Carrying out repair and renovation job of Components Overhaul Division (COD) cleaning shop facility in Hanger #1 West Annex at AIESL, Engineering premises, OAP, Santacruz (East), Mumbai-400029

Civil Works

Electrical Works

Item Wise BoQ

BoQ_Ver3.0

Tender No: AIESL/BOM/MMD/EFD/PFD/01-05/138 Dated 08.01.2026

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Ground Floor including Breaking flooring/Waterproofing/PCC

Breaking flooring/pcc/soling/ cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix).

Removing WC /Basin/ Urinal

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Dismantling 15 to 40 mm dia G.I. pipe

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.

Removing Door & Ventilator

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below.

Plaster Breaking with dado

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

New PCC

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources).

Lintel work

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Laying Micro Concrete

Providing and laying/ pouring in position/ location SMC (Self leveling micro concrete) RENDRC RGL or equivalent as directed or as approved by EIC, mixing with specified quantity of water as recommended by the manufacturer including cutting the existing concrete floor to shape with cutting machine only, dismantling the existing concrete floor, cleaning the surface with water, taking rubbish out of AIESL premises, applying bond coat of RBR or equivalent and cement in proportion 1:1 including necessary approved centering and formwork, finishing top as directed including labour , tools plants etc complete.

New Flooring

Providing and fixing 10 mm thick acid and/or alkali resistant,antiskid tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

Plastering

Providing and laying internal plaster in C.M.(1:4) 12mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete.

New Dado

IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Ceiling Repair

Providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. Providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. Providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'BASF" (MASTER EMACO 348 S) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of AIESL/Airport premises.

Granite work

Providing and laying Polished Granite stone for door frame/ventilator in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent.

Aluminium for Door/Window/Ventilator

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) including Soft touch lock

Main Door

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) Door thickness: 30 mm thick.

Butt Hinges

Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm

Door Closer

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Tower bolts

Providing and fixing aluminium tower bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade , with necessary screws etc. complète

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) Door thickness: 30 mm thick

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm

Providing Aldrop

Providing and fixing aluminium sliding door bolts , ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) , transparent or dyed to required colour or shade , with nuts and screws etc. complete 300x16 mm

Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm

CPVC Plumbing line Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

Soling

25 mm nominal dia Pipes

PVC pipe (75mm)

Providing and fixing PVC rain / Waste water pipe of ‘’Prince’’ or equivalent approved make conforming to IS 13592 of SWR quality 4 kg/cm2 pressure rated, at any locations and at all levels, scaffolding etc. including all PVC fittings like bends, shoes, clamps, supports etc. jointing with rubber ring/ solvent cement, leak proof adhesive etc. cutting and making good the walls and floors etc. complete. As per instruction of EIC.40 mm dia with GI clamps & GI brackets(Vertical pipes should be fitted 50 mm away from the wall).

Soling

Providing and fixing PVC blind pipe 150 mm dia as per IS: 12818

Bib Cock

Providing and fixing brass bib cock of approved quality 20 mm nominal bore

Gun Metal gate valve Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

20 mm nominal bore

Soling

25 mm nominal bore

Paint

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.(Two coats)

SEP Painting

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

New Basin

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.including all fittings

Breaking plaster

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing & fixing sand cast iron floor or Nahani trap of self cleansing design with C.I. grating screwed down or hinged pattern with or without vent arm complete including cost of cutting and making good the walls and floors. 100mm inlet and 75mm outlet etc. complete.

Reinforcement

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade more. Fe-500D

Debris

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Glass for ventilator/ Window

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing MS structure for window Grill & partition , Column protection

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding and for grating

Chamber Grid Cover with Frame

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. L D- 2.5 Rectangular shape 600x450 mm internal dimensions

Brick work

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even smooth complete.

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and removing of exisiting laminate/ door skin. 1.00 mm thick

Item Wise BoQ

BoQ_Ver3.0

Tender No: AIESL/BOM/MMD/EFD/PFD/01-05/138 Dated 08.01.2026

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SITC of 12 way ETPN flameproof D.B. Incomer: 100 A MCB 4P Outgoing: 20A SP MCB 36 Nos. mounting with bracket and all connection and all other required hardware and consumables to complete the job.Approved make: L&T , SCHNEIDER, LEGRAND.

