REPAIR POLISHING PAINTING VARNISHING OF VARIOUS TYPE OF WOODEN STEEL AND TRADE PATTERN FURNITURE ITEMS AT BSO FURNITURE YARD AND MCC BASANT NAGAR

Amount

Almirah large steel with shelves and 1/2H 1/2 S (FD-1031/1033)

M/L for removing of old U/S lock of Almirah and S/F new locks 6 lever as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing of U/S handles from almirah off sorts and S/F new CP MS handle 120 mm long as approved Drg NO. FD-1031/1033

M/L for removing U/S three way locking device and S/F new locking device assy existing size complete all as specified and directed by Engineer-in-Charge. drg. Drg NO. FD-1031/1033

M/L for removing US shelf and S/F new shelf made out of 1mm thick PBI sheet complete all as specified and directed by Engineer-in-Charge. drg. Drg NO. FD-1031/1033

M/L for carry out repairs to denting /bend shelves and fixing properly complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing U/S cleats from Almirah and S/F new cleats as per existing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing U/S leg from almirah and S/F new legs made out of 1.6 mm thick PBI sheet as shown on complete all as specified and directed by Engineer-in-Charge. drg Drg NO. FD-1031/1033

M/L for U/S hinges from Almirah steel and S/F new hinges as per existiing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

Almirah Medium steel with shelves and 1/2H 1/2 S (FD-1032/1034)

M/L for removing of old U/S lock of Almirah and S/F new locks 6 lever as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing of U/S handles from almirah and S/F new CP MS handle 120 mm long as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S three way locking device and S/F new locking device assy existiting size complete all as specified and directed by Engineer-in-Charge. drg. Drg NO. FD-1032/1034

M/L for removing US shelf and S/F new shelf made out of 1mm thick PBI sheet complete all as specified and directed by Engineer-in-Charge. drg. Drg NO. FD-1032/1034

M/L for carry out repairs to denting /bend shelves and fixing properly complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S cleats from Almirah and S/F new cleats as per existing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S leg from almirah and S/F new legs made out of 1.6mm thick PBI sheet as shown on complete all as specified and directed by Engineer-in-Charge. drg Drg NO. FD-1032/1034

M/L for U/S hinges from Almirah steel and S/F new hinges as per existiing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

Charpoy GI pipe 32 mm dia (FD-220)

M/L for removing of old U/S plywood from the charpoy GI 32mm and tightening the frame properly and S/F plywood 12mm thick commercial BWR Make: Kitply/National/ duly approved by GE/ Engr in Charge with appropriate nut fully threaded with washer complete all as specified and directed by Engineer-in-Charge. . Drg NO. FD-220

M&L for replace of U/S long rail from charpoy GI and S/F new long rail 32mm dia med grade make Bansal/Tata/Jindal complete all as specified and directed by Engineer-in-Charge. drg. Drg NO. FD-220

Cutting and threading of short rails of size 810 mm from broken long rail and threaded both ends as shown on drg complete all as specified and directed by Engineer-in-Charge.

Removing of old U/S legs from charpoy GI pipe and retrieved short rail be item No 20 be used for making legs complete all as specified and directed by Engineer-in-Charge.. Drg NO. FD-220

M&L for tightening the frame of charpoy GI, duly tightening check nut and GI elbow complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for removing U/S 3 way elbow and S/F 3 way GI elbow 32mm ISI mark complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for removing U/S check nut and S/F check nut 8mm complete all as specified and directed by Engineer-in-Charge.. Drg NO. FD-220

S/F flat iron of size 40mmx5mm x 920mm long placed in between long rail in equal distance duly making of holes in each long rail/short rail with drill machine complete all as specified and directed by Engineer-in-Charge.. Drg NO. FD-220

M/L for removing of old U/S torn out nylon newar from the charpoy GI 32mm and tightening the frame properly and S/F three Nos flat iron of size 40mmx5mm x 920mm long placed in between long rail in equal distance duly making of 3 Nos holes in each long rail/short rail with drill machine. S/F plywood 12mm thick commercial BWR Make: Kitply/National/ duly approved by GE/ Engr in Charge with appropriate nut fully threaded with washer complete all as specified and directed by Engineer-in-Charge. . Drg NO. FD-220

Chair T/S with arms/without arm FD-75 (M)

Romoving the existing unserviceable broken seat and back from chair T/S and S/F new seat and back made out of I st class teak wood duly polished and wooven with 2mm wide 0.40mm thick plastic cane in Godrej pattern . Seat and back shall be fixed to frame with bolts and nuts (5 mm dia and 100 mm long) 04 nos each for seat and back . Handles are to be shaped as per drawing and duly polished and fixed with suitable steel screws as directed by Engr in Charge Drg NO. FD-75(M)

All as per item Ser No-4.1 Seat of char CBA tubular steel with arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-4.1 Back of char CBA tubular steel with arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-4.1 Seat of char CBA tubular steel without arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-4.1 Back of char CBA tubular steel without arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No 4.1 above but Arm rest of chair CB tubular with arms complete all as specified and directed by Engineer-in-Charge.

