Remaining works for construction of Vegetable Market Fish Market and Shopping Complex at Moti Daman and Fish Market and Shopping Complex at Nani Daman

Works

Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

Providing and laying polished Kota stone slab flooring and ramp patti over 20mm (Average) thick base of cement mortar 1:6 (1‐cement : 6‐coarse sand) or L.M. 1.1.5 (1‐Lime putty :1.5 ‐ coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including ramp patti ,rubbing . complete. (A) 25mm thick (upto 10 ton) INCLUDING FLOORING SKIRTING

Providing and laying polished kota stone slab 25 mm thick in risers of steps. Laid on 10 mm thick cement mortar 1:3 (1-cement;3-coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing etc. complete(upto 10 ton)

Providing and laying White Glazed tiles 6 mm thick, in skrting risers of step and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton) etc. complete as per EIC.

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 2.1M. as per approved by architect. COMPLETE EIC

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 2.1M. as per approved by architect. COMPLETE EIC with india teak wooden pati including fitting moulding and polishing for passage railing

Providing and fixing Round window having extruded upvc cottng section frame main outer size 30mm x 20mm x 5mm , horizontal door member size 25mm x 20mm x 5mm, vertical member of size 25mm x 20mm x 5mm with 5 mm thick transparent tuffen glass etc complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1cement: 3-fine sand) etc complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Fish Counter. Size- 1.0mx0.9mx.90m and .450mX.750m as per approved by architect. COMPLETE EIC

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Fish Counter. Size- 1.5mx0.9mx.90m and .450mX.750m as per approved by architect. COMPLETE EIC

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Fish Counter. Size- 2.0mx0.9mx.90m and .450mX.750m as per approved by architect. COMPLETE EIC

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Vegetable Counter. Size- 1.80mx0.9mx.90m as per approved by architect. COMPLETE EIC

Providing and fixing and moulding 5 mm thick FRP Coating with EPOXY PAINT as per approved shade including cleaning rubbing and making surface in proper shape and level. Applying F.R.P. Material on site in line and level with smooth and even finish, Complete in line and level as directed..

Providing and fixing FRP GRATING drainage cover for Size 1000mm X 538mm X 38mm complete factory made with perforated and plain surface , including transportation, fixing in position complete as directed.

Providing and laying dedo of vitrifide tiles 120cm x 60 cm including fixing with approved chemical of appropriate thickness,complete with 5 mm thick grove. filling, grouting and finising as per approved by architect. COMPLETE

Making core cutting for fixing pipe 150 mm dia in RCC slab/wall/beam up to 380 mm wide ( length of core cutting) and as directed by engineer in charge.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, by spraying with spraying machine, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Painting two coats on new steel and other metal surface with Dico paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing Haimaring tred non sleepary on the edge of tread as protective measure of Size 1500 mm X 50mm X 3mm Complete Etc.

Extra for providing material and labour for Epoxy Grouting the joints of any type of flooring/ cladding tiles for all required Size having joints of 3mm width and in full depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.

providing and fixing 8mm thick lexan polycarbonate multiwall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 X 3 mm etc . Complete as directed by engineer incharge. (Make specified as per appendix-1)

Providing and fixing GPS single sided tower clock system of the size of 2.4 mt. diameter with including necessary installations systems as Clock body, hands setof clock dial,GPS based clock movementwith sensors, GPS antena, GPS drivers, battery back-up for 12 hours, power supply and battery chargers with also including other necessary fittings and installation assistance and including transportations charges, no other charges to be paid, all directed by EIC/Architect.

SITC of UL Listed, Analogue Addressable Microprocessor based 06 loop fire alarm control panel expandable up to 10 loop capable of taking minimum 125 detectors and 125 devices per loop like MCP, Hooters, control modules, response indicators etc. and shall contain central processing unit, LCD Display up to 960 character as per the detailed specification complete with battery backup of 24 hours operation and 30 minutes alarm operation with battery charger and annunciator window etc. System shall have provision to integrate with life safety facilities. i.e. HVAC, PA Lift or elevator by providing NO/NC contacts and BMS compatibility shall be through MODBUS/Bacnet protocol. The Panel shall be UL Listed / FM Approved.

SITC of Active Repeater panel with LCD display complete system function keys for programming and control like system reset, Alarm Acknowledge, Alarm Silence, Trouble Acknowledge etc. as per specification. UL Listed / FM Approved

SITC of Analog Addressable multi sensor detector with LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for self diagnostics and history log, dust and dirt resistant with drift compensation, plug-in design, with compatible mounting bases, junction box and other accessories as required and working on 19 - 24 V DC supply all complete as required. The detectors shall be UL Listed / FM approved.

SITC of Analog Addressable Photo-electric type, smoke detector with Bi-colour LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for self diagnostics and history log, dust and dirt resistant with drift compensation, plug-in design, with compatible mounting bases, junction box and other accessories as required and working on 19 - 24 V DC supply all complete as required. The detectors shall be UL Listed / FM approved.

