Misc Tanks at Site Fabricated and Agitators for Slurry Tanks for 2X660MW MAHAGENCO KORADI TPP Unit 11 and 2X660MW TALCHER TPS

The specification covers Supply part, Services part, Engineering charges and Mandatory spares for Miscellaneous FGD Tanks and Agitators package, comprising of design (i.e. Preparation and submission of drawing /documents including “As Built” drawings and O&M manuals), engineering, manufacture, fabrication, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, erection & maintenance tools & tackles, fill of lubricants & consumables till handing over, mandatory spares along with spares for erection, start-up and commissioning, forwarding, proper packing, shipment and delivery at site, unloading, handling, transportation & storage at site, in-site transportation, fabrication and erection & commissioning of tanks, lining and agitators, trial run at site and carrying out Performance guarantee tests at site, training of customer/ client O&M staff covering all aspects of the Agitator & lining - Operation & Maintenance, Troubleshooting etc., handover in flawless condition of the package to the End customer, complete with all accessories cover under scope of work. The scope shall also include (i) Supervision by Agitator OEM personnel at site during agitator erection and commissioning, performance testing and training to End customer. (ii) Erection & commissioning of lining (rubber lining & glass flake) and performance test at site in tanks and drain sump shall be by lining OEM only under the supervision of bidder. The above scope shall be as per BHEL NIT & tender technical specification, amendment & agreements till placement of order of the MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS PACAKGE for 2 x 660 MW KORADI TPS UNITS - 11 & 12. (Break-up as per Annexure-I. The total price at Annexure-I should match the price % criteria of 75 % apearing here at 1.1 ).

The specification also covers Supply part, Services part, Engineering charges and Mandatory spares for Agitators package, comprising of design (i.e. Preparation and submission of drawing /documents including “As Built” drawings and O&M manuals), engineering, manufacture, fabrication, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, erection & maintenance tools & tackles, fill of lubricants & consumables till handing over, mandatory spares along with spares for erection, start-up and commissioning, forwarding, proper packing, shipment and delivery at site including unloading, handling upto the BHEL store for safely handover. Services part covers supervision by agitator OEM along with package supplier at site during the reconciliation of supplied material, assembly, erection & commissioning, trial run at site and carrying out Performance guarantee tests at site, training of customer/ client O&M staff covering all aspects of the Agitator - Operation & Maintenance, Troubleshooting etc. & handover in flawless condition of the package to the customer, complete with all accessories cover under scope of work as per BHEL NIT & tender technical specification, amendment & agreements till placement of order of the AGITATORS PACAKGE for 2 x 660 MW TALCHER TPP STAGE‐III (Break-up as per Annexure-II. The total price at Annexure-II should match the price % criteria of 25% apearing here at 1.2 ).

Doc No:

2 x 660 MW KORADI TPS UNITS - 11 & 12

MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS

PE-TS-497/527-167-A001

DESCRIPTION

BREAK-UP OF PRICES GIVEN AT 1.1 OF MAIN SHEET

Total lump sum firm price inclusive of all prevailing taxes, duties and other levies for Supply part comprising of comprising of manufacture, fabrication, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, erection & maintenance tools & tackles, fill of lubricants & consumables till handing over, spares for erection, start-up and commissioning, forwarding, proper packing, shipment and delivery at site, for the total scope defined as per BHEL NIT & tender technical specification as specified above, amendment & agreements till placement of order. (Break-up as per Annexure-I(i)).

Total lumpsum firm prices inclusive of all prevailing taxes, duties and other levies for Services part comprising of unloading, handling, transportation & storage at site, in-site transportation, fabrication and erection & commissioning of tanks, lining and agitators, trial run at site and carrying out Performance guarantee tests at site, training of customer/ client O&M staff covering all aspects of the Agitator & lining - Operation & Maintenance, Troubleshooting etc., handover in flawless condition of the package to the End customer, complete with all accessories for the total scope defined as per BHEL NIT & tender technical specification as specified above, amendment & agreements till placement of order. (Break-up as per Annexure-I(ii)). The scope shall also include (i) Supervision by Agitator OEM personnel at site during agitator erection and commissioning, performance testing and training to End customer. (ii) Erection & commissioning of lining (rubber lining & glass flake) and performance test at site in tanks and drain sump shall be by lining OEM only under the supervision of bidder.

Total lumpsum firm price inclusive of all prevailing taxes, duties and other levies for Mandatory spares comprising of manufacture, fabrication, assembly, inspection / testing (as applicable) at vendor's & sub-vendor’s works, painting, forwarding, proper packing, shipment, delivery at site, including unloading, handling upto the End Customer store for safely handover & guarantee as per tender technical specification above, amendment & agreements till placement of order. (Break-Up as per Annexure-I(iii)).

