PROVISION OF SIDE WALKWAY ALONG THE APPROACH ROAD AT ICGAS RATNAGIRI.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones, etc. not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out in hard / dense soil complete all as specified and directed.

Material & Labour for forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5m high from base complete all as specified and directed.

Removing excavated materials exceeding 250 Metre not exceeding 500 Metre and depositing where directed at a level not exceeding 1.5 metre above the starting point.

Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate Cement concrete as in foundations, filling and mass-concrete complete all as specified and as directed.

Material and labour for machine cut laterite stone masonry wall exceeding 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

Material & Labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. Notes: (i) The Kerb Stoe shall be cast in situ at site using paver (ii) The rate quoted by the contractor include submission of Design Mix of M-25 grade concrete.

Material & Labour for Broken stone Broken or Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in base concrete complete all as specified and as directed.

Material & Labour for Coloured, Heavy duty, Non-Skid Ceramic tile 15 to 20 mm thickness of approved shade and pattern, of area exceeding 0.02 Sqm but not exceeding 0.16 Sqm each, combination of light and dark shade with natural stone matt finished as outdoor areas such as Veranda, path, parking areas of approved design and colour as decided by Engineer In charge, floor set and jointed in cement slurry, and pointed with epoxy grouted with suitable pigment (mixed with white cement) to match the colour of tiles complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Material & Labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed.

Material & Labour preparation of new or previously untreated surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width not otherwise described for & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/s. P S REDDY (BID ID -3283715)

M/S Chadha Brothers (BID ID -3279716)

LAXMI ENTERPRISES (BID ID -3283639)

K M SUBHANAIAH (BID ID -3279881)

m/s Pravin s Bhosale (BID ID -3279489)