Supply, installation, testing & Commissioning of Addressable Manual call points. The same shall be of ABS plastic, square in shape and 4 "x 4" in size. It shall have a "Break glass" message embedded on the glass. The addressable module shall be enclosed along with the break glass in a junction box.

Supply, installation, testing & Commissioning of Addressable sounders, The sounder shall be made of ABS plastic and have the Db level of 90dbs and a multi tone facility. The addressable control Module shall be fitted in a junction box.

Supply, installation, testing & Commissioning of Addressable strobe cum sounder. The strobe cum sounder shall be made of ABS plastic and have the Db level of 90dbs and a multi tone facility. The addressable control Module shall be fitted in a junction box.

Supply, installation, testing & Commissioning Addressable Fault isolator modules

Supply, installation, testing & Commissioning Addressable Control modules for AHU / PAC trip off

Supply, installation, testing & Commissioning Addressable Control modules for Access trip off

Supply, installation, testing & Commissioning Addressable Control modules for Public Address system

Supply, installation, testing & Commissioning Addressable monitor modules for Sprinkler Flow switches + VESDA system

Supply, installation, testing & Commissioning of Battery pack suitable for back up of 4 hours with charger in case of Alarm condition.

Supply, installation, testing & Commissioning of response indicator

Supply, installation, testing & Commissioning of 2c x 1.5 Sq.mm FRLS Armoured cable RED in colour

SITC of FRLS PVC Conduits with all accessories of following sizes ( Heavy duty). (a) 20 mm dia.

b) 25 mm dia.

Supply, installation, testing & Commissioning Fire Exit Signage boards with 3hrs battery backup

SITC of RS 485 cable for repeater panel Size 4C X 1.5 sq.mm, cu conductor cable.

Fixing, testing and commissioning of Electrical Motor Driven Main Hydrant Pump of centrifugal horizontal end suction type with gland packing and capacity of 96M3/Hour@70Mtr Head.The pump shall be coupled to TEFC motor of suitable HP & speed and complete set shall mounted on common base frame . The quoted rate shall includes providing & fixing of coupling, coupling gaurd,matching flanges for suction & delivery side, Foundation bolts and foundation as recommended by manufacturer etc. (Make: Lubi/ Kirloskar)

Fixing, testing and commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction back pull out type with gland packing and capacity of 96M3/Hour@70Mtr Head. The pump shall coupled to suitable HP of Diesel engine radiator water cooled type and mounted on common base frame. Batteries & battery leads with stand, Fuel tank (For 6 Hrs. running and filled fully) with stand & gauge glass & Fuel piping with valves etc. The quoted rate shall includes coupling guard, and other standard accessories and foundation bolts, etc. complete.(Stand By) (Make: Lubi/ Kirloskar)

Fixing, testing and commissioning ofsuction type with gland packing and capacity of 10.8M3/Hour@70Mtr Head.The pump shall be coupled to TEFC motor of suitable HP & speed and complete set shall mounted on common base frame . The quoted rate shall includes providing & fixing coupling, coupling gaurd,matching flanges for suction & delivery side, Foundation bolts etc.(Make: Lubi/ Kirloskar)

Providing, fixing, testing & commissioning of Floor mounted Common Control Fire Pump Panel fabricated from 2mm/1.6mm thick CRCA sheet duly phosphatized and powder coated suitable for receiving 415 Volts, 50Hz, 3 phase AC supply , including providing and fixing the following switch gears, metering and protective devices, suitable size TPN aluminium busbars, connections, inter connections, earthing etc. as required as per specifications.( Approval of GA drawings/Make of material by client is mandatory prior to fabrication of Panel)

Providing, fixing, testing and commissioning of below Cable for Fire Pumps (Only from Panel to Pumps) (Make: Polycab/Avocab/Mecab) a) 3.5 C X 35 sqmm Alluminium Armoured cable.

b) 3 C X 10 Sqmm Alluminium Armoured cable.

c) 2 C X 1.5 Sqmm Copper Armoured Cable.

d) Perforated G.I.sheet cable tray Cable Tray .300X300X50mm .

e) Perforated G.I.sheet cable tray Cable Tray .150X150X50mm .

Providing, fixing, testing & commissioning of Glicerin Filled 150mm dia dial type Pressure Gauge and range of 0-15 Kg/cm2. (Make: H.Guru/Feibig)

Providing, fixing, testing & commissioning of Pressure Switches for automation of fire pumps. Pressure switches shall be double pole single throw type suitable for 3 phase supply with diaphragm. Aluminum Enclosure with IP 66 protection as required.. (Make: Indfoss/Danfoss)

Providing, fixing, testing & commissioning of Air Vessel fabricated from M.S. sheet with dished ends and suitable supporting legs, with required necessary valves and connection with required accessories. (Size 350mm dia ,1500mm long)

Providing, fixing, testing & commissioning of C.I.Butterfly valve conforming to IS:13095 class PN 10 rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc.of size: (Make: Sant/CRI/Audco) a) 150mm dia.

b) 100mm dia.

c) 80mm dia.

d) 65mm dia.

e) 50mm dia

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return Valve class PN 10 rating with fittings, flanges, nutbolts, washers, gaskets etc.of sizes: (Make: SANT/CRI/Zoloto/Advance) a) 150mm dia.

b) 65mm dia

Providing, fixing, testing and commissioning of 'Y' Type Strainer with all fittings & fixtures. (Make: Worth Valve/Normex/Leader) a) 150mm dia

b) 80mm dia.