Total lumpsum firm price for Design (i.e Preparation & submission of drawings/documents including " AS BUILT" drawings, STAAD analysis, FEA analysis for slurry tank and O&M Manuals & Erection Manual) and engineering as per tender technical specification above, amendment & agreements till placement of order.

Total Price covering Supply part, Services part, Engineering charges and Mandatory spares for MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS PACAKGE for 2 x 660 MW KORADI TPS UNITS - 11 & 12

Designation

Doc No:

2 x 660 MW KORADI TPS UNITS - 11 & 12

MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS

PE-TS-497/527-167-A001

Description

Supply of plates for tanks for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Condensate storage tanks including NaOH Breather and Seal Pot - 2 nos. ii) Process Water Tank - 1 no. iii) Clear Water Tank - 1 no. iv) Belt wash Tank - 1 no. v) Cake wash Tank - 1 no. vi) Auxiliary Absorbent Tanks - 2 nos. vii) Lime Stone Slurry Storage Tanks - 2 nos. viii) Primary Hydro Cyclone Feed Tank - 1 no. ix) Secondary Hydro Cyclone Feed Tank - 1 no. x) Waste Water Storage Tank - 1 no. xi) Filtrate Water Tank - 1 no.

Supply of structural steel for tanks, structural steel for agitator supporting structure & agitator bridge (as applicable), nozzles, flanges, manholes, earthing lugs, pipes & fittings, hand railing, grating, fasteners & gaskets, foundation bolts, name plate, any other item requried for tanks for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Condensate storage tanks including NaOH Breather and Seal Pot - 2 nos. ii) Process Water Tank - 1 no. iii) Clear Water Tank - 1 no. iv) Belt wash Tank - 1 no. v) Cake wash Tank - no. vi) Auxiliary Absorbent Tanks - 2 nos. vii) Lime Stone Slurry Storage Tanks - 2 nos. viii) Primary Hydro Cyclone Feed Tank - 1 no. ix) Secondary Hydro Cyclone Feed Tank - 1 no. x) Waste Water Storage Tank - 1 no. xi) Filtrate Water Tank - 1 no. xii) Lime Stone Area Drain Sump - 1 no. xiii) Absorber Area Drain Sumps - 2 nos. xiv) Gypsum Area Drain Sump - 1 no.

Supply of paint, Lining including adhesives (as applicable) etc. for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Condensate storage tanks including NaOH Breather and Seal Pot - 2 nos. ii) Process Water Tank - 1 no. iii) Clear Water Tank - 1 no. iv) Belt wash Tank - 1 no. v) Cake wash Tank - 1 no. vi) Auxiliary Absorbent Tanks - 2 nos. vii) Lime Stone Slurry Storage Tanks - 2 nos. viii) Primary Hydro Cyclone Feed Tank - 1 no. ix) Secondary Hydro Cyclone Feed Tank - 1 no. x) Waste Water Storage Tank - 1 no. xi) Filtrate Water Tank - 1 no. xii) Lime Stone Area Drain Sump - 1 no. xiii) Absorber Area Drain Sumps - 2 nos. xiv) Gypsum Area Drain Sump - 1 no.

Supply of Auxiliary Absorbent Tank Agitators, horizontal type, comprising of Complete Agitator Assembly, Gearbox/ V-belt drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft, Mechanical Seal, Mounting flanges with necessary fasteners and gasket, flushing arrangement, support legs with fasteners, lining, painting at site.

Supply of Limestone slurry storage tank agitators, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft, Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Primary hydro-cyclone feed tank agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Secondary hydrocyclone feed tank agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Filtrate water Tank Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Waste Water Tank Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Absorber Area Drain Sump Agitators, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Gypsum Area Drain Sump Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Limestone area drain sump agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of instruments, valves, checmical for NaOH Breather and Seal Pot for Condensate storage tanks - 2 nos.

Supply of complete set of cable glands & lugs, cable trays/conduit for the all Agitator motor's

Supply of complete set of tools and tackles for erection and maintenance for horizontal agitators and vertical agitators,

TOTAL PRICE OF MAIN SUPPLY

Designation

Doc No:

2 x 660 MW KORADI TPS UNITS - 11 & 12

MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS

PE-TS-497/527-167-A001

Description

Fabrication, Erection & commissioning of complete tanks for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Condensate storage tanks including NaOH Breather and Seal Pot - 2 nos. ii) Process Water Tank - 1 no. iii) Clear Water Tank - 1 no. iv) Belt wash Tank - 1 no. v) Cake wash Tank - 1 no. vi) Auxiliary Absorbent Tanks - 2 nos. vii) Lime Stone Slurry Storage Tanks - 2 nos. viii) Primary Hydro Cyclone Feed Tank - 1 no. ix) Secondary Hydro Cyclone Feed Tank - 1 no. x) Waste Water Storage Tank - 1 no. xi) Filtrate Water Tank - 1 no.