M/L for S/F of 20mm wide 3mm thick flat MS iron strip as per required length 2 Nos each for seat duly welded complete all as specified and directed by Engineer-in-Charge.. Drg NO. FD-75(M)

Table office clk steel (FD-1004)_

M/L for removing of old UNSV Top of table office clk steel and S/F New Table top made out of 18/19mm pre laminated particle Board Make - Kitply/Novapan exterior Gde-I duly beaded with 4 mm teak wood edging complete all as specified and directed by Engineer-in-Charge. Drg No FD- 1004

M&L for replacement of unsv drawer with new drawer made to shape and size with 1 mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion denting and welding or any other means to enable all the three drawers to work smoothly complete all as specified and directed by Engineer-in-Charge.

M/L for removing U/S hard rubber shoes and refix New hard rubber shoes of approved quality complete all as specified and directed by Engineer-in-Charge. Drg NoFD-1004

Table office Offr steel (FD-1006)_

M/L for removing of old UNSV Top of table office offr steel and S/F New Table top made out of 18/19mm pre laminated particle Board Make - Kitply/Novapan exterior Gde-I duly beaded with 4 mm teak wood edging complete all as specified and directed by Engineer-in-Charge. Drg No FD- 1006

M&L for replacement of unsv drawer with new drawer made to shape and size with 1 mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion denting and welding or any other means to enable all the three drawers to work smoothly complete all as specified and directed by Engineer-in-Charge.

M/L for removing U/S hard rubber shoes and refix New hard rubber shoes of approved quality complete all as specified and directed by Engineer-in-Charge. Drg NoFD-1006

Table Centre FD-274

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-274

Table Peg FD-277

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading complete all as specified and directed by Engineer-in-Charge. as per drg No. FD-277

All as per ser No 8.1 above but front top rail/side top rail /stiffner and leg of ist grade teak wood as specified in drg complete all as specified and directed by Engineer-in-Charge.

Chair revolving High Back (TP)

M/L for taking down of UNSV hydraulic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No - TP

M/L for removing UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE/Engr in Charge Drg No. FD/ TP

All as per ser item No 9.2 above but for back of chair. Drg No TP complete all as specified and directed by Engineer-in-Charge.

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No TP

M/L for removing U/S PVC moulded base assy and S/F new PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No TP

M/L for removing of old U/S handle and S/F new handlewith soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No TP

M/L replacement of PVC moulded hand rest for chair revolving H/B as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No TP

Chair revolving Low Back (TP)

M/L for taking down of old UNSV centre tilt machanism of chair recolving L/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for removing UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE/Engr in Charge Drg No. TP

All as per ser item No 10.2 above but for back of chair.complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. TP

All as per ser item No 10.5 above but for PVC moulded hand rest Assy for chair revolving L/B as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/Lfor removing of old U/S handle and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No. TP

Chair computer

M/L for taking down of old UNSV centre tilt machanism of chair revolving computer operator , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge.. Drg No. FD- TP

M/L for removing old UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE/Engr in Charge . Drg No. TP

All as per item No 11.2 above but for back of chair. Drg No. FD- TP complete all as specified and directed by Engineer-in-Charge.

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/Lfor removing of old U/S handle and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

Chair revolving chief excecutive

M/L for removing UNSV leatherite tapestry cloth, form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with leatherite tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

All as per ser item No 12.1 above but for back of chair complete all as specified and directed by Engineer-in-Charge .Drg No. FD- TP

M/L for removing old caster wheel from chair and S/F new caster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge.Drg No. FD- TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/Lfor removing of old U/S arms rest and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge Drg No. FD- TP

M/L for reomoving dust and dry cleaning to chair Rev H/B,L/B,Visitor, Computer complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for taking down of old UNSV Pneumatic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

Chair Visitor

M/L for removing of old UNSV seat and back of chair visitor and removing all rust/dust,old paint from steel surface with cleaning material apply two coat black paint SE. Drg No. FD- TP

M/L for removing UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE / Engr in Charge Drg No. FD- TP