Providing, fixing, testing and commissioning of SS Ball Valves ,Body - Forged or Cast Carbon Steel ,Trim and Ball SS410 , Seat SS410 and tested to 20 kg/cm2 pressure. Threaded End a) 25mm dia

b) 15mm dia

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class Heavy duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer and 2 or more coats of synthetic enamel paint of approved make / shade complete as per specification. (Make: Surya Prakash/Jindal/Asian) a) 150mm dia

b) 100mm dia

c) 80mm dia

d) 65mm dia

e) 50mm dia

f) 25mm dia

Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C Class Heavy duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating and providing all fittings like flanges, elbow with all required. (Make: Surya Prakash/Jindal/Asian) a) 150mm dia.

b) 80mm dia.

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class Heavy duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all fittings like flanges, bends, elbows, reducers, clamps, hangers etc. with painting of one coat of red oxide primer and 2 or more coats of synthetic enamel PO red paint of approved make / shade complete as per specification. (Make: Surya Prakash/Jindal/Asian) a) 150mm dia.

b) 100mm dia.

c) 80mm dia

Providing, fixing, testing & commissioning of C.I.Butterfly valve conforming to IS:13095 class PN 10 rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc.of size: (Make: Sant/CRI/Audco) a) 150mm dia.

b) 100mm dia.

c) 80mm dia.

Providing, fixing, testing and commissioning of SS Body Single Headed Oblique Pattern Hydrant Landing Valves as per IS: 5290 with 80 mm dia flanged inlet & 63 mm dia female outlet complete with cap and chain etc. (Make: AAAG/Swati/Safex)

Providing, fixing, testing and commissioning of 63 mm dia 15m long RRL Hose Pipe with 63 mm dia.Type B Male and female couplings duly binded with GI wire, rivets etc. conforming to IS 636 as required. (Make: AAAG/Swati/Safex)

Providing, fixing, testing and commissioning of SS Branch Pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling. As per IS:903 (Make: AAAG/Swati/Safex)

Providing, fixing, testing and commissioning of weather proof standard fire Hose Cabinet wall mounting type 18 Guage. (750 x 600 x 250) having Double Opening with M.S. fabricated stand, necessary locking arrangement by allan key. (Make: AAAG/Swati/Safex)

Providing, fixing, testing and commissioning of Wall mounting swing type first aid Fire Hose Reel with drum, hanging bracket, 36 M x 25 mm dia high pressure hose reel tubing as per IS:884 with shut nozzle and ball valve and all required accessories. (Make: AAAG/Swati/Safex)

Providing, fixing, testing and commissioning of Air Release Valve with 25mm dia Ball Valve. (Make: Sant/ Zoloto/ AAAG) (In Hydrant Ring)

Providing, fixing, testing and commissioning of CI 4 way Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet. ( For System Filling) (Make: AAAG/Swati/Safex)

Providing & fixing of ABC 6 Kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Controllable discharge mechanism Class A Rating 3A & Class B rating 21B as per IS 15683 (Make: Kanex/Safex/Fire Stone)

Providing & fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 bearing ISI mark. Co2 cylinder as per IS 7285 (Make: Kanex/Safex/Fire Stone)

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class Heavy duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer and 2 or more coats of synthetic enamel paint of approved make / shade complete as per specification. (Make: Surya Prakash/Jindal/Asian) a) 80mm dia.

b) 50mm dia.

c) 40mm dia.

d) 25mm dia

Providing, fixing, testing & commissioning of C.I.Butterfly valve conforming to IS:13095 class PN 10 rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc.of size: (Make: Sant/CRI/Audco) 80mm dia.

Providing and fixing, testing and commissioning of K 5.6 Pendent type Standard Response Sprinkler rating of 57 deg.C. with required accessories. (Make: HD/ Tyco/Unique)

Structure Steel for Hydrant & Sprinkler System Piping work

Hooter

10 Zone Panal for Fire Alarm System.

2 core X1.5 sqmm.Flexible cable with PVC Condiut for Fire Alarm System.

On-Off Switch

3 core X1.5 sqmm Flexible cable with pvc conduit for On-Off Switch.

Fire Fighting Equipements 8” X 12”

" Fire extinguisher" 8"x 4"

In Case of Fire do not use Lift ,Use Staircase 8"x 8"

Anand Associates

SURAJ CORPORATION

Shanti Structure Pvt Ltd