Fabrication, Erection & commissioning of agitator supporting structure & agitator bridge (as applicable) for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Auxiliary Absorbent Tanks - 2 nos. ii) Lime Stone Slurry Storage Tanks - 2 nos. iii) Primary Hydro Cyclone Feed Tank - 1 no. iv) Secondary Hydro Cyclone Feed Tank - 1 no. v) Waste Water Storage Tank - 1 no. vi) Filtrate Water Tank - 1 no. vii) Lime Stone Area Drain Sump - 1 no. viii) Absorber Area Drain Sumps - 2 nos. ix) Gypsum Area Drain Sump - 1 no.

Application of paint, Lining including adhesives (as applicable) by lining OEM, for tanks for the total sope defined in technical specification (PE-TS-497/527-167-A001). i) Condensate storage tanks including NaOH Breather and Seal Pot - 2 nos. ii) Process Water Tank - 1 no. iii) Clear Water Tank - 1 no. iv) Belt wash Tank - 1 no. v) Cake wash Tank - 1 no. vi) Auxiliary Absorbent Tanks - 2 nos. vii) Lime Stone Slurry Storage Tanks - 2 nos. viii) Primary Hydro Cyclone Feed Tank - 1 no. ix) Secondary Hydro Cyclone Feed Tank - 1 no. x) Waste Water Storage Tank - 1 no. xi) Filtrate Water Tank - 1 no. xii) Lime Stone Area Drain Sump - 1 no. xiii) Absorber Area Drain Sumps - 2 nos. xiv) Gypsum Area Drain Sump - 1 no.

Erection & commissioning of Agitators (Vertical & Horizontal type), including power cable laying & termination, paining at site (as applicable), flushing arrangement (as applicable).

Erection & commissioning of instruments, valves, checmical for NaOH Breather and Seal Pot for Condensate storage tanks - 2 nos.

Total Lump sump price for successful conductance of Performance Guarantee test and handover in flawless condition of the package to the customer.

Total lump sum prices for the site visits (should include travel expenses to/ fro site, visa/ insurance as applicable, intermediary stay) for Supervision by Agitator OEM for assembly, erection and commissioning, trial run, PG test at site & taining to O&M staff.

Total lump sum prices including service charges, local transportation, boarding, lodging & other related exepenses for Supervision by Agitator OEM of assembly, erection and commissioning, trial run at site & training to O&M staff by Agitator OEM.

TOTAL PRICE OF E&C

Designation

Doc No:

2 x 660 MW KORADI TPS UNITS - 11 & 12

MISCELLANEOUS TANKS - SITE FABRICATED AND AGITATORS

PE-TS-497/527-167-A001

DESCRIPTION

AUXILIARY ABSORBENT TANK AGITATOR (SIDE ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

LIMESTONE INTERMEDIATE SLURRY TANK AGITATORS (TOP ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

PRIMARY HYDRO-CYCLONE FEED TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

SECONDARY HYDROCYCLONE FEED TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

FILTRATE WATER TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

WASTE WATER TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

AGITATOR FOR DRAIN SUMP (FOR ABSORBER AREA, GYPSEM AREA, LIMESTGONE AREA) (TOP ENTRY). If the type & size of drain sump agitators offered by bidder is different for each type, in such case, bidder to provide mandatory spares for each type and size separately.

Impeller Assembly

Bearings

Shaft assembly

Shaft seal

415V MOTORS

Terminal plates for motors upto 30kw for each rating

Terminal plates for motors above 30kw for each rating

Heaters

Greasing arrangements

Motor of each type and rating

Bearings (DE and NDE)

End shield cover driving of non driving end

Cooling fan

Motor terminal block

Complete set of coupling

LEVEL INDICATOR FOR CONDENSATE STORAGE TANKS

LOW PRESSSURE PIPING FOR CONDENSATE STORAGE TANKS

Valves all sizes & type NOTE: 1. If there is one no valve only of particular type, class, and size then only one no is required. 2. Wherever valves are specified as mandatory spare, complete valve along with actuator and all other accessories which are the part of original supply shall also be supplied.

TOTAL PRICE OF MANDATORY SPARES

Designation

Doc No:

2 x 660 MW TALCHER TPP STAGE‐III

AGITATORS

PE-TS-497/527-167-A001

DESCRIPTION

BREAK-UP OF PRICES GIVEN AT 1.2 OF MAIN SHEET

Total lump sum firm price for Supply part comprising of manufacture, fabrication, assembly, inspection / testing at vendor's & sub-vendor’s works, painting, erection & maintenance tools & tackles, fill of lubricants & consumables till handing over, spares for erection, start-up and commissioning, forwarding, proper packing, shipment and delivery at site, for the total scope defined as per BHEL NIT & tender technical specification as specified above, amendment & agreements till placement of order. (Break-up as per Annexure-II(i)).