All as per ser item No 13.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge.Drg No. FD- TP

Chair dining FD-279

M/L for removing U/S wooden back rest stiffner of chair Dining and S/F new back rest made of Ist class T/W complete all as specified and directed by Engineer-in-Charge. drg. Drg No. FD- 279

M/L for removing old UNSV broken bottom stiffner from chair dining and S/F new stiffner made out of Ist class T/W complete all as specified and directed by Engineer-in-Charge. drg. Drg No. FD- 279

M/L for removing U/S broken front legs from chair dining and S/F new front legs made to shape , the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

M/L for removing U/S broken rear legs from chair dining and S/F rear legs made to shape as the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

Removing of U/S cane from chair dining, tightening the wooden frame properly and recanning of chair with new plastic cane white 2 mm wide and 0.4 mm thick and perimeter wooven with 3mm cane as per Godrej pettern. The cane shall be made up to Sah/Premier brand as approved by GE/Engr in Charge Drg No. FD-279

Sofa set five seater with FRC (FD-281)

M/L for removing U/S foam cushion torn out tapestry cloth from sofa set five seater and S/F new foam cushion 530x500x100mm thick 32 density make Kurlon/Sleep well/ duly covered tapestry cloth as approved complete all as per drawing complete all as specified and directed by Engineer-in-Charge. (Rate of tapestry cloth not less than Rs 220/-Per Rm). Drg No. FD- 281

Hat stand with mirror (FD-233)

M/L for removing old U/S pegs from hat stand and S/F new Almn pegs complete all as specified and directed by Engineer-in-Charge. Drg No. FD-233

M/L for removing U/S mirror from hat stand and S/F new mirror 5mm thick as per drg .Mirror shall be King Fisher/Atul/Modi Guard as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD-233

Book Case With Locker (TP)

Supply of New Book case Locker size 33"x15"x70" student special. Model No. ESC/SF/07 make Empire safe Co/ (Royalkoas) or Equivalent model of godrej as directed by Engineer-in-Charge

Show case wooden (TP)

Supply of New Show casewooden with lock & key. Size : 1200x900x400mm. Make Empire safe Co/ (Royalkoas) or Equivalent model of godrej as directed by Engineer-in-Charge

Chair Computer (TP)

Supply of New Chair Computer Model No: ESC-77 Make Empire Safe Co. (RoyalKoas) Or equivalent model of Godrej. All As directed by Engr-in-Charge.

Table Computer Wooden (TP)

Supply Of New Table Computer Wooden Model No ESC/CT/24 Make Empire Safe Co. (RoyalKoas) Or equivalent model of Godrej. All As directed by Engr-in-Charge.

Low Back Revolving Chair

Supply of New Low Back Revolving Chair :- High density P.U. in seat & back , tilting mechanism , gas lift, wooden arms & wooden base Model No :- ESC-21 make Empire Safe Co.(Royal Koas) or equivalent model of Godrej all as directed by Engr-in-Charge.

High Back Revolving Chair

Supply of New High Back Revolving Chair :- High density P.U. in seat & back , tilting mechanism , gas lift, wooden arms & wooden base Model No :- ESC-20 make Empire Safe Co.(Royal Koas) or equivalent model of Godrej all as directed by Engr-in-Charge.

Spot welding

Spot welding to steel furniture at site complete all as specified and directed by Engineer-in-Charge.

Polishing of the wooden furniture prepare the existing surface of wooden furniture of any description by applying sand paper removing the stains and filling the bore holes , cracks by putting fevicol and wooden putty etc and apply two coat of french spirit Polish to the exposed surface polishing shall be uniform and shall be glossy finish for the following items complete all as specified and directed by Engineer-in-Charge. :-

Table Peg Drg No. FD-277

Table centre Drg No. FD-274

Teapoy wooden Drg No. FD-276

Chair dining Drg No. FD- 262

Sofa five Seater (3+1+1)

Hat stand with mirror

Preparing the old painted surfaces by sand papering deserting removing dents and bents and filling with putty (metal paste) painting with synthetic enamel paints one coat (external and internal) to give glossy finish as per approved colour as directed by Engr in Charge for the following items complete all as specified and directed by Engineer-in-Charge. :-

Almirah large steel

Almirah Med steel

Table office clk steel

Table office offr steel

Chair Tub steel with arms

Chair Tub steel with out arms

Rack Steel enclosed with shelves (1885x900x300)/1905x915x610

Rack side steel 3 spaces

Rack Side Steel 711 x 685x 254 mm

M/s Kapil Furniture

SMS Enterprises