Supply and delivery and installation of different Spare Parts and repairing of truck of existing Mobile Water Treatment Unit - 8 under Eastern Mechanical Division, P.H.E. Dte. in the Dist.- 24Pgs(N).

Amount

Supply, delivery at site of Membrane element for RO unit, Capacity 2000 lit/hr. Suitable for installation in RO vessel diameter 8 " & length 40". as per following specification:- a)Permeate Flow: - Minimum 10000 gpd (3.75 m³ /d) b) salt Rejection :- (99.5% minimum) c) Configuration : - Spiral wound d) Membrane polymer:- Composite Polyamide e) Nominal membrane Area:- Minimum 365ft² (33.9m²) f) Maximum applied pressure:- above 450 psi g) Maximum operation temperature :- Not above 122°F (50°C) h) pH range, continuous (Cleaning) :- 2-11 (1-13)* i) Maximum Feed water Turbidity :- Upto 1.0 NTU j) Maximum Feed water SDI (15 mins) :- Upto 5.0 k) Maximum Feed Flow:- 75 GPM (17.0 m³ /h ) l) Minimum Ratio of Concentrate to permeate Flow any Element:- 5.1 m) Maximum pressure drop for Each Element:-10 psi (Make- Hydranautics /Dow/Toray/GE/any approved make)

Installation and Commissioning of RO unit. Capacity 2000 lit/hr. suitable for RO vesel dameter 8" & length with through checking & testing complete. (Supplied by Departmentally)

Supply, delivery at site of UF unit for removing all undisclosed impurities including suspended solids, colidall impurities having Feed Pressure-5 Bar, Operating Tran membrane Pressure -2 psig, Maximum Backwash- 20 psig as per following specification:- a) Filtrate Flow- 12.1-29.5 gpm 2.7-6.7m³/hr) b) Filtrate Turbidity-≥00.7 NTU c)Virus removal-≥ 4 log d) Bacteria removal-≥ 4 log e) Configaration :- Capillary Ultrarafitration Module f) Membrane Polymar:- Hydrophilic Poly thersulfone g) Nominal Membrance Area :- 500 ft²(46m² ) or above h) Fiber Dimensions- ID 0.031" (0.8mm) OD 0.055" (1.4mm) i) Pore size:- 0.02 micron or less j) Typical Filtrate Flux Range:- 35-85 gfd (59-145l/m²/h) k) Maximum Applied Feed Pressure. 73 psig (5bar) l) Maximum Transmenibrane Pressure - 20psig (1.4 bar) m) Maximum backwash transtnembrance Pressure :- 20 usig (1.4 bar) n) Instantaneous Chlorine Tolerance :- 100 ppm o) Instantaneous Hydrogen Peroxide Tolerance :- 200 ppm** p) maximum chlorine Expossure :-200.000ppm-hrs q) maximum instantaneous Feed Turbidity :- 100 NTU r) Maximum Operating Temperature:- 104° F s) pH operatin range:- 4.0-10.0 t) Clraning pH Range- 1.5-13.0 u) Operating Mode:- Inside to Outside Filtration Direct flow of Crossflow.

v) Backwash flux-100-150 gfd (170-255 l/m²/hr) w) Backwash Duration -30-60 seconds. x) Backwash Frequency-20-60 minutes. y) Chemical Enhanced Backwash Frequrncy-0-4 ties per day z) Chemical Enhanced Backwash Duration-1-30 minutes z1) Disinfection Chemicals -Na0CL, H₂o₂, CLO₂, or , NH₂CL z2) Cleani9ng Chemicals -NaOH, HCL, H₂SO₄, or Citric Acid (Make- Suez/Dow/Toray/any approved make)

Installation and Commissioning of UF unit for removing all undissolved impurities including suspended solids, colidall impurities having Feed Prussure-5 Bar. .

Supply, delivery at site of SS Micron Cartridge Filter/Busket strainer for UF unit-100 micron SS, 20" long (Jumbo Type) ID - 50mm OD - 100mm Length - 500mm Flow Capacity - 6 m3/hr construction, core not required. Clean DP - 100 mbar Maximum Operating Temperature - 200 deg C

Supply and delivery at site of 5 Micron jumbo wond type pre filter Cartridge of R.O Filter assembly with below mention specification. a) ID:- 4.5" b) O.D :- 6" c) Length :- 20" d) Flow capacity :- 5m³/hr e) Care Cover Material:- Poly Propylenem f) Care :- Poly Propylenem g) Clean Ps 10 Psid h) Maximum Operating Temperature :- 120°F (49°C)

Supply, delivery, Installation & Commissioning of 500 lit capacity PVC Tank (Rectrangular Shape, White Color) for storage of Water of different stages. Make- Sintex/Patton/any approved make)

Supply, delivery ,Installation and Commissioning of Front tyer of truck MRF 920 (16Ply rating 8.25-20)

Supply, delivery ,Installation and Commissioning of 40mm of Victrolic Coupling.