Total lumpsum firm prices for Services part comprising of transportation & unloading at Site, handling up to BHEL store for safely handover, including supervision by agitator OEM along with package supplier at site during the reconciliation of supplied material, assembly, erection & commissioning, trial run at site and carrying out Performance guarantee tests at site, training of customer/ client O&M staff covering all aspects of the Agitator - Operation & Maintenance, Troubleshooting etc. & handover in flawless condition of the package to the customer, complete with all accessories cover under scope of work as per BHEL NIT & tender technical specification, amendment & agreements till placement of order. (Break-up as per Annexure-II(ii)).

Total lumpsum firm price for Mandatory spares comprising of manufacture, fabrication, assembly, inspection / testing (as applicable) at vendor's & sub-vendor’s works, painting, forwarding, proper packing, shipment, delivery at site, including unloading, handling upto the End Customer store for safely handover & guarantee as per tender technical specification above, amendment & agreements till placement of order. (Break-Up as per Annexure-II(iii)).

Total lumpsum firm price for Design (i.e Preparation & submission of drawings/documents including " AS BUILT" drawings, and O&M Manuals & Erection Manual) and engineering as per tender technical specification above, amendment & agreements till placement of order.

Total Price covering Supply part, Services part, Engineering charges and Mandatory spares for AGITATORS PACAKGE for 2 x 660 MW TALCHER TPP STAGE‐III.

Designation

Doc No:

2 x 660 MW TALCHER TPP STAGE‐III

AGITATORS

PE-TS-497/527-167-A001

Description

Supply of Auxiliary Absorbent Tank Agitators, horizontal type, comprising of Complete Agitator Assembly, Gearbox/ V-belt drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft, Mechanical Seal, Mounting flanges with necessary fasteners and gasket, flushing arrangement, support legs with fasteners, lining, painting at site.

Supply of Limestone slurry storage tank agitators, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft, Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Primary hydro-cyclone feed tank agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Secondary hydrocyclone feed tank agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Filtrate water Tank Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Waste Water Tank Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Absorber Area Drain Sump Agitators, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Gypsum Area Drain Sump Agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of Limestone area drain sump agitator, vertical type, comprising of Complete Agitator Assembly, Gearbox drive with Motor, All couplings- Motor to Gearbox and Gearbox to shaft,Mounting flanges with necessary fasteners and gasket, lining, painting at site.

Supply of complete set of cable glands & lugs, cable trays/conduit for the all Agitator motor's

Supply of complete set of tools and tackles for erection and maintenance for horizontal agitators and vertical agitators,

TOTAL PRICE OF MAIN SUPPLY

Designation

Doc No:

2 x 660 MW TALCHER TPP STAGE‐III

AGITATORS

PE-TS-497/527-167-A001

Description

Total Lump sump price for transportation & unloading at Site, handling up to BHEL store.

Total Lump sump price for successful conductance of Performance Guarantee test and handover in flawless condition of the package to the customer.

Total lump sum prices for the site visits (should include travel expenses to/ fro site, visa/ insurance as applicable, intermediary stay) for Supervision by Agitator OEM for assembly, erection and commissioning, trial run, PG test at site & taining to O&M staff.

Total lump sum prices including service charges, local transportation, boarding, lodging & other related exepenses for Supervision by Agitator OEM of assembly, erection and commissioning, trial run at site & training to O&M staff by Agitator OEM.

TOTAL PRICE OF Supervision of E&C

Designation

Doc No:

2 x 660 MW TALCHER TPP STAGE‐III

AGITATORS

PE-TS-497/527-167-A001

DESCRIPTION

AUXILIARY ABSORBENT TANK AGITATOR (SIDE ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

LIMESTONE INTERMEDIATE SLURRY TANK AGITATORS (TOP ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

PRIMARY HYDRO-CYCLONE FEED TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

SECONDARY HYDROCYCLONE FEED TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

FILTRATE WATER TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

WASTE WATER TANK AGITATOR (TOP ENTRY)

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

AGITATOR FOR DRAIN SUMP (FOR ABSORBER AREA, GYPSEM AREA, LIMESTONE AREA) (TOP ENTRY). If the type & size of drain sump agitators offered by bidder is different for each type, in such case, bidder to provide mandatory spares for each type and size separately.

Impeller Assembly

Bearings Assembly

Motor

Belt and Pulley(if applicable)

Gear Box Assembly (if applicable)

TOTAL PRICE OF MANDATORY SPARES

Designation