles and grooves , in ACP folding as per site requirement whereever necessary. The plain ACP folding will be reinforced by using type system. Aluminium structural frame made of standard anodized aluminium sections of size 38 mm x 28 mm approximate @ 0.490 Kg / mt fixed on the wall surface using 38 mm x 38 mm x 100 mm G.I. angle riveted on the aluminium structural frame work by using PAN /CSK/Rhd screws with aluminium 'L' angle and also filling the excess opening by using 6mm by using aluminium / Transluent / grey / black / clear or white silicon sealant gel of NC/EL/GP will be used for filling the gaps between aluminium composite panel slabs & the section. The rate is inclusive of all material, labour, errection, scaffolding charges and standard accessories at heights upto 5.5 mts

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II , in anelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre - laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings (cost of aluminiumsnap beading shall be paid in basic item) - with float glass panes of 5.50 mm thickness

Supply of 1.50 ton split type AC unit with all accessories including stabilizer ( 3 star) Panasonic / Daikin