Supply, delivery ,Installation and Commissioning of 50mm of Victrolic Coupling.

Supply and delivery at site of Online Rotameter R/O Range 5000 LPH.Make- Aster/any approved make)

Supply and delivery at site of Push Bottom Switch .

Supply and delivery at site of 8 mm dia Pneumatic Pipe for Pouch Packing Machine.

Supply and delivery of Pneumatic Connector 1/2 " x 8 mm dia for Pouch Packing Machine.

Servicing charges, testing , checking of the control Panel circuit board and input PCB motor control panel circuit board for controlling ozonetor by the technical person as per direction of EIC.

Making new internal wiring and fettling illumination arrangement inside the MTU unit by replacement of 03 Nos tube set ,01 no. fan and wires as per requirement as per direction of EIC.

Repairing of MTU Truck driver Cabin with denting and painting including supplying necessary materials after taken out the damaged portion all complete the job as per direction.

Supply, delivery and painting of Chorinated rubber paint including brushing application of primer to the entire floor of the MTU.

Dismantling of the whole water treatment plant unit from the truck and thereafter installation and commissioning of the whole water Treatment Plant including change of pipelines of 1 ½’ CVPC pipes of quantity 100 ft approx including replacement of valve and repairing of the skid etc as per full satisfaction of the EIC to get the proper production of pouches .

Repairing of the whole body of the truck including the base of the body to be replace by MS Plate of minimum 5 mm thickness to accommodate the generator and water treatment plant inside of the truck including complete paint and polishing of the whole body of the MTU and write the matter on the side of the truck including supply of the materials as per existing design and as per direction of EIC.

Supply & delivery of Teflon Tape (18 x 300 mm imported)

Supply & delivery of Teflon Cloth Vertical (175 x 500 mm TT imported).

Supply & delivery of Teflon Cloth Horizontal (210 x 500 mm TT imported).

Supply & delivery of Rubber Strip ( 4mm x 18mm x 4 mm)

Supply & delivery of Syntonium Strip (H 4mm x W 18 mm x 185mm)

Supply & delivery of Horizontal Side Spring (SS) ( OD-28, ID-22, WD-3, L-100mm) as per departmental sample.

Supply and delivery of Horizontal &Vertical Electrode, L = 190 mm

Supply and delivery of PLC Unit for Pouch Packing Machine

Supply and delivery of Digital Controller as per Departmental Sample (Push button type)

Supply and delivery of Magnetic Coil .

Supply and delivery of Limit Switch as per Departmental Sample.

Supply and delivery of 2 in 1 Injection Switch -(10A) as per Departmental Sample.

Supply and delivery of Vertical Switch . (10A)

Supply and delivery of Horizontal Switch . (10A)

Supply and delivery of Chain Return Spring.

Supply and delivery of Vertical Spring.

Supply and delivery of Horizontal Spring.

Supply and delivery of Roller Adjustable Spring.

Supply and delivery of Magnet Coil Spring.

Supply and delivery of Control Transformer.

Supply and delivery of Horizontal Transformer.

Supply and delivery of Vertical Transformer.

Supply and delivery of Injection Spring for Pouch Packing Machine.

Supply and delivery of Cooling Pump for Pouch Packing Machine.

Supply and delivery of V Belt (A-29).

Supply and delivery of Injection Rod.

Supply and delivery of One side moveable bearing.

Supply & delivery at site of 3 layer poly film roll of width 325mm + 2% for 350ml. pouch, thickness of film should be 50 micron + 2%.

Following documents should be submitted at the time of delivery of Polyfilm roll :- a) Laboratory test report from India Institute of Packaging. b) Certificate from Pollution Control Board. c) Input Raw materials should be of food grade.

JDJ ENTERPRISE. A UNIT OF JDJ TRADERS PRIVATE LIMITED (BID ID -6694761)

CONCORD ENGINEERING (BID ID -6731382)