SITC of 12 way ETPN flameproof D.B. Incomer: 100 A MCB 4P Outgoing: 63A TP MCB 4Nos, 20-32A sp MCB 24 Nos. mounting with bracket and all connection and all other required hardware and consumables to complete the job. Approved make: Approved make: L&T , SCHNEIDER, LEGRAND

SITC of powder-coated industrial type 20A P+N+E socket with 2P MCB flameproof MS box mounting with bracket and all required hardware and connection.Approved make: Approved make: L&T , SCHNEIDER, LEGRAND

SITC of 4 feet ceiling mounted flameproof double tubelight fitting 20W each. Job includes light fitting mounting at ceiling with required hardware and consumeables. Approved make: Syska, Crompton, Surya, Philips.

Supply and laying of 2.5 sq mm 3 Core copper armoured cable with saddles, spacers,terminations, glands etc. and all other required hardwares and consumables to complete the job as directed by Engineer Incharge. Approved Make-Polycab,Finolux

Supply and laying of 4 sq. mm, 4-core copper armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC) Approved Make-Polycab,Finolux

Supply and laying of 50 sq. mm, 4-core Aluminium armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC). Approved Make-Polycab,Finolux

Supply and laying of 150 sq. mm, 4-core Aluminium armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC). Approved Make-Polycab,Finolux

SITC of powder-coated industrial type 20A 3P+N+E socket with 4P MCB flameproof MS box mounting with bracket and all required hardware and connection.Approved make: Approved make: L&T , SCHNEIDER, LEGRAND

SITC of Powder coated factory made 12 way SPN DD DB with new termination, fixing bracket and all other required hardwares and consumeables to complete the job as per instruction of EIC. Incomer - 32A 2P MCB, 1 no. Outgoing - SP 6-10A MCB, 10 nos. Approved makes - Schneider, Legrand,L&T.

SITC of 125A fn type switch with encloser mounting with bracket. Job includes installation of switch with all connection, termination and required hardware and material. Approved makes - Schneider, Legrand,L&T.

Removal of all unused cables and conduits, unwanted switches, along with the laying and saddling of all active cables and conduits in the COD Cleaning Section. The scope includes the removal and dumping the scrap at designated area as per instruction of EIC. necessary to complete the job, as per the directions of the Engineer-in-Charge (EIC).

Removal of existing Exhaust fans and reinstallation of the same after civil works completion.

SITC of 6 moduler 2 switch/ 2 socket for general use at various locations with 2.5 sqmm wire and 20mm MS conduit. Job include point wiring for switch board. Approved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Anchor/ GM/ Roma

Removal, shifting, reinstallation and commissioning of sanding M/c, Welding M/c, Grinding M/c, Therelac Oven, Wild Barfield Furnace, Air Pit Furnace, water tank.

Shifting & Installation of Chain Pully block (500 KG) as advised by EIC

Shifting of lathe machines (Qty.3), Grinder Machines (Qty.3) and Saw Machine (Qty.1) from COD, existing Machine Shop, Ground Floor, Hangar No. 1 to proposed COD Machine Shop (Old Fan T/R Section), Ground Floor , Hangar 2. Conect the equipment with respective electrical source.

FAN TR Section - Supply, Installation, testing and commissioning of 8-Way VTPN DD MCCB DB: Factory-made, powder-coated, 6-way distribution board with MCCBs and MCBs. Incomer (Main Incoming ): 200A, 4P MCCB, 1 no.( for incoming power supply). Outgoing Circuits: 3P, 63A MCBs, 8 nos. (for various outgoing loads). Approved Makes: Legrand/ Schneider for the MCCB, MCB, and other associated components.

Cable Connections: Incomer - 4C X 50 sqmm, Aluminum, Armoured, length - 50 M. and outgoing cables -4C X 4 sqmm, Copper, Armoured, length - 100 M Approved Makes: Polycab/ Anchor/ Finolex Job includes: laying and termination of cables with required lugs, glads, screw.fixing of D.B with bracket and IN/OUT connection,ALL complete with hardware, and consumables to complete the job in its totality.